I needed to remove one of the door handles on my Sprinter and couldn't find a good tutorial video on it - so I just did it myself and recorded the process. I hope people find it useful! WEBSITE workshoplateral.com
Пікірлер: 19
@effinog3 жыл бұрын
Use a small piece of hosepipe or similar piece of tubing to prevent dropping the screw into the door panel.
@T44YPE3 жыл бұрын
Thank you ive just snapped mine
@CastewaPL4 жыл бұрын
Mega thanks. I was trying to remove it for like ... 5h ?
@superwout2 жыл бұрын
Thank you very much, I have rust issues too, how can I treat the inside of the panel best? Any tips on that? Grtz from Belgium!
@LaLa-yp6dk2 жыл бұрын
My 2020 sprinter has been in the shop more than on the road 😰
@Wendybellrings4 жыл бұрын
You did far much work than necessary there. Leave the inner door panel and handles on - don't undo the screw inside the door on the lock and lose it 3 times. Just take the hex bolt out from inside the door jam - nudge the entire door handle towards the middle of the door and the whole handle pops out. Takes less than a minute. Sorry for the bad news.
@aztecadog4 жыл бұрын
thanks from mexico 'mate' & 'cheers'
@mikepruett1745 Жыл бұрын
Why didn’t you take the lock cylinder off that’s what I need to see right now
@alexsteini78312 жыл бұрын
Thx
@alohadotmorgan5 жыл бұрын
here's the trick to getting the handle to go in: Use a screwdriver, come in low and lightly pry the metal parts towards the outside of the door. Once they are out of the way the handle will gently pop right into the door.
@irenedunne3525 жыл бұрын
do you have to connect any cables to the handle when putting back
@alohadotmorgan5 жыл бұрын
@@irenedunne352 no cables. the handle fits hooked into the door at the first end and hooked behind two small spring-loaded catches at the other end - the end you pull to open the door.
@irenedunne3525 жыл бұрын
@@alohadotmorgan my handle is dead slack when i pull it will not open the door i have to go inside and pull the other one to open the door
@alohadotmorgan5 жыл бұрын
@@irenedunne352 I don't know what the problem is but you will likely have to take the handle out or the inside panel off just to see. As it shows in the video, be careful not to drop that little bolt.
@irenedunne3525 жыл бұрын
@@alohadotmorgan yes will have look,, thanks for your help
@actionnews53762 жыл бұрын
Wowza
@Liveforeever2 жыл бұрын
How can I open it to change it because the handle has broken and has no resistance left?