How to 3D Print Anime Figures with Uniformation GKTwo | Solo Leveling

Timelapse of #3dprinting and painting Sung Jin-woo from #sololeveling
Uniformation GKTWO: bit.ly/4aI10Ae
80$ Save Code: tiny
Gktwo on Amazon US: amzn.to/3Uoq7D8
On sale, Save 80$ Now
Discover amazing STL models to 3D Print:
📫The Tiny3D Room Newsletter📫 (IT'S FREE)
www.tinylittle...
Get this Sung Jin-woo by Il_paddyy here:
www.cgtrader.c...
SUBSCRIBE: bit.ly/40gwto3
Patreon: / tinylittles3d
Free Discord Server: / discord
For Commissions, Get a QUOTE here:
www.tinylittle...
Fauxhammer GKTWO review: • Uniformation GKtwo - B...
Vogman GKTWO review: • UniFormation GKtwo 3D ...
How to Calibrate Resin: • PERFECT Exposure times...
How to Support 3D models: • 3D resin print support...
⭐My Gear (US) AFFILIATE LINKS
📷 Camera 📷
Camera Sony ZV-E10: amzn.to/3MQ1o7A
Lens Sigma 18-50mm F2.8: amzn.to/3PlQ4j1
🖨️3D Printer & Resin🖨️
Uniformation GKtwo : amzn.to/3Uoq7D8
Elegoo Saturn 2 3D Printer: amzn.to/3ZHIsKP
Elegoo Cure and Wash station: amzn.to/44XNV2G
Sunlu standard resin: amzn.to/47QIBB1
🎨Paints🎨
Vallejo Fairy Flesh Set: amzn.to/44jEaNu
Vallejo Starter Set: amzn.to/3nItZB8
Army Painter SpeedPaint: amzn.to/3MllAxI
Vallejo Express Colors: amzn.to/3rlS1ny
Citadel Contrast Paints: amzn.to/3LoAYrK
🔫Airbrush🔫
Iwata Eclipse Airbrush: amzn.to/40TZaZ3 (US)
Airbrush Compressor: amzn.to/3PE62Gy
Airbrush Cleaning pot: amzn.to/3EDV51A
3M Respirator (Mask) : amzn.to/3ZmYprb
Respirator Vapor Cartridge (For Painting): amzn.to/46j4ast
🔧Miscellaneous🔧
Nail Dust Collector: amzn.to/3W20aKZ
Paint Rack: amzn.to/3PF8L2G
Airbrush Cleaner: amzn.to/48ibRAQ
Thinner: amzn.to/45UaLtk
Flow Improver: amzn.to/3PIiJjV
Surface Primer: amzn.to/3RqrfFs
Matt Varnish: amzn.to/3sY8WNC
3M Particulate Filter (For Sanding): amzn.to/3TKB6a9
🍁My Gear (CA) AFFILIATE LINKS
📷 Camera 📷
Camera Sony ZV-E10: amzn.to/3xU1CVA
Lens Sigma 18-50mm F2.8: amzn.to/4dz0HKT
🖨️3D Printer & Resin🖨️
Uniformation GKtwo : amzn.to/4aUOfTR
Elegoo Saturn 3 Ultra 3D Printer: amzn.to/4dmflVn
Elegoo Cure and Wash station: amzn.to/3xU2ae6
Sunlu standard resin: amzn.to/4doLDzl
🎨Paints🎨
Vallejo Flesh Set: amzn.to/4a2QfIv
Vallejo Starter Set: amzn.to/44k5HPb
Army Painter SpeedPaint 2.0: amzn.to/3UknoJW
Citadel Contrast Paints: amzn.to/4dknE42
🔫Airbrush🔫
Iwata Eclipse Airbrush: amzn.to/3wi9hgc
Airbrush Compressor: amzn.to/3JDjnv8
Airbrush Cleaning pot: amzn.to/3JJkf1o
3M Respirator (Mask) : amzn.to/3wejXfK
Respirator Vapor Cartridge (For Painting): amzn.to/3UpS8sX
🔧Miscellaneous🔧
Nail Dust Collector: amzn.to/3UESi0I
Paint Rack: amzn.to/3Wg2xdg
Airbrush Cleaner: amzn.to/3UGZBVY
Airbrush Thinner: amzn.to/3WqyvU7
Flow Improver: amzn.to/3UDt3Mu
Surface Primer: amzn.to/3WqyI9R
Matt Varnish: amzn.to/3Wm4K6L
3M Particulate Filter (For Sanding): amzn.to/49VW2PP
⭐SOCIALS & CONTACT⭐
Website: tinylittles3d.com
Instagram: / tinylittles3d
Twitter: / tinylittlesyt3d
E-mail: [e-mail]
Paints used to complete the resin statue were a mix of Vallejo acrylic paints, Monument Hobbies Pro Acryl, Army Painter Speed paints, Vallejo Xpress colors and Citadel Contrast Paints.
The Iwata eclipse airbrush was also used to create smooth blends and glazes for this concept art.
#3dprinting #painting #timelapse #anime #manga #relaxing #toys #collection #speedpaint #resin #xtoolf1

[@freed4555]

Amazing work bro. Jinwoo and Igris look fire!

[@Seecret]

I was not expecting that model to be so huge when you showed it all together wow!

[@TinyLittles3D]

almost 20inches tall!

[@Sapy27]

@@TinyLittles3D Hi, did you scale it up even more or did you print it as is as the files came?

[@TinyLittles3D]

@@Sapy27 it was scaled up

[@Sapy27]

@@TinyLittles3D Oh, I didn't trust you and I sent it with the original box :( Perhaps for future projects it would help us to know what percentage was scaled, it would be very helpful, thank you very much.

[@random-content6969]

​@@TinyLittles3D hi man how long you took to make this? Also, what all tools u used? im interested in sculpting

[@SuzukiDLL]

Il_paddyy sculpts some amazing models. The print and paintjob turned out amazing as well!

[@TinyLittles3D]

he's a great artist

[@RH-Customs_official]

Good Video :) awesome work. I am printing these model right now and i cant wait to assemble and paint it.

[@TinyLittles3D]

Nice! Have fun painting it!

[@aberodriguez4149]

Lol XD I don't even own a resin printer but I thought I should invest some time in watching and listening to those that do have one or two. It's incredible how times have progressed and evolved these printers and creators. Had to sub, thanks for sharing your time and work.

[@kennyjustice2252]

This is beautiful! The colors just pop out and I love how it does look like it is glowing! Ur skills are just awesome! Also enjoyed how u gave pointers and how the printer works. Another thing I love how as of this video I'm still all alone on the membership list lmao! A army of one I guess 😆

[@DevilsWings]

Great video! Im printing Anime figures out as well! And right now im watching bunch of videos how to do stuff like this. Hope i don´t ruin it too much :D

[@TinyLittles3D]

Don’t be afraid to make mistakes. You can always print a new one or keep it as a way to see how you progressed over the years.

[@dauntusgaming]

My boy! What painting mat do you use? Love your style. Would love to see a workbench tour!

[@SculptEon]

All the details and hardworks, respect

[@SerafinGrivel]

You are sooo good at painting! looks clean af👌

[@4eva_Studio]

Great videos man 🔥 keep doing your thing.

[@TinyLittles3D]

i will! Thanks!

[@crazyssn]

Another amazing work! The introduction of equipments and “how to” part was very interesting.

[@Pollux99135]

For the eyes you should really start off with white then follow it up with a black outline it allows room for mistakes and would look cleaner imo

[@j_rock578]

Thank you for doing this. I've been struggling about the paint scheme for Igris

[@Gobey1Kenobi]

I personally follow Samiho studio's! its amazing!

[@AngryPeopleReplyToMe]

Subbed. I loved the tutorials.

[@albersantossilva]

absolute cinema

[@pattyscker]

omg that is so fucking beatiful

[@israelmartinez4097]

Printed that the other day now I’m working on onslaught from X-men. Made by the Medusa chick she puts her logo on all her models

[@Wa11breaker]

Is this model pre-supported? Damn it looks awesome!

[@noctisarcanus7894]

Amazing video! Subscribed! Do you think you could give us an estimate on how much money would someone need to make something like this model from start to finish? Considering not just the printer but also the supplies, paints, brushes, other machines needed, etc? Around $1500? $2000? It would be nice to have a gross estimate in order to know if I would be able to financially recover someday from that purchase 😅

[@Ryuga821]

Hey man, that's cool video, thanks for the details and the links for every item! Can you tell how much a figure would cost in total including printing, cleaning and painting? Of course it depends on the figure details and size but would be good if you can tell an average cost.

[@felipeomeloo]

Superb work, man!!! 👏🏽👏🏽👏🏽

[@Pisaebbasta]

Gktwo is a dream!!! ❤

[@brandonjacksoon]

Liked and subscribed! I'm new here! It was interesting to watch.

[@Mobilesuit82]

Very quick question about lacquer lol, I use a booth and mask when using it but i realize that after taking the mask off there's still a strong lingering smell, is that safe lol? also love the work, always help to get inspiration and see new techniques on how to paint.

[@SeraphTech]

I'll be fdm and painting models before moving to resin due to the ventilation requirements

[@tsworkshop.models]

That Tamiya is enamel :P

[@TinyLittles3D]

It is 😅

[@kronosiii9379]

Thanks for answering like 80% question I had. Indirectly I "subcribiede" XD I know how to write it just brain not braning.

[@SnakebiteHH]

that is fucking awesome

[@RomansEtianen]

Are the 3d model you are using already with the fit in joints part designed, or is that something you do yourself? If so how do you do that?Is there a software?

[@Rogueshadow217]

What % did you print the pieces at? Was it at 100% or was it bigger?

[@HolyMoly69364]

Nice looking figure once again! Though you said first time using lacquer when it's an enamel paint.

[@TinyLittles3D]

Lol, ouppss. I guess it further proves it’s my first time using it

[@HolyMoly69364]

@@TinyLittles3D It happens! But now that you got some, just get some clear lacquer and you could try the lacquer over enamel technique! Works very well for eyes.

[@aberodriguez4149]

At the 2:00 marker I see on the right side of the screen a plastic container I think you use to pre-rinse could you tell me perhaps the size of it, I would greatly appreciate it since I would like to get involved in this hobby. Thanks very much and thank you for sharing.

[@Owlkyd]

Amazing bro!

[@thadude3]

looks great!

[@Raretdr]

I only can see on your patreon "pictures posts". Are there any videos tutorial too, to paint skin? Patreon tells me, you have only 1 video there.

[@TinyLittles3D]

Currently I only made one video tutorial painting eyes. I will have more in the future including skin tutorials

[@Anab32mtl]

very nice model

[@flaringnostrilz]

Very nice

[@Roycehetutua]

wow wow wow wow!!!!

[@samseverino2788]

What are your layer and base exposer settings on the gk2

[@samael.projects]

GoodJob!

[@rdgd1rd]

I have this printer and it’s great but man it prints very slow my Flashforge print way faster and way cheaper , how can I make my uni print faster ? With my flashforge it used to take me 1hr to print models now with my new one same model takes 15 hrs I don’t get it .any help will be appreciated

[@TinyLittles3D]

You might want to adjust your lifting/ retract speeds.

[@rdgd1rd]

@@TinyLittles3D thanks I’ll try that!!

[@azuric12]

TAKE MY MONEY !

[@DeeeFoo]

I'm considering getting a Saturn 3 or 4 down the line. Would you say a 10" build plate is a good size for printing figures of this scale?

[@TinyLittles3D]

The GKTwo I’m using has a 10.3” build plate. A 10” one shouldn’t be an issue

[@DeeeFoo]

@@TinyLittles3D Nice! Thanks. Love your work BTW, you've inspired me to take up this hobby.

[@TinyLittles3D]

@@DeeeFoo glad to have you on board! hope you enjoy your printing journey!

[@DeeeFoo]

@@TinyLittles3D Follow up question, do you varnish/clear coat your figures after you finish painting them? I generally varnish anything I paint to give them a layer of protection, but am unsure whether it's worth it for display pieces like figures.

[@enyu2855]

you are not selling this for an affordable price i am assuming?

[@s4toru.ae0]

do escanor please

[@nomisspell]

Yo, Ive been thinking about getting a resin printer lately. Are the fumes that everyone talks about anything to worry about? I looked on reddit, they say that its pretty not good, but it seems a just bit echo chamber-y. Do I need a whole other room for a resin printer?

[@AccuserAnimations]

Should have went with red for igris

[@hassanh20]

is there any way you can put the names of the actual paints with the brand that you used in this video?? I'm trying to learn how to air brush using your videos so I want to make sure im using the right paint and colors.

[@TinyLittles3D]

I’ll keep that in mind. Thanks for the feedback

[@hassanh20]

@@TinyLittles3D Appriciate you!

[@MisterKala]

Hello ! Quick question, I see holes on your models, how much do you configure your hollows? 3mm?

[@TinyLittles3D]

Most of the time 2mm

[@EdgardoCosmezethstrike]

I have a question. Are you hollowing out the print? I am trying to print the base for this model and it always ends up having issues due to how heavy it is. Any recommendations?

[@TinyLittles3D]

Yes, the base is hollowed. If you don't want to hollow, try adding more supports or stronger supports. Increasing bottom layer exposure might help too

[@EdgardoCosmezethstrike]

@@TinyLittles3D thanks for the reply. I am trying to understand LycheeSlicer better and I’m a little bit afraid of hollowing since I’ve never used it before and I’m afraid of resin staying inside or even the IPA staying in and not drying properly. I’ll add stronger supports.

[@sebastianvergara9526]

What top coat do you use?

[@gwvw____8301]

Are there any cheaper alternatives for uniformation GK2 ?

[@blaze0ne2]

Elegoo Suturn 4 and 4 Ultra are less than half the cost but they don't come with a heater but for $50 more they offer a heater for their printers.

[@BigSooshiRoll]

how much resin dis this take

[@darren990]

all the tubers are saying the same get this printer.but the big but is that printer was given to you guys for free..not one of you have to fork out the massive price tag for that printer would you can you

[@Axel-or6lk]

whtat is the thing u use to paint?

[@TinyLittles3D]

Do you mean the airbrush?

[@bmxpipex]

Great work!!

[@sahilalikhan3416]

do you have artstation account

[@TinyLittles3D]

I dont. Should I get one?

[@IzzGoobyTime]

too bad the printer is too expensive for an amateur/beginner.

[@fmawhiteknight]

It was the very first resin printer I bought. It was scary to spend so much on something I didn't know but I don't regret it. I was printing almost immediately

[@patrickbakema5576]

Subjective. Have mine 1 year now. Amazing

[@magikarp2063]

You can buy a printer that is both cheaper and better then this one anyway.

[@moe5541]

@@magikarp2063name?

[@oreixx]

@@magikarp2063yea no

[@D.3.N]

7:53 It's enamel, not lacquer

[@TinyLittles3D]

You’re right

[@bebo6750]

I want so bad this printer, but seems to be a slow printer.

[@EyesOfDalton]

how much of a quality loss is fdm

[@jessicamdo]

Feeling more and more like buying a 3D printer. So much stuff I'd like to print and paint (●'◡'●)

[@TinyLittles3D]

That’s exactly the feeling I had and made me start this hobby

[@jessicamdo]

​@@TinyLittles3D which are the essencials tools you'd recommend for someone starting? As a reminder, this is an expensive hobby here in my country so just the essentials haha 😆

[@D.3.N]

0:25 But it is only 8k, where the competition already has 14k. The printing area is also not the largest.

[@bossjoe9335]

What does it matter? The model itself isn't 8k or 14k levels of detail

[@D.3.N]

@@bossjoe9335 It depends on what model you are printing and on what scale, and I also wrote about the printing area, and something larger may not fit here. Maybe the printer isn't bad, but it's definitely not better than others on the market.

[@fabrice1142]

8k 14k 16k don't really matter. You need to check the resolution of layers express on micron. Some small 4K printer will print better that some 16K big printer.

[@D.3.N]

@@fabrice1142 yes, but I wrote about printers of a similar or the same size, that they have a higher resolution.

[@FkshyRieot]

Moore Jennifer Jackson Sarah Smith Karen

[@animevoice7457]

why can't they just come out..... with the colors we made for them that sucks

[@ahrivixen5594]

very interesting and looks good, is this the same process they do for anime figures? if anyone knows

[@TinyLittles3D]

it's unlikely. Mass produced anime figurines are most likely made with molds.

[@ahrivixen5594]

@@TinyLittles3D ooooo ok ty for the great wisdom. ;o this makes me wanna get a 3d printer now, it looks so fun to do stuff like this,