"Tinmama" 1940 Chevy build FOR MOM (Ep. 8) Frame Painting

[@phatpunxs64]

I love how you take care of your parents...family first. Keep grinding!

[@TheCanadianBubba]

Proper tear down, and starting with such a well done base will make anything less than your best just look wrong. She is going to be a beauty ! Look forward to all you will be sharing along the way !

[@Tinman2Kustoms]

Thank you! It had already been coated once, but was with cheaper paint and looked so dirty after sitting in the shop for so many years. Thanks for watching!

[@Comiefornia]

Stoked on the build! Can’t wait to see it on the street rippin!

[@Tinman2Kustoms]

Well, my mom's old ass is gunna be driving it primarily....... so idk if much "ripping" is going to happen. But she will be rockin it low & slow, I know that lol

[@Comiefornia]

Tinman 2 Kustoms true... either way, it’s gunna be badass! Cheers bro!

[@Tinman2Kustoms]

Two people are mad at my fashion taste I guess?? lol Thumbs down to those bastards :P

[@ZeekDuff]

Screw the haters man, can't build a house OR a ride without a good foundation to start one with. You've definitely now got that great foundation solid and well-preserved to build up from. Nice job!!! Now, I gotta go backwards to see what I missed from the past couple of months... 🤓

[@1-Six-dee]

U keep doing exactly what u like u have been it is your vision that has brought u to this point if u built what everyone else like u wouldn't be unique or stand out it would be just another boring vehicle that most of anyone can put together out of a book basically

[@Tinman2Kustoms]

@@1-Six-dee that's true! Lol good words

[@badmofo6462]

Your mom's going to be stoked, keep up the good work man it's coming out dope.

[@Tinman2Kustoms]

That's the goal! Thank you for commenting and watching religiously

[@mikl911]

Really looking forward to more vids on this build! You are a good son!

[@Tinman2Kustoms]

Most of the time! lol thanks

[@Tinman2Kustoms]

More coming, just takes some time :)

[@1-Six-dee]

So excited man ik u will bring it this year juet as u always do

[@Tinman2Kustoms]

Damn right man!

[@davekimbler2308]

Your coming along nicely! You WILL make nationals this year ! Positive thinking ! Right ! I should have my truckster dune by then also it’s yellow and says - Minneapolis Parks Dept. on it ! Lol keep on chugging.

[@Tinman2Kustoms]

Street machine nationals is the deadline!!!! Can't be any later lol Young guns regional qualifying event for SEMA is at that show :O

[@bigdiesel7980]

Everything is rustproofed in the garage now haha love these builds

[@sf-wv9mt]

Love it, dude!

[@joeschlotthauer840]

Always take care of your mother... Dad too...

[@Tinman2Kustoms]

Always do. Moved back home to help them out, actually.

[@joeschlotthauer840]

@@Tinman2Kustoms I took care of mine...

[@Tinman2Kustoms]

@@joeschlotthauer840 yep! Gotta do what ya gotta do when you're the only boy

[@hermyherm365]

Dude I love your vids my bro !!

[@jcricket-vr5xr]

Bad ass for sure love these video's

[@100cockroach]

Tinman, What happened 2 ya, Just wonderin how the build id coming along?

[@rafatrill]

Love ur videos more videos longer and ur guffy lmao u always make me laugh

[@Tinman2Kustoms]

Lol thanks man. More videos are coming. They just take a lot of work & time.

[@johnsmith-qz4bv]

great video........do you have ep.9 on this build..?

[@Tinman2Kustoms]

It'll be coming some time. Just been busy

[@johnsmith-qz4bv]

@@Tinman2Kustoms thats cool cant wait to see the video.....great work

[@andrewmurray6772]

Rockin the crocs !! Did you have any Sema footage mate? Cheers from Australia:)

[@Tinman2Kustoms]

The only footage I got from SEMA was the "live" video of the unveling. Which is on my Tinman 2 Kustoms page. facebook.com/tinman2kustoms

[@jameswalker3416]

Wish you were my neighbor lol

[@Tinman2Kustoms]

lol some of my neighbors may disagree with you :P

[@OffTheJacks]

Good thing you got that rat poop out...hate to be calling your mom's hot rod the Rat "Poop" Rod. LOL

[@Tinman2Kustoms]

Hahaha! Always rats, even when I'm trying not to build one

[@79tazman]

Por15 is good shit don't get it on you because that shit is hard to get off it's kind of expensive but it's worth every penny when I use it I brush it on since it don't waste as much plus I use it where no one can see it like floor pans and inside fenders and quarters and frame

[@Tinman2Kustoms]

Right! I usually brush it on too. But for this one I wanted it to be as nice looking as possible. It is a little bit expensive, but it covers very well. Well worth every penny for sure!

[@andrewmurray6772]

hey mate, did rust proof your Crocs as well ? Cheers from Australia, your Mum is gunna LOVE this car ! :)

[@Tinman2Kustoms]

Lol! They're probably rust proof now. But I guess time will tell ;) thanks for watching!

[@jcricket-vr5xr]

hope everything is ok hope you make some videos soon

[@Tinman2Kustoms]

Yup everything is fine jusr been extremely busy! Video editing takes a ton of time, time I haven't had the last few months. I have been posting more on my Instagram and Facebook because that only takes a few minutes to do, versus one of these videos which takes 15-20 hours to do

[@jcricket-vr5xr]

ok did not know you had a instagram i will follow

[@Tinman2Kustoms]

@@jcricket-vr5xr yup I post progress on there almost everyday!!

[@Tinman2Kustoms]

@@jcricket-vr5xr on my Instagram "story"

[@doughopkinsjr]

Green socks and crocs!! Lmao. Now I'm not a smart man but the grass was green and you live in Minnesota. So how far along are you now?

[@Tinman2Kustoms]

Killer fashion sense, I know lmao this was last summer. Not much further along, just been doing body/metal cleanup work the last couple months, basically. And little stuff that isn't video worthy on its own yet.

[@doughopkinsjr]

@@Tinman2Kustoms sweet man cant wait for the weather to break. Keep us up on what you doing.

[@Tinman2Kustoms]

@@doughopkinsjr I try to! Haha my Instagram is more accurate time wise.

[@richardw0929]

HELLO TRYING TO BUY A 55 WITH A S-10 SWAP NOT SURE WHAT I AM LOOKING AT WITH THE FRAME PICS LOOKS WRONG DO YOU HAVE A EMAIL I CAN SEND A COUPLE PHOTOS PLEASE HELP? OR ANYONE WITH FRAME EXPERIENCE...

[@Docandballtorture7756]

What was the total price for the wild torquey rat rod?!!??!?

[@Tinman2Kustoms]

Not sure. Parts were near 80k. Diesel performance is expensive and I have a ton of add-ons. 4500 hours of labor- that's where shop rate would have killed someone that wasn't building themselves. Realistically it's a 250,000$ build.

[@Docandballtorture7756]

@@Tinman2Kustoms how do people make rat rods qith only a 3,000 budget all the time

[@Tinman2Kustoms]

@@Docandballtorture7756 saving up free or dirt cheap parts for years. Or taking a late model car and just doing a frame/body swap. Nothing I build is that basic.

[@Docandballtorture7756]

What is a frame/body swap

[@Tinman2Kustoms]

@@Docandballtorture7756 take a cheap 1990 Silverado or S10 and throw an old body on it or something.

[@1-Six-dee]

R u going to strengthen the notches

[@Tinman2Kustoms]

The small notches that are towards the rear of the frame rails? No I'm not. The IRS subframe bolts in and stiffens up the chassis far more than would ever be necessary. I could have theoretically cut out that entire section of the frame rail and it wouldn't have mattered because the subframe on the IRS is in an X shape and holds everything in place.

[@1-Six-dee]

@@Tinman2Kustoms I gotcha man look forward to this build

[@felipeansell]

Wheres the videos maaaannnnn?????

[@Tinman2Kustoms]

Behind. Focusing on finishing the car first.