Its cold out, lets put my Stihl 044 arctic back into the fleet!!

  Рет қаралды 20,691

Tinman's saws

Tinman's saws

Күн бұрын

Пікірлер: 132
@Saw_Squatch
@Saw_Squatch 3 жыл бұрын
044 was my first real chainsaw, I got it for free from a logger friend of mine with a box of spare parts. It was totally blown up from a bad big bore kit and replacing that top end was what sent me down the rabbit hole of saws
@GreatLakesLogger
@GreatLakesLogger 3 жыл бұрын
Always enjoy the stills, especially the 44's and 440's
@NapoleonBonaparde
@NapoleonBonaparde 10 ай бұрын
I got a 039 from 1993 still working like a charm.
@thebradleysoncatbirdhill6849
@thebradleysoncatbirdhill6849 3 жыл бұрын
I share your sentiments regarding the 044. I have a 10 mm version that is in mint condition. Was cutting with it a few weeks ago, and it is just so smooth. It gives you the sense that you'd never really need any other saw than that! Thanks for sharing your great work as always!
@Boost_Addict
@Boost_Addict 3 жыл бұрын
The o and I are actually numbers 0 and 1 . Binary , 0 is OFF and 1 is ON. You teach me a ton , glad to return the favor :D
@tinmanssaws
@tinmanssaws 3 жыл бұрын
Thanks I always forget
@peterjohnstone32
@peterjohnstone32 3 жыл бұрын
Great video,I have a mid 80's 038 magnum that probably should have a deep clean.You have motivated me to clean her up when i get up to my cabin at the end of winter.
@gregoryparsons1076
@gregoryparsons1076 2 жыл бұрын
Just seen this video. So i dug, then I ended up watching all of your 044 videos.. I have a original, fully stock, 1989 Stihl 044. 10mm wrist pin, slanted fin. My friend, I love this saw. I use it to chuck up my lengths of spruce for the winter. I paid $450 last year. I really wish you can see this saw. It runs like a top, got a 24in bar, full house chain both Stihl. I trim the rakers and she, loves the wood…! My friend, I shall part with the wife before this saw. Love yor videos buddy. Greeting from Newfoundland. Stay warm!
@jakewiddicombe8044
@jakewiddicombe8044 3 жыл бұрын
Nice looking saw & sounds lovely too. Great video. Thx
@jeremybartlett1706
@jeremybartlett1706 3 жыл бұрын
Thanks for the video, great job, lovely saw, love my 046 too, 038...051...
@G-PA-2795
@G-PA-2795 3 жыл бұрын
I don't own an 044 but it's on the list. Listening to Harvey talk about how great they are did it, so it's Harvey's fault I have another saw on the " want list". Thanks Tinman
@tonicasaesmeralda8612
@tonicasaesmeralda8612 3 жыл бұрын
My Holzforma G444 was delivered to me by FedEx with a broken handle. Just this month decided to install the new handle. When everything was in that litttle cam on the far left cracked and broke. :( Now waiting on Holzforma to send me whole new cam spring kit. :) Just a coincidence that you posted this so much help. :) Thank you. :) The G444 is a twin copy of the 044 and yes I also pull 25 inch full comp on it....always cut nose first and she will pull. :) Exactly will kickback if not careful and just replaced the starter rope also.
@steveking4966
@steveking4966 3 жыл бұрын
you'll like this, i have been struggling with the first stihl i bought brand new a l"il 026 so i put a new impulse line on it carb rebuild kit ordered the crankseals, started it after the carb kit and a good blow out still wouldn't run any sense, then remembered i had put a new air cleaner on it, because the inbuilt choke butterfly wasn't sealing, so ran it with the covers off and blow me if the choke wasn't coming off it was sticking! So filed a bit in the aircleaner started it and its raging again, not bad for 21year old saw! lesson for me on not always trusting stihl parts!
@jakewiddicombe8044
@jakewiddicombe8044 3 жыл бұрын
I have a collection of 026’s coming on here. Starting to get to know them a little & love them. They are my favourite stihl saw so far. I’d like to get a nice 028av some day if I get the chance, but am pre occupied with the 026’s for now.
@toddmcneil5653
@toddmcneil5653 3 жыл бұрын
Great video Tinman! Got a couple of Huskies and Stihls but when I'm running my 97 044 you can see my boot lace bows!!!
@daphlavor
@daphlavor 3 жыл бұрын
She rips! Sounds good Tinman I’m going to port my mufflers to let them breathe. Husq 353, and Poulan counter vibe. Thanks
@LumberjackSmokestack
@LumberjackSmokestack 3 жыл бұрын
Great as always Tinman! Hanging out in the shed working on my newest acquisition (Homelite XL 12) And making some video while I watch yours. Haha! Thanks for always being helpful, positive and entertaining. Keep em coming!
@mikedionne8187
@mikedionne8187 3 жыл бұрын
Just got a 10mm 044 last week. Wow, what a saw. It has a couple mods and just absolutely rips. I had a 461 new and gotta say I don't think a 044 is much behind....probably just as fast in wood 20" or less.
@lyndonwortley6329
@lyndonwortley6329 3 жыл бұрын
Sometimes the parts book really is your friend when you go to put something together out of a box of bits you were given or bought... the exploded diagrams are really helpful. Also works as a wee reminder if you can't quite remember what something looked like before you dismantled it!! Of course, KZbin often does the same job and you can find really helpful videos, some of them made by a chap that goes by the name of "Tinman". I'd also recommend videos by "Afleetcommand".
@Indeewoods
@Indeewoods 2 жыл бұрын
Just working on my buddies 044 Arctic model like yours. Cool saws for sure. This one might have been on the “no maintenance plan” lol
@deeman5076
@deeman5076 3 жыл бұрын
I picked up a 034 super from a recycling yard. Needed carb cleaning and a ignition coil, fuel lines. Looked further the exhaust side of the piston is scored. It still has a ton of compression
@stevetheriault4164
@stevetheriault4164 3 жыл бұрын
Very nice clean saw ,there like a swiss pocket watch ,love 044 very reliable be safe timnman
@timbarden4578
@timbarden4578 3 жыл бұрын
Definitely a nice cold weather saw.love heated handles my hands are getting old.cold hurts.lol.
@greggschultz5768
@greggschultz5768 3 жыл бұрын
My 044 is my number 1. Thanks Tinman!!!
@philliplucion4262
@philliplucion4262 3 жыл бұрын
Something to keep them big paws warm I hear you bro nice
@bucketofguts
@bucketofguts 3 жыл бұрын
'End of the world...Got to get wood cut saw" only Tinman ..................... Great video, Thank you!
@57bslester
@57bslester 3 жыл бұрын
Love those power saws! I have an 046 and love it. I've been looking for an 044 for a while.
@tfade1
@tfade1 3 жыл бұрын
Thats a dang good looking 044, wish mine was that clean lol
@metalmtn
@metalmtn 3 жыл бұрын
044 is my fav saw! Cool vid!👍🏽 My 066 is in need of some repair, this vid just motivated me to get after it!
@seather863
@seather863 3 жыл бұрын
Sweet Artic! Would love to find one.
@blainstenberg2806
@blainstenberg2806 3 жыл бұрын
Grease needle bearing every time it’s apart and I rotate my sprocket. One time I pulled it apart and the needle cage was blue just starting to turn blue but having a look to grease saved it
@larryreno8293
@larryreno8293 3 жыл бұрын
That’s impressive, not started in months and it fires easily and doesn’t roll coal.
@tinmanssaws
@tinmanssaws 3 жыл бұрын
Yeah shes a good saw. That opti2 oil I use doesnt smoke much.
@antitactical
@antitactical 3 жыл бұрын
044 is the most loved saw in my area. They bring top $$$$. Only local loggers I know that dont care for them are really really hard on stuff. They are 395xp fans but I think they can break anvils with a bag of marshmallows.
@ScrewdriverTUNING
@ScrewdriverTUNING 3 жыл бұрын
She sounds nice..!! Arctic model ehhh. ..!!! Great work 💪🏻🪓⚡️ Kindness and love
@MrBkshorty
@MrBkshorty 3 жыл бұрын
Nice saw I used to have an 044 but I gave it to a friend of mine wish I would’ve kept it
@justinweaver8787
@justinweaver8787 3 жыл бұрын
The 0 series saws are great saws hope you have a good weekend buddy. Stay safe and warm.
@craighendrickson5012
@craighendrickson5012 3 жыл бұрын
I have 3 056 Stihl saws, a super, magnum, and magnum 2. 2 are down due to the ignition failing. The other runs great. Heavy as hell though.
@Lifeinthe906
@Lifeinthe906 3 жыл бұрын
I often think about having a heated bar and grip. Mostly when my hands are frozen to the saw!
@art1muz13
@art1muz13 3 жыл бұрын
That’s impressive, Only local loggers I know that don't care for them are really really hard on stuff
@timhart2652
@timhart2652 3 жыл бұрын
Man I love listen to the air being forced up through the transfers on those like it has a little turbo on them actually like are 461 and my 661 they definitely have that air flow noise nice saw brother..
@dannyduncan7407
@dannyduncan7407 8 ай бұрын
good work i like your 044 saw i have one has been a good saw just a little hard to crank
@tinmanssaws
@tinmanssaws 8 ай бұрын
Yeah that need a good hatd pull for sure.
@jim169
@jim169 3 жыл бұрын
I use a 041 and 056 mag. I'd love to let you look them over. 😁
@jrhensels711
@jrhensels711 3 жыл бұрын
Very nice brother
@gregorydobson4307
@gregorydobson4307 3 жыл бұрын
Nice video tinman, got a 044 and an ms441, great saws great to work on also. Keep up the good work 👍
@simpleman4224
@simpleman4224 3 жыл бұрын
That’s a fine saw! Glad to hear the farmertec tank is a good fit, gotta get one for my 038, need some parts for my 440 too! Thanks for sharing buddy! Always love FNS! 👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏
@WildAcresFarms
@WildAcresFarms 3 жыл бұрын
I have a farmertec on my ported 044. I had to steal the red lever off my factory handle because you’d break your thumb trying to drive it down to engage the choke. And the tank vent leaks fuel anytime the saw is not upright. EBay vendor gave me a full refund and told me to keep the handle so I’m hardly upset.
@WildAcresFarms
@WildAcresFarms 3 жыл бұрын
Farmertec REAR HANDLE / fuel tank. Oops!
@tomsawyer247
@tomsawyer247 3 жыл бұрын
I have looked but have not found a video on putting an arctic kit on a saw.
@ozdatman
@ozdatman 3 жыл бұрын
I only have 1 Stihl. an 08s. If I were to get another it would be an 044 or 038. My mate has a 461 which is a great saw, but I was surprised at the weight of it for its size. Oh to have al the saws we want. Just bought another P28 yesterday for 17 bucks. Hehe. Keep the videos coming man.
@raystomberski4480
@raystomberski4480 11 ай бұрын
Can one put a artic handle , switch,and what else is needed to make one a heated handle saw , thanks for your videos, I enjoy watching and sll the info, thanks again
@tinmanssaws
@tinmanssaws 11 ай бұрын
Heated handle, heater for the gastank handle, heating element for the carb, wiring, the switch and a generator.
@rogervandergriff1851
@rogervandergriff1851 3 жыл бұрын
I like that saw
@LeifDjurfeldt
@LeifDjurfeldt 3 жыл бұрын
My equivalent would be a nice 038 av magnum, with the alloy tank that I have. Same issue with the start mechanism, I "throw start" the saw to avoid problems. But man it´s a nice saw!!! Timing feels a little advanced on the magnums even in stock format, maybe that's why it´s a bit hard to pull on them. Thanks for all the good videos!!! By the way, would be nice to see you work on one of these, the early 038 mag
@tinmanssaws
@tinmanssaws 3 жыл бұрын
Theres an 038 mag on the shelf behind me. Needs attention, I'll run through it one of these days.
@LeifDjurfeldt
@LeifDjurfeldt 3 жыл бұрын
@@tinmanssaws that would be nice!! Going to cross my fingers it comes on the bench soon 💪
@joshdurrant9247
@joshdurrant9247 3 жыл бұрын
Great video Tinman! That's an awesome saw you have there, that series of Stihl is by far my favorite I've never had any major complications with mine. Keep up the great work 👍👍💪💪😁😎!
@tylerheard1279
@tylerheard1279 3 жыл бұрын
That's a preload washer. I'd put it back in there. 2 cents
@brotherlove100
@brotherlove100 3 жыл бұрын
yup, wave washer, also has a proper name but I can't recall it right now
@timgordon6160
@timgordon6160 3 жыл бұрын
Perfect choice of saw for a FNS episode!! It is one of my favourite saws to run as well!! Take care Tinman, cya on the next one!
@StevenLettsPerformance
@StevenLettsPerformance 3 жыл бұрын
Love the saw brother I wouldnt mine one of those lol
@SonOfLiberty1984
@SonOfLiberty1984 3 жыл бұрын
I have had some good luck with the farmertech non critical part fitment. However, do not purchase their 272 tank which they claim will fit a 266. The part of the tank closest to the bar was too narrow to fit my 1984 266SE correctly.
@MinusTheSparkPlugs
@MinusTheSparkPlugs 3 жыл бұрын
Idk if the rope spools on some of those stihls are smaller giving a guy less torque advantage or if they just have that much compression cause I got a MS290 that pulls over harder than my XL925 Homelite with a mint condition cylinder and piston/rings
@djmasterson8508
@djmasterson8508 2 жыл бұрын
I love O44 and 066
@mrxlh
@mrxlh 3 жыл бұрын
Cool video, was wondering when you were going to pull an orange and white one out for the Stihl fans. Been reading a ton of different theories on porting and find it very interesting that your 044 runs so well with just a base gasket delete. Thanks for sharing!!!
@tonyalto1014
@tonyalto1014 3 жыл бұрын
Don't forget the cross pin that goes through the band in front of the keeper screw.
@aldredske6197
@aldredske6197 3 жыл бұрын
Hi Tinman!!😀😀 Yes we definitely could get the arctic model down here in the states. Back in the day when I ran 44' s they were just a saw. If I knew then what I knew now I would have keep a dozen of them. I always really loved my O44 . They are really good saws. But then the O46 came out and I started running them. Then the 460 came out and now I'm still running them. I'm close enough to the end of my cutting career I'm sure they will last me as long as I need them to. Take care my friend!!😀😀 Logger Al
@tinmanssaws
@tinmanssaws 3 жыл бұрын
Its funny how once common things become "collectable". I'm kinda partial to my 461 these days. Same weight as the 044 and 7 more ccs.
@vincentconsiglio106
@vincentconsiglio106 Ай бұрын
Hey Tubman. I have a 044. I was wondering about the “ winter mode “. I have a half moon shaped hole in the shroud that faces the cylinder. I’ve been reading that there’s supposed to be a little slide or something in there. Am I missing a part for this? Thanks!
@TheWoodsman661
@TheWoodsman661 3 жыл бұрын
I've been wanting to get an 044. Got an 028 and 661. I've also got a 391 that I want to sell.
@Finom1
@Finom1 3 жыл бұрын
What mm is the pull rope on your Stihl saw? Another grate educational video!!!
@tomsawyer247
@tomsawyer247 3 жыл бұрын
I have a 441 arctic part saw am wondering if the arctic parts fit the 044
@fabzacres-blackcat
@fabzacres-blackcat 3 жыл бұрын
My kingdom for an 044 with original Mahle cylinder !!!
@bucketheadrox
@bucketheadrox 3 жыл бұрын
I always have to knock my e clips in. They snap in with a tap in.
@reillystsb
@reillystsb 3 жыл бұрын
That is a killer saw......
@tinmanssaws
@tinmanssaws 3 жыл бұрын
Thanks buddy!!
@kevinbarker2523
@kevinbarker2523 3 жыл бұрын
Tinman I have a Stihl 462 and the muffler is hollow as Ive cut the baffle out and opened up the stock outlet. It has twin 1/2 inch exhaust tubes in the front muffler cover facing forward and am getting sawdust fines inside of the muffler sticking to the oil. I am worried about dust/dirt getting into the combustion chamber wearing the rings faster. Do two strokes suck dirt that is in the muffler back in the combustion chamber? Wanted to get your take thoughts on it. Thanks and I enjoy your cutting videos.
@tinmanssaws
@tinmanssaws 3 жыл бұрын
Yes they can and will pull sawdust into the muffler. Watch my video called "lets talk about muffler mods" it may be of interest to you.
@CATmanATL22
@CATmanATL22 3 жыл бұрын
Tinman what’s a good aftermarket muffler for a 038 I was looking to change mine out .....
@lyndonwortley6329
@lyndonwortley6329 3 жыл бұрын
Have a look at the FarmerTec mufflers - they are dual port and not hard to open up a little more under the spark screen. Stihl dual port mufflers are no longer available :(
@colehey857
@colehey857 3 жыл бұрын
What is the part number for the things over the recoil
@Thetreefella
@Thetreefella 3 жыл бұрын
🧡🖤🧡🖤🧡🖤 stihl 🖤🧡🖤🧡🖤🧡🖤🧡
@JeepLJ
@JeepLJ 2 жыл бұрын
Can you buy all the parts to convert a 440 into an Arctic version?
@kurtsimmons1587
@kurtsimmons1587 3 жыл бұрын
Tinman I know more about cars than saws. But when they work the exhaust. They place the gasket on the heads. They dykem the heads and open the exhaust to the gaskets. Have you ever tried doing that on a saw. I know Ironhorse works the muffler itself. I’ve never seen anyone work the exhaust opening. Just curious 🧐
@georgeprice6252
@georgeprice6252 3 жыл бұрын
My 044 Stihl kicks back hard when I pull the cord, And idea what my problem might be
@mikahakkinen5651
@mikahakkinen5651 3 жыл бұрын
if it kicks back sometimes maybe the timing its little bit too early.just a thougt.is it possible
@diplo-matiko
@diplo-matiko 3 жыл бұрын
Wow like😀👍❤
@donjohnson5625
@donjohnson5625 3 жыл бұрын
12mm , 10mm? I just got a old 044. I love it. But how do I know what I got, 10-12 what?
@tinmanssaws
@tinmanssaws 3 жыл бұрын
That one is a 12mm. You can tell a 10mm from a 12mm by the front of the case. There are some differences in the cases.
@brentthebuilder6746
@brentthebuilder6746 2 жыл бұрын
Tin man who’s aftermarket muffler do you recommend for the 044?
@tinmanssaws
@tinmanssaws 2 жыл бұрын
Hyway
@SuperWheezer
@SuperWheezer 3 жыл бұрын
Hey Tinman, love your videos! What is the purpose of rotating the saw while its running? What does it tell you about the saw?
@fabzacres-blackcat
@fabzacres-blackcat 3 жыл бұрын
Carb
@tinmanssaws
@tinmanssaws 3 жыл бұрын
Checking for airleaks.
@larrywarner9314
@larrywarner9314 3 жыл бұрын
Only two stihl saws that in my opinion are the best are 044 ,046
@giannistsoukatos4205
@giannistsoukatos4205 3 жыл бұрын
Back in the 80's and 90's they considered the 036 the 044 and the 066 as the best. Back then they were made to last in comparison to today's Stihl. They are like Mercedes. The older ones were built to last 1 million kilometers while the ones after 2000 are sacrificing quality for performance.The 0 series would last 30 years + today's Stihls? I don't think they will make it to 15 years.Stihl' s best models were always not the prime numbered ones. Always the models ending in 2,4,6,8 were the best.Even the quality of the plastic on everything was superior than today's models.
@jasonwhittemore3083
@jasonwhittemore3083 3 жыл бұрын
TINMAN!
@mattcadamore5838
@mattcadamore5838 3 жыл бұрын
Hey Tinman, I’m trying to fix up my dad’s favorite old saw, a Jonsered Super 920. It needs a new chain brake, has the mechanism and spring and all, just missing the band. Any clue what band would fit? Or if I could make my own? Hard finding Jonsered parts nowadays. Love your videos!
@tinmanssaws
@tinmanssaws 3 жыл бұрын
I've never had the chance to work on one of those so I'm not much help sorry.
@mattcadamore5838
@mattcadamore5838 3 жыл бұрын
@@tinmanssaws That’s ok thanks for responding!
@kaynecustoza3365
@kaynecustoza3365 3 жыл бұрын
Oh ya tin man
@magicthewoodchopper4209
@magicthewoodchopper4209 3 жыл бұрын
To be honest I'm like u TinMan i alway's know where my tip is on any of the saws I've ran. I just much prefer saws without the chain break on it to be honest i just found it got to become a pain the butt.
@jeffreyfullwood6417
@jeffreyfullwood6417 7 ай бұрын
How is 044 artic different
@jeffreyfullwood6417
@jeffreyfullwood6417 7 ай бұрын
Is the clutch different ?
@tinmanssaws
@tinmanssaws 7 ай бұрын
Heated handles and carb
@jeffreyfullwood6417
@jeffreyfullwood6417 7 ай бұрын
Thank you
@ruggedtimberfirewood1408
@ruggedtimberfirewood1408 3 жыл бұрын
Murphy’s law! When filming, weirdest things happen, so true. Same things happen to myself when I am giving a demonstration to my students , if anything can go wrong it will. Great video as pet usual.
@Tj-zz6gh
@Tj-zz6gh 3 жыл бұрын
TINMAN!! Don't know how I hadn't seen your channel until a few days ago but boy oh boy did you bring my old chainsaw lover back out of me!! Great content, can really see the love of what you do! Quick-ish question- what are you running for oils and mixes in all your saws? How about these new Stihls and Huskys in particular? Thanks in advance!
@tinmanssaws
@tinmanssaws 3 жыл бұрын
I'm running opti2
@Tj-zz6gh
@Tj-zz6gh 3 жыл бұрын
I'm sure you've been asked and answered a thousand times by now! My apologies lol 😆 after watching through enough of your videos I got my answers to my questions anyway! Ha!
@pm270100
@pm270100 3 жыл бұрын
well the band was easy to fit
@MegaRiffraff
@MegaRiffraff Жыл бұрын
👍🏻😂
@timhart2652
@timhart2652 3 жыл бұрын
Hey mister I trade you my 461 sitting on your shelf for that you can send it to Michigan anytime ..course you got Port Port it for me though..lol.. love your videos man I love the way you explain everything all of your videos and when are we going to go live again come on quit teasing me have a good night brother
@andrewmantle7627
@andrewmantle7627 3 жыл бұрын
A trailer queen? Please elaborate. Or not.
@joshuap7501
@joshuap7501 3 жыл бұрын
Wind it with paracord
@chuck805
@chuck805 3 жыл бұрын
Where's everybody at?
@jeffreyrubish347
@jeffreyrubish347 3 жыл бұрын
Present!
@tinmanssaws
@tinmanssaws 3 жыл бұрын
Im here
@larryreno8293
@larryreno8293 3 жыл бұрын
Somewhere cold
@larryreno8293
@larryreno8293 3 жыл бұрын
@@tinmanssaws no, you’re there. I’m here.
@brendosghanasenditsaws
@brendosghanasenditsaws 3 жыл бұрын
Get a genuine fuel cap them FT ones are rubbish man
@bigdadtrav
@bigdadtrav 3 жыл бұрын
jesus turn that idle down
@jamesarcher3065
@jamesarcher3065 3 жыл бұрын
Owned one... it sucked ! What can I say it is a Stihl .
@toddmcneil5653
@toddmcneil5653 3 жыл бұрын
It sucked?? I'll bet that hurt!
@jamiedalluge9472
@jamiedalluge9472 3 жыл бұрын
Go husqvarna!!
@jamesarcher3065
@jamesarcher3065 3 жыл бұрын
@@toddmcneil5653 I own a 281 Xp , a 266 Xp , a 266 W , a 266 SE , a 262 XP ! and a 55 Husky why would I waste my time on a Stihl .You are smarter than most people Todd.
@jamesarcher3065
@jamesarcher3065 3 жыл бұрын
@@toddmcneil5653 I stated my Husqvarna 262 Xp today , all brand new rebuilt . The thing is insane ! the power and the speed of it. screw Stihl. right on Todd you got it right !
@toddmcneil5653
@toddmcneil5653 3 жыл бұрын
@@jamesarcher3065 You've got some bad ass saws James people will never be able to even see a saw like that in action let alone own one . It's the most satisfying feeling on earth to feel that kinda power!! Screw the head shrink, buy a saw!
Stihl 044 and ported 461 drop a willow tree.
21:16
Tinman's saws
Рет қаралды 20 М.
VICTORY!! MY STIHL 044 IS FIXED!!
27:00
Tinman's saws
Рет қаралды 10 М.
UFC 310 : Рахмонов VS Мачадо Гэрри
05:00
Setanta Sports UFC
Рет қаралды 1,2 МЛН
Леон киллер и Оля Полякова 😹
00:42
Канал Смеха
Рет қаралды 4,3 МЛН
Accompanying my daughter to practice dance is so annoying #funny #cute#comedy
00:17
Funny daughter's daily life
Рет қаралды 29 МЛН
INSANE MUDDY LOGGING
22:00
Backwoods TN
Рет қаралды 2,9 М.
STIHL CHAINSAW's Dirty Little Secret EXPOSED
18:54
Wranglerstar
Рет қаралды 1 МЛН
Stihl ms461 failure analysis
14:54
Tinman's saws
Рет қаралды 45 М.
How a piston ported chainsaw works.
22:46
Tinman's saws
Рет қаралды 28 М.
Lets talk about chainsaw muffler mods.
17:12
Tinman's saws
Рет қаралды 163 М.
Middle Weight Taste Test -  Stihl 044 vs 462 vs 461 vs Nuker 461
18:10
still 044 and o46! what's the difference? stories and sawtalk!
29:55