Tips and tricks of the woodturning trade

Start of a great order for great customer....
Few TRADE tips and tricks to help you out with specific jobs at hand.
Hope you'll enjoy🤗🤗
______________________________________________
AFFILIATE LINKS
KS SCHULTE WOODTURNING STORE
MIDI 2 PLUS LATHE
ksdrechselbeda...
RAZOR EDGE BOWL GOUGE
ksdrechselbeda...
RAZOR EDGE SPINDLE GOUGE
ksdrechselbeda...
KS BOWL GOUGE
ksdrechselbeda...
CROWN BOWL GOUGE
ksdrechselbeda...
KS SPINDLE GOUGE
ksdrechselbeda...
REVOLUTION TOOL ksdrechselbeda...
REVOLUTION MIDI
ksdrechselbeda...
STANDARD SCRAPER
ksdrechselbeda...
______________________________________________
GURTOOL TOOLS
Bowl gouge - www.gurtool.cz...
Spindle gouge -www.gurtool.cz...
Calipers - www.gurtool.cz...
Sanding pads - www.gurtool.cz...
_______________________________________________
www.tobi.si/en
CBN WHEEL
www.tobi.si/hr...
BENCH GRINDER
www.tobi.si/hr...
DIAMOND FILE
www.tobi.si/hr...
______________________________________________
TELACK
www.telack.hr/...
SANDING DISCS 75mm INDASA
www.telack.hr/...
SANDING ROLLS INDASA
www.telack.hr/...
Thank you very much for watching 🤗
______________________________________________
GURTOOL TOOLS
Bowl gouge - www.gurtool.cz...
Spindle gouge -www.gurtool.cz...
Calipers - www.gurtool.cz...
Sanding pads - www.gurtool.cz...
_______________________________________________
www.tobi.si/en
CBN WHEEL
www.tobi.si/hr...
BENCH GRINDER
www.tobi.si/hr...
DIAMOND FILE
www.tobi.si/hr...
______________________________________________
TELACK
www.telack.hr/...
SANDING DISCS 75mm INDASA
www.telack.hr/...
SANDING ROLLS INDASA
www.telack.hr/...
Thank you very much for watching 🤗

[@nadinelamont8922]

New mic is 1000% better. When listening with ear buds I did not have to increase and decrease the volume between turning and voice. Thanks for the tips. As always, great video.

[@tomislavtomasicwoodturning]

Thank you very much for feedback and kind words 🤗

[@revsmith3455]

All good, keep it up! Our are very helpful. Thank you.

[@STMwoodturning]

I always learn helpful things from your videos Tomislav. Your tips and techniques related to production turning and efficiency have been especially helpful to me. Your new microphone seems to be woeking very well. Cheers, Stuart

[@tomislavtomasicwoodturning]

Awsome, Thank you Stuart for feedback and kind words, I'm honored to be able to help out

[@changefortanzania]

I too learn a lot about production turning from your videos as that is my main interest in wood turning. Also love your 4 ways projects. Denny H.

[@user-ne5rr1ze8b]

Your new microphone is a very big improvement. Excellent demonstration of having a finished shape in mind and then going quickly for the end result.

[@MyLove-wj6pm]

A

[@tomislavtomasicwoodturning]

Thank you very much for feedback ☺️

[@tomjordan3326]

I like this idea. Good for using up small scraps. Good job buddy

[@johnwhitteron5296]

PS, I really enjoyed the recent video of the four of you discussing the Four Ways vids. More please.

[@Joe-wi1yj]

new mic is great

[@billy19461]

Mic sounds great. You are clear and there is little to no background noise. Love to watch you turn.

[@tomislavtomasicwoodturning]

Awsome, thank you for feedback ☺️

[@brianhawes3115]

One thing I do that you might like to try is I set my drill press up to make the hole for the worm screw to also be my depth hole, just speeds up production. I make tons of little bowls and batch cutting is a great way to spend the day at the lathe. Also the bowls are sized so I can clamp the foot and after the bottom is done the outer ridge fits over the outer part of the jaws, so l only change out worm out, just to cut down on too many tools to keep track of 😂

[@StephanieElizabethMann]

When I was first learning to use a lathe I made a large plate with a lip around it. It's made from camphor laurel and I use it all the time. I've had it for at least five years. It warps a little then goes back to flat. It's been in the microwave and has gained some patina of life and I wouldn't use anything else.

[@tomislavtomasicwoodturning]

That is awsome option as well and I use similar for years as well....no need to change but still a little gift for myself is a good thing 🤗

[@MarklTucson]

Very good video; really like the way you approach letting the wood stabilize before final turning. Hadn't thought of doing that to turning projects; it makes perfect sense. I did something similar to what you described when I was building furniture (haven't done that in a while) -- I would let the wood acclimate to the shop, then rip the boards to rough dimension, and let them settle before planing and jointing them. Since we live in a desert environment, that seemed to be sufficient; I didn't need to rough plane or joint the wood. The microphone sounds really good. It's easy to hear you and the machine sounds are greatly reduced.

[@tomislavtomasicwoodturning]

Thank you very much for feedback ☺️

[@donntisch365]

Picks up sound of the gouge on the wood much better. A hidden benefit to help understand your expert use of allowing tool to do the work. Love it ❤

[@tomislavtomasicwoodturning]

Thank you very much sir ☺️

[@missteeturns]

Sound quality is excellent with the new microphone. Thanks for sharing your techniques on rough turning.

[@tomislavtomasicwoodturning]

Thank you very much for feedback ☺️

[@SouthDakotaBowHunter78]

I make jewelry boxes in bulk like this.... the audio is 100x better thank you for sharing your work is always great

[@tomislavtomasicwoodturning]

Awsome, thank you for your feedback, I need to make jewelry box so that could be a video as well 😀

[@mikemelle5407]

Stacking the odds in your favour. Great sound…what kind of microphone?

[@tomislavtomasicwoodturning]

Aaaaa yes, thank you, I could not remember it🤗 Thank you for feedback, the mic is deity d4 mini, shotgun mic.

[@stevenhansen8641]

Thanks Tomislav I look forward the next video. The new mic sounds great 🕶

[@tomislavtomasicwoodturning]

Awsome, thank you Steven ☺️

[@ronnieoreilly821]

Great video as usual and new microphone works well

[@tomislavtomasicwoodturning]

Awsome, so glad to hear that ☺️

[@robertreihsen9096]

Sounds is great!

[@tomislavtomasicwoodturning]

Thank you 😀

[@mikek47]

I do like the quality of your new mic.

[@tomislavtomasicwoodturning]

So glad to hear that, thanks for feedback

[@ronkiskowoodart9680]

Two thumbs up on new microphone. Very helpful video thanks as always!!

[@tomislavtomasicwoodturning]

Awsome, thank you 😀

[@lacoutardes]

Hi Tomislav, the new microphone did a great job and you have a sound limiter, that's excellent. Bonjour Du Quebec. A+

[@tomislavtomasicwoodturning]

Thank you very much for feedback ☺️ Much appriciate

[@jackthompson5092]

Excellent sound Tomislav and great lesson.

[@tomislavtomasicwoodturning]

Glad to hear that ☺️

[@tonyturnswood]

The new mic really makes a nice clear representation of your voice. Love this project!

[@tomislavtomasicwoodturning]

Thank you sir very much 🤗

[@clydeschuyler]

The microphone is great. Crisp and clear.

[@tomislavtomasicwoodturning]

Awsome,glad to hear that ☺️

[@johnwoods9995]

new mike is fine, sound crisp and clear

[@tomislavtomasicwoodturning]

Awsome, glad to hear that. thanks for feedback

[@bryanmccabe3632]

you and i are on the same page , love your videos, thanks, Bryan McCabe,AKA, Woodbutcher

[@tomislavtomasicwoodturning]

Thank you Bryan 😉

[@Tremorwoodworks]

The new microphone is great. Thank you for investing in it.

[@tomislavtomasicwoodturning]

No worries, thank you for feedback

[@clydeschuyler]

Awesome video! Can’t wait for the next part. Love your honesty.

[@tomislavtomasicwoodturning]

Thank you very much 😀

[@davidbarnes5953]

Nicely done, I wish I could turn as fast as you do. Looking forward to seeing them finished

[@tomislavtomasicwoodturning]

Thank you very much, its just practice and repetetive work ☺️

[@iancompton6961]

you must have studied under Richard Raffin - i can see his technique in most of what you do. good video - good sound - good content - thank you

[@tomislavtomasicwoodturning]

Thank you very much for feedback, and yes , Richard is my mentor so I do a lot of stuff similar🤗

[@jamesstrathy2178]

Good sound great turning!

[@tomislavtomasicwoodturning]

Thank you very much 🤗

[@alandisomma-od5fz]

Love your work. I always learn something new from your turnings.

[@tomislavtomasicwoodturning]

So glad to hear that ☺️

[@MrKevincryan]

Such a great video, thank you for the tips. Mic sounds great 👍

[@tomislavtomasicwoodturning]

Thank you😀

[@randywood4782]

Your microphone sounds good and good job on the bowl 🥣 😊

[@tomislavtomasicwoodturning]

Thank you sir for feedback ☺️

[@brianremington5780]

Sounds very good!

[@DavidBird-uu8km]

Very nice, your new mike sounds great,another very entertaining and information video.

[@tomislavtomasicwoodturning]

Thank you very much 😀

[@William_Kenny]

Great video tom new mike works great.

[@tomislavtomasicwoodturning]

Awsome, thank you Will

[@timofeyzhukov-khovanskiy9173]

Sound is great!

[@tomislavtomasicwoodturning]

Thank you, great to hear that ☺️

[@Bunk599]

Voice quality is vert good.....so is the turning quality.

[@tomislavtomasicwoodturning]

Thank you 😀

[@karlsangree4679]

New audio setup sounds great.

[@tomislavtomasicwoodturning]

Glad to hear that 🤗 thank you for feedback

[@Bootes1]

Thanks for the tips, always helpful. The new mic sounds great.

[@tomislavtomasicwoodturning]

Awsome, glad to hear that

[@johnwhitteron5296]

Great stuff Tomislav, as usual. What is the title of the video of the finished bowls? New mic sounds fine.

[@OregonOldTimerWOODTURNING]

Mic works very well! Suppresses background noise--lathe, wind, whatever--but lets your voice come through clear.

[@tomislavtomasicwoodturning]

Awsome, thank you for feedback and for watching 🤗

[@marmotwiyaka136]

Sound is great.

[@tomislavtomasicwoodturning]

Thanks for the feedback ☺️

[@boooshes]

Nice demo. New microphone sounds great.

[@tomislavtomasicwoodturning]

Awsome, glad to hear that

[@harlowchandlerjr.6371]

Sound is good. Yes, wood warps, but if you're starting with the tree you can select for wood that won't warp as much--time of year you cut it, internal stresses--such things make a difference. I would like to know what you watch for to minimize problems and I think others would too.

[@tomislavtomasicwoodturning]

You are completely right , a lot of factors play and even with that, its not a 100% thing.... Wood is natural and small change in humidity can couse to warp... Thank you very much for watching

[@tomislavtomasicwoodturning]

And for feedback ☺️

[@larryd6390]

Beautiful

[@tomislavtomasicwoodturning]

Thank you 😀

[@ValentinaFaussone]

Hello Tomislav, what are the big lids blanks dimensions? I tend to work onto too small pieces and then I have problems in having good/desired results. I plan to "copy" your project as exactly as I can as a solid skill building exercises. Knowing the exact size you started with would help me a lot. Thanks.

[@tomislavtomasicwoodturning]

Hi Valentina, really can't remember but roughly its 2cm bigger diameter then the base.....

[@ValentinaFaussone]

Thanks! I tend to work in mini sizes, but this weekend I want to push myself into something bigger. This double bowl would be perfect @@tomislavtomasicwoodturning

[@Pabloos8634]

Bonsoir Comment c’est fait le système avec La vis? merci et bonne continuation 👍👍

[@jorisdemoel3821]

I really look forward to seeing the next step, and especially the finished product. Sound is great.

[@tomislavtomasicwoodturning]

Awsome, thanks Joris

[@chrissimmoms1550]

Hi, just to say your voice Mike and lathe mic are now far more balanced, I nolonger need to turn the level up for your voice and down for the lathe. Much better than before.

[@tomislavtomasicwoodturning]

Awsome, so glad to hear that ☺️

[@mnp1964]

Sound is good if you wear a face shield the shavings would not be hitting you in the face and wearing a face shield is safer

[@tomislavtomasicwoodturning]

Each of us are responsible for own safety, I feel comfortble using just safety glasses.... There is more to safety around the lathe then just face shield.... Thanks for feedback on sound😀

[@michaelogden5958]

If you ever get some extra time, would you show and explain the design rationale of the dust collection system close to your lathe? Thanks! Instructive video as usual! Cheers! Oh, and the mic/audio sounds top notch to me.

[@tomislavtomasicwoodturning]

Thanks for feedback....🤗 I'll do design video on dust hood.... In meanwhile you can check out Richard Raffan's version, both are really the same.... He has it under workshop tour video

[@michaelogden5958]

I watched Raffan's video. Thanks! Now I need to find a way to cut a 4-inch PVC pipe at a 45 degree angle. Maybe my lumber yard/hardware store has a huge miter saw of some sort. 🙂@@tomislavtomasicwoodturning

[@tomislavtomasicwoodturning]

@@michaelogden5958 jigsaw is great option....round and a round

[@rwyse1]

Another great demo learning a lot from you cheers Ps ware did you get your thickness calipers

[@tomislavtomasicwoodturning]

Thank you, calipers are from GURTOOL company in Czech Republic

[@dbull46]

Your new mic is really good. I listened to this video with ear buds and background noise levels are now reduced and your voice is also clearer. 👌 What video editing software are you using Tom. Thanks again.😊

[@tomislavtomasicwoodturning]

Thank you very much for feedback ☺️ Software is youcut and for sound I use lexia

[@dbull46]

@@tomislavtomasicwoodturning great and thank you. I have learnt so much from you.

[@changefortanzania]

I am planning on doing some wood turning videos from my. Shop . You said you had a new microphone what brand or style is it please?

[@tomislavtomasicwoodturning]

Currently I use shotgun mic from Deity...works good but you have to position it so it Picks up voice and lathe noice but more on the side of the voice.... I plan on buying wireless mic to reduce cables....

[@changefortanzania]

Thanks, and I really learn a lot from your videos.

[@victorprimack2070]

Microphone good. Sounds clear but gives you a bit of an accent, Ha. How many times did you sharpen for that stack of wood?

[@tomislavtomasicwoodturning]

Thanks 🤗, Well I have accent since English isn't my native language.... I sharpen only once before starting.

[@victorprimack2070]

@@tomislavtomasicwoodturning just kidding about the accent, you speak quite clearly. Incredible that you only have to sharpen once!

[@tomislavtomasicwoodturning]

@@victorprimack2070 I would sharpen more if I was doing finish product.this rough stage is more forgiving.

[@rwyse1]

Ps sound quality is very good

[@tomislavtomasicwoodturning]

Glad to hear that,thanks for feedback

[@ciceroartesao7760]

que madeira é essa amigo parece ser macia

[@tomislavtomasicwoodturning]

Its hard maple, works great but hard