tips 01 : Reverse wash gunpla

[@traskaan]

I was looking up reverse wash coz I needed it for my next project, lo and behold it a reverse wash video with my next project, Sinanju. Thank you so much!

[@51bpegasi]

thanks for making this vid, worked good for me! there's so much confusion with lacquer/enamel/acrylic, guys at the store totally confused me with this. so i airbrushed primer onto my piece, then AK Xtreme Metal aluminum, and lastly Vallejo Model Air black. used a cotton swab with water and wiped the black off the raised parts. i think the reason this worked is because AK Xtreme Metal is solvent based and Vallejo Model Air is water based.

[@natalebabbo-gunplaanddioramas]

Awesome tutorial and great finishing!

[@platonicbuu7454]

This is the exact piece I need this for lol Thank you

[@ethanaguilera6040]

So you use a primer, lacquer paint, lacquer paint, enamel, then use enamel thinner?

[@commodorenostrils]

Very clever and great results

[@shindoushuichi0287]

geez I feel like this would be so easy to screw up the order of color operations. Like this I feel like would only work well if you had a part that had this kind of height split

[@customtips3207]

Yes I agree, I think use less damping thinner to wash and angle of cotton bud can help a little for final process when it not height split parts.

[@Sharkey007x]

gun cleaning swabs are your friend. They don't leave behind hairs, and they have a good point too

[@barbatosrex9473]

@@Sharkey007x gun cleaning swabs are one of my favorite items on my bench

[@Sharkey007x]

@@barbatosrex9473 they were a godsend for cleaning out airbrush when a friend recommend I check them out, such a huge upgrade over q-tips

[@arenowsmoker8903]

That was so satisfying to watch, I’m 100% buying a sinanju hg now

[@ricardorivera9894]

Wow 😊

[@Payomstyle]

ดูเพลินมาก ๆ ค่ะ จัดแสงดี เห็นรายละเอียดของชิ้นงานที่กำลังทำชัดเจน รอดูคลิปต่อไปเลยค่ะ🔥

[@customtips3207]

ขอบคุณมากนะครับ ขอบคุณจริง ๆ

[@VinhPham-jx9dc]

how about thinner for enemal with airbrush 1:1? please

[@bobikoart]

Super clean, CRISP details

[@customtips3207]

thank you very much 😊

[@thatgreenfur6584]

I did want to ask, why is the black layer right after the primer necessary, if you're just painting black on the very top layer?

[@SongShiyu]

Cuz gloss black base is required for a more metallic finish for metallic layers. He used star bright gold and it works better if there's a gloss black base. all paint layers except for the top layer are lacquer paints. The final black layer uses enamel paint. As enamel paint thinner does not dissolve lacquer paint, it can there for be used to wipe away the top most black layer without removing the lacquer layers below.

[@Sharkey007x]

@@SongShiyu so this does not work with acrylics?

[@Zephyrs009]

@@Sharkey007x it will

[@SongShiyu]

@@Sharkey007x depends on whether u put the acrylic above or below. In terms of paint thinner solubiliy, lacquer> enamel> acrylic. Lacquer can dissolve everything below it.

[@Arcanua]

@@Sharkey007x Depends on the acrylic.

[@NomaD7801]

Can I find these colors in a spray can?

[@sentosa_K]

Thanks for this tutorial!! 🔥 1 question whats the black tamiya after the primer paint for? Why not directly paint it with the gold gaia? Thanks 👍

[@Arcanua]

This is reverse washing....the whole point is to not have a masking hell when using the gold paint....using lacquer thinner would also remove ALL layers of lacquer used down to the primer.

[@nugiejati1808]

Can I use acrysion to substitute the enamel?

[@thatgreenfur6584]

I clicked on this video because I saw the exact piece that I need to paint lol

[@platonicbuu7454]

Same lmao

[@colonelsanders82]

Watching this after I free hand brushed black and gold on my Sleeves Dreissen, lol.

[@berserksamurai]

simple and to the point

[@haridtae]

ขอบคุณมากฯครับ ว่าแต่อยากเห็นเหมือนนั่งข้างฯเวลาทำงานเลยได้ไหมครับ ผมเคยทำแล้ว พ่นอีกอยู่นั่นจน ปิดติกเกอร์เลย555 มือไม่ถึง

[@customtips3207]

ขอบคุณครับค่อย ๆ ฝึกไปด้วยกันครับแกะตามคลิปทีละขั้นตอนน่าจะพอได้อยู่

[@paulwalking8598]

อีนาเมลเอาพู่กันทาได้มั้ยครับ ถ้าไม่มีแอร์บรัช ขอบคุณครับ

[@akumaking1]

Will stuff like Isopropyl Alcohol work?

[@azamdeen5643]

Black enamel must thin with thinner Mr hobby right

[@phutti3243]

ทำอีกเรื่อยๆนะคับ รอติดตาม

[@customtips3207]

ขอบคุณครับ จะพยายามทำเรื่อย ๆ นะครับ

[@dragoonzen]

awesome

[@zomshineshine9469]

ตามที่ผมเข้าใจ สีดำ+สีทองที่พ่นในตอนแรกคือสูตรอะคริลิค ส่วนดำในตอนท้ายคือสูตรอินาเมล พอใช้ตัวลบที่เป็นอินาเมล สีทองที่พ่นก่อนหน้า มันเลยไม่ติดออกมาใช่มั้ยครับ😄😄

[@customtips3207]

ใช่ครับผมตามนั้นเลย ค่อนข้างสนุกและง่ายมาก ๆ (ถ้าไม่มีข้อผิดพลาดนะครับ)

[@MachVampire]

Your awesome for this. Thanks so much.😊

[@afiqnaufal1298]

Does the enamel paint need to be thin and of it does what kind of thinner did you use?

[@birbx3r354]

Not original OP but from what I've seen others do, yes you gotta thin before airbrushing. Enamel thinner at 1:1 paint / thinner ratio or milk consistency seems to be what everyone is doing

[@Arcanua]

Enamel thinner is the only thinner you should be using and 1:1 ratio instead of Lacquers 1:2-3 ratios.

[@kAmAt1zZ]

Can I do that with spray can??

[@customtips3207]

Sure, but have to wait for a long time to dry 2 hours+ for 1 layer. and use a paintbrush to apply enamel

[@เรื่องเล่าในครัว]

ต้องปรบมือให้เลยครับ

[@customtips3207]

ขอบคุณครับผม

[@pathachai1]

คิดถึงตอนทำเองเลยอย่างยากนั่งระบาย5555

[@customtips3207]

ถ้า Reverse wash น่าจะต้องกังวลแค่ตรงทาให้เรียบถ้าเป็นพู่กัน แต่ตอนเช็คไม่ต้องกลัวเลอะมากรวม ๆ น่าจะสบายกว่าครับ

[@phat_gunpla_etc]

do you put a over coat of flat or glossy clear for the final step?

[@gundamchris1233]

Probably flat would be best it wasn’t vary shiny in the show

[@Arcanua]

@@gundamchris1233 Neither one is used in the video, the gold being used isn't super shiny and they used a satin or semi gloss black, NOT a gloss one so it will dull even further. Top coat is whatever you want your overall finish to be.