I recently found out that the opti on these engines can be installed incorrectly so I go over some of that and how to install the water pump seal without ripping it to save you money and time
Пікірлер: 11
@asthorman3 ай бұрын
Thank you for the video! I will be sure to put mine on correctly. Thanks to you. I have an oil leak from my timing cover (traced the leak with dye) on my lt1. Right now, i have the opti, water pump, crank hub, oil pan, and more all torn off - fun stuff!
@fbodyfanatics19973 ай бұрын
Glad I could help and it's definitely a job for sure hope everything goes smoothly
@dylekpolski73552 ай бұрын
Thank you very much! I was looking at the new one and couldnt remember if the tab goes in the one with the square marking. Thanks again!
@fbodyfanatics19972 ай бұрын
No problem happy to help
@fbodyfanatics19972 ай бұрын
No problem happy to help
@dylekpolski73552 ай бұрын
@@fbodyfanatics1997 I pulled the timing cover off and it ripped the oil pan gasket! I hate this car now too! 😆
@fbodyfanatics19972 ай бұрын
@dylekpolski7355 sounds like mine lol my car is christine you fix one thing and another breaks I went to put my seals in while doing the opti and didn't really until last month my timing cover has a Crack in it I thought it was just the seal leaking
@---Wade---5 ай бұрын
Thanks for taking the time to warn of us of this problem. I'm going to install the seals and opti in a few days. I did this once before in one of my first C4s around 20 years ago. Bought a GM opti, in '96 it was $800. Got it in and the car ran worse. The opti was bad. At least the 2nd time it was lot easer. This was in the days before KZbin so you were pretty much on your own. I think it took a half a day to just get the crankshaft pulley off the first time. Oh, the reason I did it myself was the Chevy dealership said the new opti and labor would be $1,800. I was thinking, how hard could it be?
@fbodyfanatics19975 ай бұрын
No problem and I had to do mine 3 times I bought 2 optis from oriellys and the first one was locked up when I got it and the second one the cars computer didn't like the sensor inside so it ran like garbage and was misfiring the third time I went with one from petris enterprises and it's been fine ever since
@Ryan-ps4wrАй бұрын
when i installed mine i made sure it was all lined up and it went on without a fight thinking it was all set. go to start the car up and she just sputters as if the timing is off. is it possible my opti is bad or possibly installed wrong even tho it was lined up?
@fbodyfanatics1997Ай бұрын
The timing is most likely off even with my one from oriellys being bad the car still started but didn't run good a good way to tell if it is off is if it pops after u stop cranking it's definitely the timing