No video

Tinny mods | The ultimate fishing platform is the new Stessco Tripper.

  Рет қаралды 63,890

Wild Reaches

Wild Reaches

Күн бұрын

The long awaited new tinny build is here. It’s a Stessco Tripper HS so the sides are higher and the gunnels are wider. Once it’s fit out with these mods, in my opinion it’s the ultimate fishing platform.
What do you need:
2 sheets of marine grade ply
10 m2 of marine carpet
3m of piano stainless steel hinge
Approx 6l of contact adhesive
4 compression locks
Pop Rivets approx 3.2mm x 9mm / 1 pack
Marine Sika Flex
Sika Flex 221
Pan head, metal screws 30mm / 50
Small countersunk screws for the piano hinges
Black spray paint for timber
Aluminium angle / approx 5 3m lengths
30mm x 30mm Box section aluminium / 1.2m
16 x 16mm aluminium channel / 2.4m
Foam 10mm x 6mm self adhesive sealant strip from Bunnings.
And I think that’s about it.
I hope this is helpful guys, get out there and enjoy it!

Пікірлер: 163
@WildReaches
@WildReaches 2 жыл бұрын
Forgot to add that the foam flooring was boat flooring from Emega Online. On EBay.
@brendansmith8420
@brendansmith8420 2 жыл бұрын
Hey mate cracking build. Should mount a solar panel under the lid of the gull wing door. Leave it open when driving. Or docked
@NVSawsomeness
@NVSawsomeness 2 жыл бұрын
A mate of mine has a big strip of black poly garden edge riveted around the front deck because he was tired of licking pliers and lipgrips over the front. It also catches a lot of wind and water whipping up over the front of the boat that you would otherwise catch in the face. Also costs next to nothing. Couple rivets, some silicone and the garden edging is all you need each time you need to replace it and he seems to get about 2 years out of it.
@jordanalexander5202
@jordanalexander5202 Жыл бұрын
Hey mate how has the sea deck on the gunnels held up?
@WildReaches
@WildReaches Жыл бұрын
@@jordanalexander5202 amazing mate. Hasn’t peeled at all. 👌🏼
@sonndrewebber1093
@sonndrewebber1093 9 күн бұрын
Hey mate, cracker build. I'm looking to buy the same roll of foam. Do you have a link by any chance? I can't find them for the life of me. They might have disappeared since
@odes20
@odes20 2 жыл бұрын
Great to watch. One thing i have done differently is close up that gap between the floor and the rear seat. That gap for us always had stuff falling under the seat. We added a little panel down to the floor on the front side of the seat, allowing a small gap so water can easily flow thru, from the floor, but not knives, sinkers etc.
@WildReaches
@WildReaches 2 жыл бұрын
Yeah iv thought about that. I think I agree that should’ve been closed.
@tonypaine4958
@tonypaine4958 Жыл бұрын
As a small boat owner, I appserlutly jealous of your work. Just awesome 👌 mate
@craiglieberman5048
@craiglieberman5048 2 жыл бұрын
Congrats guys! It's been incredible how far your channel has come (and how quick)since the first episodes! So looking forward to season 6!
@WildReaches
@WildReaches 2 жыл бұрын
Thanks Craig. That’s inspiring mate
@craigdargie6929
@craigdargie6929 2 жыл бұрын
Jeez Nath, you've been bloody busy. The boat seems perfect. So much storage and room to move. And the trailer is tough as nails. You shouldn't have any problems in the future with this set-up. Have a great trip.
@WildReaches
@WildReaches 2 жыл бұрын
I hope not Craig, about to put it thru it’s paces 🤙🏼
@hewsmithers7830
@hewsmithers7830 2 жыл бұрын
You're a brilliant carpenter...and silka flex😂... man i sealed up my very old landrover with it.. crossed many flooded rivers upto window,s
@rickheaton3003
@rickheaton3003 2 жыл бұрын
Looks great mate.. Love your attention to detail.. makes a massive difference if you take pride in your work.. if only more people had a work ethic like yours.. Looking forward to Season 6. Stay safe.
@WildReaches
@WildReaches 2 жыл бұрын
Thanks mate 🙏🏼, I agree the little things and the detail make all the difference
@marshallfarr5575
@marshallfarr5575 2 жыл бұрын
Been waiting for this one Nath! Awesome build, love the wide gunwales and storage space. Can't wait to see how she handles herself in Cape York! All the best and looking forward to the next one! Cheers
@WildReaches
@WildReaches 2 жыл бұрын
Me too Marshall. I’m about to put it all to the test!
@Onemoreventure
@Onemoreventure 5 ай бұрын
Weapon tinny, can’t wait to build mine to take around aus with me! Definitely helped with some ideas
@atmm89
@atmm89 2 жыл бұрын
you have got my attention the whole build, well done, you have put a seed of an idea, thank you
@WildReaches
@WildReaches 2 жыл бұрын
That’s good to hear 🤙🏼
@kodiesinclair4276
@kodiesinclair4276 2 жыл бұрын
Legit best content by far…. Can’t wait to see where you take the tin box👍🏻
@WildReaches
@WildReaches 2 жыл бұрын
Haha that’s awesome Kodie
@yourenotwrong3511
@yourenotwrong3511 2 жыл бұрын
Mate well done on the build. The quality of the finish is fantastic. Loving forward to the new season 🤙
@WildReaches
@WildReaches 2 жыл бұрын
Thanks mate. I’m kicking it off right now. In cairns and onto the Gulf tomorrow.
@mitchellwinter1952
@mitchellwinter1952 2 жыл бұрын
You boys deserve more than 1mil subs with the content you bring, Keep up the work lads and bring back both boys soon 👌.
@WildReaches
@WildReaches 2 жыл бұрын
Thanks Mitchell 🙏🏼
@Coxy1216
@Coxy1216 2 жыл бұрын
Great job on the build!! So keen to see what this season has coming. Ill have to keep my eyes peeled for you on my travels around cape york and the Kimberley.
@WildReaches
@WildReaches 2 жыл бұрын
Yeah mate, make sure you say gday if you see me. 👍🏼
@brentwall9786
@brentwall9786 2 жыл бұрын
Another gr8 episode mate, congrats on an amazing job on the punt. I'm really amazed why you haven't got triple the subs mate, your content is well worth watching and subscribing too. Great job Nath and co👍👍
@WildReaches
@WildReaches 2 жыл бұрын
Thanks Brent, it will get there mate. I’m patient. 👍🏼
@DavidBrookes
@DavidBrookes 2 жыл бұрын
Looks awesome Nath...that's a great functional build.
@WildReaches
@WildReaches 2 жыл бұрын
Thanks Dave
@Stevos_HookedonRods4844
@Stevos_HookedonRods4844 2 жыл бұрын
It's going to be a Good Friday with Wild Reaches. Boat Builds 🤙 Cheers Nath
@WildReaches
@WildReaches 2 жыл бұрын
Haha enjoy Stevo!
@MADDOGUNIT84
@MADDOGUNIT84 2 жыл бұрын
Awesome build mate! Some great ideas. Thanks for sharing. Just be careful with that landing net. I lost a mates barra the first time we used his identical net. 2 days old. It thrashed and ripped a hole and swam straight out. Heart breaking.
@WildReaches
@WildReaches 2 жыл бұрын
Shit that would suck!!
@MADDOGUNIT84
@MADDOGUNIT84 2 жыл бұрын
@@WildReaches yeah it did haha. was in a barra comp as well
@Macka.
@Macka. 2 жыл бұрын
Hey Nate great video ... and thanks Got my 'Palm Cockatoo" shirt other day and its awesome
@WildReaches
@WildReaches 2 жыл бұрын
You’re welcome Macka, thanks for buying one mate.
@ShaunGud
@ShaunGud 2 жыл бұрын
Nice build. Can’t wait for the adventure to begin!!
@WildReaches
@WildReaches 2 жыл бұрын
Me either, it’s just about to!
@OfficialMichaelCarothers
@OfficialMichaelCarothers 2 жыл бұрын
Got the notification - Just need a Tinny boat more time before I can watch 😂 pretty sure there’s an Easter egg for the next season in here too? Lol. Love wild reaches and sorry I’m reaching for bad puns here! Will be watching later tonight! Cheers
@WildReaches
@WildReaches 2 жыл бұрын
😂
@auozjan
@auozjan 2 жыл бұрын
Happy Easter boys to you & yours
@WildReaches
@WildReaches 2 жыл бұрын
Thanks Jan, happy Easter to you!
@Goggo_
@Goggo_ 2 жыл бұрын
Good looking set up mate can’t wait to see your gear at work. Cheers
@WildReaches
@WildReaches 2 жыл бұрын
I’m nearly out bush
@Goggo_
@Goggo_ 2 жыл бұрын
@@WildReaches Have a safe and happy Easter. 👍
@user-oj9sv4vx6o
@user-oj9sv4vx6o 2 жыл бұрын
My fave channel, can't wait for the next series. 2:09, they are hanging in your tshirt neck lol
@WildReaches
@WildReaches 2 жыл бұрын
🙏🏼 thanks legend. Nah they’re my sons glasses
@adamgladwin-yn1rf
@adamgladwin-yn1rf Жыл бұрын
Luv the build and the channel mate!!!! Looking at a southern waters tinny build based on your build. Very similar with a few subtle differences. Some great ideas!! Awesome!!! Keep up the good work!!!👍👍
@Fitzy6722
@Fitzy6722 2 жыл бұрын
wow mate you do some tidy work! Looking forward to season 6👌
@WildReaches
@WildReaches 2 жыл бұрын
Thanks Terry!
@jarroddavis3688
@jarroddavis3688 2 жыл бұрын
Can’t wait for the new episodes mate 👌🤘
@WildReaches
@WildReaches 2 жыл бұрын
I’ll be starting filming over the next couple of days. Looking forward to it!
@jarroddavis3688
@jarroddavis3688 2 жыл бұрын
@@WildReaches keen to see 👍
@jamesogden178
@jamesogden178 2 жыл бұрын
The ultimate big croc catching tinny !!!
@WildReaches
@WildReaches 2 жыл бұрын
😂
@CoastalChaosAdventures
@CoastalChaosAdventures 2 жыл бұрын
nice work mate i'm sure the next adventure in this little weapon will be EPIC!!
@blockhead52
@blockhead52 2 жыл бұрын
Amazing build looking forward to some action from the boat.
@dirtyhooker6317
@dirtyhooker6317 2 жыл бұрын
Thats just perfect youve thought of everything and nailed it best tinny build ive seen love to see a yammy but a 30 3cyl 2 stroke would be pretty great on it👍
@WildReaches
@WildReaches 2 жыл бұрын
I imagine that would haul ass!
@dirtyhooker6317
@dirtyhooker6317 2 жыл бұрын
@@WildReaches yeah just weld some support on it i doubt youd need it but itll hold it no worrys
@johnsykes706
@johnsykes706 2 жыл бұрын
Impressive fit out for using Bunnings and RTM fittings with no welds. Done alot of boats and this is mint. Next time though go to an aluminium supplier for your angle. Bunnings is ridiculously expensive for that stuff. Sorry, you just pointed that out. 👍
@WildReaches
@WildReaches 2 жыл бұрын
Thanks mate. I always want to do these things in a way that all viewers can do too. Yep Bunnings is far too expensive for angle hey, blew me away
@joshjohnson3005
@joshjohnson3005 2 жыл бұрын
Looks fantastic. Well done
@lachlanwilliams3234
@lachlanwilliams3234 2 жыл бұрын
Great build video, some great ideas. I did a similar build last year but used 5083 grade 3mm Al plate for the floor, then covered it in 5mm Ultralon Z-tread, Al angle/RHS for deck frame. No wood, no dirty/wet/mouldy carpet. I did the stats and it worked out to be a similar weight to ply and a much more durable option, and not a heap more expensive. Let me know if you want some details/pics for your next build. Also curious to know if your gutter system works to keeps the hatches dry? Keep the vids coming, you're living the dream!
@justinlooker5105
@justinlooker5105 2 жыл бұрын
When you come to the Kimberley u need to go out to cape domett it’s about 120kms north of Kununurra where I’m from but it has to be in the dry season, definitely won’t get out there in the wet
@WildReaches
@WildReaches 2 жыл бұрын
My sister and brother in law lived up there for a few years, their mate lost his car at Cape Dommet, sounds like a pretty wild but amazing spot. I’ll put it on the list mate
@justinlooker5105
@justinlooker5105 2 жыл бұрын
@@WildReaches yeh oath I love it up there and the fishing goes off this time of the year but anyway I’m keen as to see the next season an love watching ur vids mate, just makes me wanna go fishing more everytime I watch them aha but nah keep it up brother
@WDMTAdventures
@WDMTAdventures 2 жыл бұрын
What an absolute professional build Nath, I will be definitely copying your design when I get around to building my tinny. the only thing that I need to incorporate is a small side steering console as I have a very bad back and can't use a tiller steer outboard. I can't wait to see the next to episodes with the Quad bike and canopy review. Love your work mate.
@WildReaches
@WildReaches 2 жыл бұрын
Thankyou Roger, nice to know people are enjoying this stuff. Hope you’re well mate
@milesabove5259
@milesabove5259 2 жыл бұрын
Hey mate. You definitely need to seal the edges with sika, I’ve had issues where the parts I didn’t seal were shrinking and the glue separated from the foam. The edges that were sealed with sika have held tight. It was about 6 months to see the issues. The product is fine otherwise but needs the edge sealing.
@WildReaches
@WildReaches 2 жыл бұрын
Thanks mate. I thought it would
@bilzahart9122
@bilzahart9122 2 жыл бұрын
Love the build fellas, got me inspired to build my own !!
@rickstewart3755
@rickstewart3755 2 жыл бұрын
good ep mate, thinking of selling my brand new cc now after watching this and seeing if you can do a fitout on a tinny for me🤣🤣
@WildReaches
@WildReaches 2 жыл бұрын
Hahaha yours is epic too mate
@JillyBean70
@JillyBean70 2 жыл бұрын
even though this was not my thing.....watched it anyways.......BRING ON SEASONE 6........cant wait ♥
@WildReaches
@WildReaches 2 жыл бұрын
Haha thanks Jill
@Livelifecairns
@Livelifecairns 2 жыл бұрын
Nice set up Mate.
@WildReaches
@WildReaches 2 жыл бұрын
Thanks Luke.
@stevesallaussieadventures5648
@stevesallaussieadventures5648 2 жыл бұрын
Absolutely love this build 👌 I need a tinny like this haha
@WildReaches
@WildReaches 2 жыл бұрын
They’re such a good hull!
@elliotbarron4913
@elliotbarron4913 Жыл бұрын
Did you use stainless steel hindges and screws ect? Also did you use sealed rivets or just standard open with plenty of sikka? Ps ya got another subscriber 🤙
@juandreoliver1811
@juandreoliver1811 2 жыл бұрын
Awesome build!
@WildReaches
@WildReaches 2 жыл бұрын
🙏🏼 thankyou
@Stevos_HookedonRods4844
@Stevos_HookedonRods4844 2 жыл бұрын
An Architectural Master Piece if I my say so. Great build Nath Bring on the new season P.S. Do you need a Navi / Co-Pilot. Bugger, You'll be gone by the time I get there 😂
@WildReaches
@WildReaches 2 жыл бұрын
Haha thanks Stevo! I’d usually place a Patrol joke here but I don’t want to jinx my trip.
@Stevos_HookedonRods4844
@Stevos_HookedonRods4844 2 жыл бұрын
@@WildReaches Nothing wrong with the GU🤙
@tonyphillips7773
@tonyphillips7773 2 жыл бұрын
Super excited to see where the new tinnie gets you boys... Bring on Season 6
@WildReaches
@WildReaches 2 жыл бұрын
Not long is Tony, teaser dropped today
@chris7643
@chris7643 2 жыл бұрын
Nice job mate, neat and functional
@troydebruyn3661
@troydebruyn3661 2 жыл бұрын
Damn U did tidy job on your tinny fit out very cool bud
@WildReaches
@WildReaches 2 жыл бұрын
Thanks Troy 👍🏼
@AusAdventure
@AusAdventure 2 жыл бұрын
The tinny is sweet but that trailer is awesome.
@WildReaches
@WildReaches 2 жыл бұрын
It stole the show hey! Such an epic build
@Ride75
@Ride75 Жыл бұрын
Good job 👍
@newport5504
@newport5504 2 жыл бұрын
Awesome build love it! Can you buy the HS tripper yet? Had a look on the net but can’t find it, thinking about upgrading now haha
@WildReaches
@WildReaches 2 жыл бұрын
Yep, apparently every dealer can access them
@newport5504
@newport5504 2 жыл бұрын
@@WildReaches thanks for the reply I did find a couple thanks so much
@rosswilson5364
@rosswilson5364 2 жыл бұрын
Sorry mate. Fly rod? You do so well with Lures you know and produce great fish! Introducing a Fly just a conduit full of pain. You could add a big GT rod instead 👍
@WildReaches
@WildReaches 2 жыл бұрын
Haha I love my fly fishing! But yes there will be a spot for the big popper slinger when I’m heading out to the reef in a glass out
@michaelnelson912
@michaelnelson912 Жыл бұрын
Nice build - I went looking for pictures from my similar tinny build 15 years ago, but I seem to have lost them! (Have to build another one...) I wonder how those compression locks will hold up to salt water? They might last better sprayed with a coating every now and then (Lanox or similar). Love the channels - and I'd love to hear how effective they are at keeping the water out. That's always been the biggest challenge I've found with hatches made of plywood. Michael
@jonbrown6029
@jonbrown6029 Жыл бұрын
What was the thickness off the aluminium angle you used cob?
@samraciti1647
@samraciti1647 Жыл бұрын
Hey mate just wondering why your boat has welded gunnel’s and that the new ones don’t is that something you added to it?
@craigtomkinson2837
@craigtomkinson2837 2 жыл бұрын
Nice work
@WildReaches
@WildReaches 2 жыл бұрын
Thanks Craig
@craigtomkinson2837
@craigtomkinson2837 2 жыл бұрын
@@WildReaches You find someone to go with you, I be up there somewhere for two months soon I only live up the Road at Cooroy
@halen_outdoor
@halen_outdoor 2 жыл бұрын
Awesome build, looking at doing my own now. Just wondering how you get the rods in and out of the rod holders? I know it sounds dumb but i would like a demonstration to see if it would work with my tinny being slightly shorter.
@anthonywhite5353
@anthonywhite5353 2 жыл бұрын
Hey mate, not sure if I missed it on the video or not. How did you attach the upright bits of ply to the original seat. Cracking build BTW
@WildReaches
@WildReaches 2 жыл бұрын
Sika Flex and screws
@tonyloechte9994
@tonyloechte9994 2 жыл бұрын
I forgot my mako sunnies Not Love ya work.
@WildReaches
@WildReaches 2 жыл бұрын
They’re my sons glasses on my shirt.
@bradenaskin1237
@bradenaskin1237 Жыл бұрын
Without the wide gunnels, do you think you would need some sort of vertical support on the front deck? Looking to do somthing similar, just concerned that there might be too much flex without some sort of center vertical support - or is the middle horizontal support where you or the piano hinge strong enough?
@michaelbarling1197
@michaelbarling1197 2 жыл бұрын
Great build. Can I ask the standard 3.79 tripper has a max HP of 20. Can you request the size of gunnels and height be increased to increase the max HP to 25 like you have done?
@WildReaches
@WildReaches 2 жыл бұрын
I think that’s the idea. Every dealer can access the new Tripper with the high sides.
@PatientPursuits
@PatientPursuits 8 ай бұрын
What thickness angle did you use in the front as support for the cast deck please ?
@joeberry0290
@joeberry0290 2 жыл бұрын
Awesome content Nath as per normal! Mate what’s the total weight of the hull after the fit out?
@WildReaches
@WildReaches 2 жыл бұрын
I haven’t weighed it but I’d say around 150
@D.s182
@D.s182 Жыл бұрын
Hey Bruz, I’m looking at purchasing one of those exact boats to show my 4 year old the fishing camping world. Would you agree the tripper is nice and stable?? Cheers Dan
@WildReaches
@WildReaches Жыл бұрын
100 percent mate. Such a stable good little boat.
@lukealexander392
@lukealexander392 2 жыл бұрын
Great clip 🙂. Where can I get one of your Anchors from?
@WildReaches
@WildReaches 2 жыл бұрын
You have to make them.
@petestopher4864
@petestopher4864 2 жыл бұрын
Awesome vid, you mention it but never get back to it. How much did it cost?? Cheers
@desausfish4076
@desausfish4076 2 жыл бұрын
Great vid Thanks
@WildReaches
@WildReaches 2 жыл бұрын
You’re welcome!
@hewsmithers7830
@hewsmithers7830 2 жыл бұрын
Genius....aluminium🙂
@roypowell3450
@roypowell3450 2 жыл бұрын
Blimey Nath you could build one of these for Abramovich he has hit hard times !! We loved this very much, very interesting a lovely build mate. Did we hear you are going solo? Cor! if only you had our expertise from your training to fall back on 😚. Looking forward to your next adventure, we have got our lounge redecorated with a fire pit in the middle of the lounge!! Cheryl has purchased the girl's beginners guide to spiders and snakes her knowledge now is amazing, and the crocs are like pussy cats apparently😗. My back side still go like a buglers lip when I see one!! Love the quad and boat set up by the way looks very strong. Anyway looking forward to the next video...Take care your UK Leg Ends!!🍻🍻
@WildReaches
@WildReaches 2 жыл бұрын
Gday guys! Haha you should write a field guide to surviving the Australian Outback from a distance. I’d buy it! 😂 I hope you guys are well and getting ready for your trip down under. See you soon!
@roypowell3450
@roypowell3450 2 жыл бұрын
@@WildReaches Yes about the trip Octoberish! Now about the book.....😂
@brendanlyons3938
@brendanlyons3938 2 жыл бұрын
I may have missed it but what length is she ? Love your work!
@WildReaches
@WildReaches 2 жыл бұрын
3.79 mate 👌🏼
@ssmith7100
@ssmith7100 2 жыл бұрын
Just wondering where you got your compression locks from?
@WildReaches
@WildReaches 2 жыл бұрын
Bunnings mate
@ssmith7100
@ssmith7100 2 жыл бұрын
Thank you, are they plastic or metal? At Wagga I've only seen similar catches in metal.
@Hayydawwg
@Hayydawwg 2 жыл бұрын
Probably a fuckin stupid question, but i dont know all too much about boats. That front seat on the bare hull. Is that a structural support in any way? Like, could you cut a hole out on the top and get a aluminium box made up and place it inside?
@WildReaches
@WildReaches 2 жыл бұрын
Yeah its structural so no not really unless you had it engineered
@davidr9821
@davidr9821 2 жыл бұрын
Did you seal the marine ply before carpeting?
@WildReaches
@WildReaches 2 жыл бұрын
No I didn’t but never have in my boats and it seems to work fine. I think the glue acts as a seal.
@jedrhodes2513
@jedrhodes2513 2 жыл бұрын
Are you going to have a minn koda
@WildReaches
@WildReaches 2 жыл бұрын
Yeah I’d say so but not for this trip. Just the plonk.
@shanemontgomery5455
@shanemontgomery5455 2 жыл бұрын
Wheres Dan, bring back Dan
@WildReaches
@WildReaches 2 жыл бұрын
He’ll be back!
@atmm89
@atmm89 2 жыл бұрын
shit I just got a quote for the boat on trailer, wow 7 grand and I have to put a donk on it
@brentmcd12
@brentmcd12 2 жыл бұрын
THE TINNY BUILD
@brentmcd12
@brentmcd12 2 жыл бұрын
don't forget the saftey chain or strap from the engine to the boat. . also u might need a hydrofoil SE sports 200 .. might make it handle more stable also .
@brentmcd12
@brentmcd12 2 жыл бұрын
ATOMIC SLIM TWITCH ... the one that got away .. it was this big !! √=====|°>
@brentmcd12
@brentmcd12 2 жыл бұрын
so all this extra wood flooring decking... battery system etc .. how heavier is the boat now from it's 85kg ? ~110kg ?
@brentmcd12
@brentmcd12 2 жыл бұрын
I cant believe it's only a 379!! the gunnels make it look so much bigger also i think . and where all the rib welds are !
@brentmcd12
@brentmcd12 2 жыл бұрын
would you still get a Bimini canopy ? for sun protection / sails ? or do you think it would interfer with your casting deck area and height ?
@regina6709
@regina6709 2 жыл бұрын
i live in currimundi and i would love to go fishing with you
@cruzinoz8783
@cruzinoz8783 2 жыл бұрын
Ya mako sunnies are on ya shirt lol
@WildReaches
@WildReaches 2 жыл бұрын
Nah they’re my sons cheapies
@michaelhovey5982
@michaelhovey5982 2 ай бұрын
It doesn't look like there is any buoyancy in it lol
@russallchin5552
@russallchin5552 2 жыл бұрын
waffle
TINNY FITOUT | Tips and Tricks for the ULTIMATE FISHING TINNY
26:08
HOW I UPGRADED MY TINNY
21:06
Micksgonefishing
Рет қаралды 66 М.
The Giant sleep in the town 👹🛏️🏡
00:24
Construction Site
Рет қаралды 21 МЛН
Gli occhiali da sole non mi hanno coperto! 😎
00:13
Senza Limiti
Рет қаралды 22 МЛН
The CUTEST flower girl on YouTube (2019-2024)
00:10
Hungry FAM
Рет қаралды 4,8 МЛН
Restoration of a classic 1978 Quintrex Fish-Finder
28:49
The Captain
Рет қаралды 114 М.
I nearly sunk my Tinny! (don't make this mistake)
14:23
Saltfix Fishing
Рет қаралды 12 М.
testing the new tinny camping setup
28:55
CAMPING DOWNUNDER
Рет қаралды 13 М.
South West Tinny Camping  ||  PART ONE - Finding camp
26:44
Wild Touring
Рет қаралды 77 М.
CUSTOM TINNY BUILD ~ DIY with listed items to use
40:59
Trucks Tinnies & Trebles
Рет қаралды 22 М.
D.I.Y Custom Tinny Build COMPLETED! - Part 2 of 2!
17:27
Ignore The Rust
Рет қаралды 44 М.
Pt.1/Ultimate Fishing Tinny/Layout & Mods/Clark Side Console
13:50
NON-STOP Fishing
Рет қаралды 20 М.