Useful Woodworking tips and skills. Easy way to get the perfect angle

  Рет қаралды 80,430,241

Tips Workshop

Tips Workshop

Күн бұрын

Useful Woodworking tips and skills. Easy way to get the perfect angle. Woodworking ideas and projects. Woodworking ASMR. A Beginner's Guide to Woodworking. Carpenter Tips and Tricks
#shorts #diy #woodworking #tips #skills #carpenter #howto #project #idea #tools

Пікірлер
@kassscarter4420
@kassscarter4420 Жыл бұрын
Если бы вспоминал все лайфхаки которые я просмотрел,я был гением,а как до дела доходит,ничего не помнишь😁
@ebk304
@ebk304 Жыл бұрын
😂😂😂 right
@ebk304
@ebk304 Жыл бұрын
That’s why you save them in a KZbin Playlist 😂😂at least I do 🤷🏻‍♂️ 😂
@Mmark_Ttven
@Mmark_Ttven Жыл бұрын
Да и под рукой ничего нет
@просто21млн
@просто21млн Жыл бұрын
сначала купить весь инструмент... потом запомнить... потом чтоб пр годилось...
@ЖандарТажимов
@ЖандарТажимов Жыл бұрын
😂😂😂😂😂
@erwinkunze4091
@erwinkunze4091 Жыл бұрын
I’d be calling someone else to push down the wood piece while I’m securing the other piece of wood with screws, but then I’m not a handyman at all. Kudos to these men who are efficient at what they do. 👍
@MK-fm3ln
@MK-fm3ln Жыл бұрын
This still seems easier with two people. Holding crowbar with one hand and a drill in the other hand? I am no handyman but I don’t see how having each of those things in one hand without a second person would be that easy
@jimreed5364
@jimreed5364 Жыл бұрын
Ah experts. Where were you when i slammed my wrist with my trusty ewing and broke my wrist
@nodemever3291
@nodemever3291 Жыл бұрын
@@jimreed5364 which is what I did the morning of the first time I bought an Eswing framing hammer it hurt like hell I threw it across the street deep as I could into the woods and told everyone on the crew not to go after it just leave it where it landed Then I went back to the truck and got my 22oz Plumb strait claw long handle framer and went back to work I'm about to turn 74 and I still have that Plumb and bought another just like it some years ago for 8 bucks just couldn't pass it up a flea market find
@teresamelo4132
@teresamelo4132 Жыл бұрын
No siempre tienes a alguien cerca y que esté disponible....son ideas geniales y muy útiles!!!!😂
@sandrakicklighter2735
@sandrakicklighter2735 Жыл бұрын
Not everyone has the luxury of having another person available to help.
@MeAgainGOH
@MeAgainGOH Жыл бұрын
Carpenters used to do this with nails before deck screws were invented.
@jmo13322
@jmo13322 Жыл бұрын
Well what screws should he use???
@Thomas-vc1uf
@Thomas-vc1uf Жыл бұрын
Think he was saying that before mankind went to using screws to build....😊
@user-lv8bq1is4t
@user-lv8bq1is4t Жыл бұрын
И те гвозди ковал кузнец!
@s7shorty
@s7shorty Жыл бұрын
Still do this nails are still often preferred
@djdoc06
@djdoc06 Жыл бұрын
Before cordless power drills made screws fast enough… they used nails.
@CreationHolicX
@CreationHolicX 4 ай бұрын
An easy yet extremely practical idea! Thank you for sharing!
@DOGSDOGGER
@DOGSDOGGER Жыл бұрын
japan: "you cut it wrong, do it again" - US: "hold it under tension, forever :)))"
@leesparrow8637
@leesparrow8637 Жыл бұрын
One day you'll realise that everything is always under tension
@eden1909
@eden1909 Жыл бұрын
@@leesparrow8637 My shoulders are under tension. I need a chiropractor. T.T
@rispy4875
@rispy4875 Жыл бұрын
Lol & which one lasts longer?
@taekwonStudent09
@taekwonStudent09 Жыл бұрын
@@rispy4875uh….the Japans….they aren’t an only 250 year old nation
@conorsmith636
@conorsmith636 Жыл бұрын
It's a bowed board, not wrong size
@marekzurawski3487
@marekzurawski3487 Жыл бұрын
Amazing, my first thought would be to push it with the bumper of my car.
@simonblower7280
@simonblower7280 Жыл бұрын
😂
@DaveL-m5j
@DaveL-m5j Жыл бұрын
Lmao,nice
@Виктор-м9г2м
@Виктор-м9г2м Жыл бұрын
😳😁
@Shiddyfooka
@Shiddyfooka Жыл бұрын
No way, I was thinking more of using a bulldozer
@linds2432
@linds2432 Жыл бұрын
This is why I come to the comments 😂
@lakewrites
@lakewrites Жыл бұрын
You're always impressing with your knowledge and simple tips no one thinks of.
@Tips_Workshop
@Tips_Workshop Жыл бұрын
Thanks 🤝👋❤️
@JimKirksHandsomeBrother
@JimKirksHandsomeBrother Жыл бұрын
Excellent. I won't forget.
@bradbradford8576
@bradbradford8576 Жыл бұрын
Reminds me of a dude I used to work with who thought he was brilliant. He'd still be explaining why it's better and I'd already be on the next one after my own complex strategy of pushing with my hand. You don't need to build a jig for every task. Sometimes you just gotta do it and move on
@user-bk2hn6yk3l
@user-bk2hn6yk3l Жыл бұрын
bro I hate yappers buddy would rather talk about it than get shit done
@timkrouse345
@timkrouse345 Жыл бұрын
F-it, close enough. We gotta git-er-done!
@genyridonate4418
@genyridonate4418 10 ай бұрын
Ah j'attendais le commentaire du génie qui viens baver sur du bon travail ! Je l'ai trouvé 😂
@mariapiombino426
@mariapiombino426 10 ай бұрын
9⁹
@cherylwilliams1823
@cherylwilliams1823 9 ай бұрын
Sometimes those boards are bent, so this would help in that case
@Impala_Lily
@Impala_Lily Жыл бұрын
Thank you … as a single pensioner who dabbles in home maintenance and improvement (with little to NO experience), little tips such as these are always welcome.
@tubro007
@tubro007 Жыл бұрын
When the heck are you going to use this technique dabbling in your home? Maybe when you're building the bomb shelter you dug out under your rental.
@Impala_Lily
@Impala_Lily 10 ай бұрын
@@tubro007 LOL …. Now don’t you go giving me ideas 🤣🤣🤣
@the90shangover
@the90shangover Жыл бұрын
I could watch these all day long ❤️💯👍
@MikeIsADemon-nm1ru
@MikeIsADemon-nm1ru Жыл бұрын
Do it! I dare you
@wilfredregor1994
@wilfredregor1994 11 ай бұрын
ASMR?
@Bell207B
@Bell207B 11 ай бұрын
I'd rather read the comments on how stupid the DIY was.
@kim87351
@kim87351 7 ай бұрын
Same
@irishguyjg_2ndchancerecovery
@irishguyjg_2ndchancerecovery 2 ай бұрын
Im sorry. Maybe get outside bub
@francespawlitschek5634
@francespawlitschek5634 Жыл бұрын
excellent🌸work smarter not harder🌸 🌴💜☮️💜🌴
@НатальяАвсиевич-ю1з
@НатальяАвсиевич-ю1з Жыл бұрын
Люблю смотреть народные мудрости! Спасибо
@thedcbroker7264
@thedcbroker7264 Жыл бұрын
I love tools and people who know how to use them
@benjigray8690
@benjigray8690 Жыл бұрын
A hundred and uses for a pinch bar.
@mustafaqusay523
@mustafaqusay523 Жыл бұрын
tools love you too
@Luke-pk9fe
@Luke-pk9fe Жыл бұрын
You should see me use my tool
@GollumHatesNastyChips
@GollumHatesNastyChips Жыл бұрын
So you definitely don’t love this channel
@benjaminbradley780
@benjaminbradley780 Жыл бұрын
Yeah but big dog left a hole
@lostpyper
@lostpyper Жыл бұрын
If you keep using whitewood and sheetrock screws, you can expect to replace this every year
@larryhackleman2093
@larryhackleman2093 Жыл бұрын
This
@kylemartinson722
@kylemartinson722 Жыл бұрын
Is this a joke?
@love-ei5fg
@love-ei5fg Жыл бұрын
Круто
@brownstonecustomcabinetry5309
@brownstonecustomcabinetry5309 Жыл бұрын
That's not white wood and those aren't dry walls screws. See how the thread only goes halfway up? Those are construction screws. See the grain on the right hand board? That's hard wood. He's just not in America.
@TheBauerone55
@TheBauerone55 Жыл бұрын
They're not sheetrock screws, they're not threaded to the head. Try again keyboard warrior.
@buildingtrickcraftsman
@buildingtrickcraftsman Ай бұрын
really creative. Good luck, brother Qu.
@Tips_Workshop
@Tips_Workshop Ай бұрын
Thanks! 🙏🤝❤️
@user-ch6hs6ir3d
@user-ch6hs6ir3d Жыл бұрын
Саморезы в торец бруса это для отвода глаз. Через некоторое время обязательно вырвет.
@Игорь247
@Игорь247 Жыл бұрын
суть ролика как поджать доску а саморецы можно и под угом ввернуть
@russel8504
@russel8504 Жыл бұрын
меня уже вырвало от таких лайхаков
@AbuGadji-sw9xs
@AbuGadji-sw9xs Жыл бұрын
Ни куда её не вырвет, дерево со временем само приобретёт такую форму.
@paulomendoncasouza7981
@paulomendoncasouza7981 Жыл бұрын
Uma boa ideia para unir caibros.
@user-ch6hs6ir3d
@user-ch6hs6ir3d Жыл бұрын
@@AbuGadji-sw9xs похоже вы не в теме. Обратите внимание на расположение волокон в доске. Если вдоль волокон вкручивать (в торец), саморезу не за что цепляться.
@robtierney5653
@robtierney5653 Жыл бұрын
Most amazing video on the internet. It actually makes the world a better place.
@stevenvialpando8365
@stevenvialpando8365 Жыл бұрын
God took away my depression/Anxiety And has given me peace through the storm. He could do the same for you. If you're dealing with it or not. Know what it means to Repent & be Baptized. Jesus christ the living God is returning & he's the only way to heaven 🙏🔥 💯
@brainwin6881
@brainwin6881 Жыл бұрын
@@stevenvialpando8365you are a first.
@Dre__Day
@Dre__Day Жыл бұрын
👏👏
@bretthatesgirlsify
@bretthatesgirlsify Жыл бұрын
Lmao wtf
@ROBSwank-pm1vd
@ROBSwank-pm1vd Жыл бұрын
Simple Ingenuity is the BEST !!
@Lets_Go_Canes
@Lets_Go_Canes 10 ай бұрын
Actually bad idea. You don’t need more holes in the end grain.
@ЛучезарГуманный
@ЛучезарГуманный 9 ай бұрын
не простая!
@cutezilla4579
@cutezilla4579 4 ай бұрын
those screws are gonna loose in two days.
@BrianWilliams-wg3tm
@BrianWilliams-wg3tm 2 ай бұрын
Those ain’t deck screws just FYI
@Ryvaldojulius
@Ryvaldojulius 2 ай бұрын
This video really helped me a lot.❤🎉
@robertrgonzales2464
@robertrgonzales2464 Жыл бұрын
Holy shit! There hasn't been 1 million of these exact videos posted before? ABSOLUTELY BRILLIANT 👏
@garagekeys
@garagekeys Жыл бұрын
There hasn't been 1 million suckers to watch the videos
@bk126
@bk126 Жыл бұрын
すごい😮知恵と技術があるってうらやましい✨
@glennredwine289
@glennredwine289 Жыл бұрын
It helps to do it for a living,that when you develop these little tricks.
@ryangrimm9305
@ryangrimm9305 Жыл бұрын
Those are sheetrock screws, they will fail soon.
@bk126
@bk126 Жыл бұрын
@@glennredwine289 さま 本当にそうですね。たとえ収入につながらなくても、自分の身の周りのことを自分で解決できるのって自信が持てますよね。😊
@bk126
@bk126 Жыл бұрын
@@ryangrimm9305 さま なるほど、使う道具や材料も選んだ方が良いということですね。勉強になります。🌷
@rapiddog6666
@rapiddog6666 Жыл бұрын
Knew that trick ! Tip for you ! : start using torx and not phillipshead screws ! Life gets a lot easier. 🤙🙏
@clogat537
@clogat537 Жыл бұрын
Why
@JustB904
@JustB904 11 ай бұрын
@@clogat537Phillips are jokes. They should be relegated to dry wall and machine style screws. Torx are absolutely the way to go for wood screws.
@fluhartz
@fluhartz Жыл бұрын
so simple and so awesome..
@もすもすこんにちはです
@もすもすこんにちはです Жыл бұрын
勉強になりました。ありがろう👌
@木村重則-d2h
@木村重則-d2h 11 ай бұрын
ありがろう どういたしましてろ
@kamb8664
@kamb8664 Жыл бұрын
Whoever invented screws was a genius
@wakokaine6976
@wakokaine6976 Жыл бұрын
Thank you kind sir
@doom6985
@doom6985 Жыл бұрын
@@wakokaine6976 thank you sir, you truly are a blessing
@28toxicdavid38
@28toxicdavid38 Жыл бұрын
John Screw invented the screw.
@rocketvybe
@rocketvybe Жыл бұрын
​@@28toxicdavid38 I bet he screwed alot of people.
@themchannel853
@themchannel853 Жыл бұрын
My mom invented the screw
@CurtisJon
@CurtisJon 11 ай бұрын
Like a Boss.!! Well done
@Tips_Workshop
@Tips_Workshop 11 ай бұрын
Thanks bro 👋🤝❤️
@stevenmorgan5579
@stevenmorgan5579 Жыл бұрын
Next week: how to sweep floors with a jackhammer
@nodemever3291
@nodemever3291 Жыл бұрын
I don't have a jackhammer will a rotaryhammer work?
@haiba0502
@haiba0502 Жыл бұрын
@@nodemever3291нет мы им уже листья с участка убираем 😂😂
@alexanderarmstrong8225
@alexanderarmstrong8225 Жыл бұрын
I dont have a floor will the ceiling work?
@nodemever3291
@nodemever3291 Жыл бұрын
@@alexanderarmstrong8225 It's more important that you get a floor rather then worrying about a clean ceiling
@DarkMatterBurrito
@DarkMatterBurrito Жыл бұрын
Are you my upstairs neighbor?
@高嶋光幸
@高嶋光幸 Жыл бұрын
🌸無駄な無い、素晴らしい仕事、アイデアが最高🎉🍒
@大和田-o6g
@大和田-o6g Жыл бұрын
凄い👏✨ そうやると、ちゃんと上手くできますね!
@ancienttraveler5491
@ancienttraveler5491 Жыл бұрын
Wow! What a neat trick!!
@ТарханМехтиев
@ТарханМехтиев Жыл бұрын
У черных саморезов и так головки ломаются из-за расширение дерева, а тут вы решили их под давление закручивать?) 🤣💪🏽
@ИгорьГ-х2е
@ИгорьГ-х2е Жыл бұрын
Ниче они не ломаются, сказочник... под давлением?🤷
@vladimirklochkov9836
@vladimirklochkov9836 Жыл бұрын
стал замечать, что в подобных видео всегда такие вот деятели нарисовываются, лишь бы сказать, лишь бы сумничать попытаться. Такой бред несете
@ТурдашАли
@ТурдашАли Жыл бұрын
Это обычно, когда в комплекте с чем то, чёрные шурупы они ломаются. Например петля для двери их шурупы ломаются часто.
@PedroVieira-dl9ze
@PedroVieira-dl9ze Жыл бұрын
EytaaaxgroriaaaxeuxdigooooxoooiiiiiixgenteexboaaaaxxxeuxdigoooxevocexestaiiixestabizadoooxetrabalhandoooxcomxumaxferramentasxxruinnnxeuxdigooxnaoooxficaxassiiinnnxsofrendoooxevaiiixlogoooxemxumxestabelicimentoooxeadquiraaaxumaxboaaaxferramentaaaaxequexnaoxarrebentaaaaaxcomxsuasxasuasxconcienciasxeeadwlquiraxamarcaxdaxsuaxfuradeiraxxeamakittaaevocegarantidoooxeumaxmarcaxboaaaaaaxmaisxbarataaaaxesucessuuuequedeusxjesusxlheavbencoeeexeseguexdeusxjesusxcristoxcomxfexfexfexfirmexeforteexefielllequexvoceisxpedreiroxcarpinteiroxusaxatexacabaaaxeumxabracoxparaxcidadexdexsorocabaaaaaxeumaxomengeemmxboaxoaraxosxgruposxdexinternallxcancoesxemelodiasxlindasclxeboassxeoconjuntoxebandasxabaaaaxeuxsouxyoutubexpedrinhoxvieirXenaoxmarcoxbobeiraxetenhoxfexnoxonossoxdeusxjesusxcristoxfieldetodasmaneiraaaxeumxgrandeastrallxeageniallxcantoraxgospelxedeusxefiellxeuxseicquexnaoxestouxsoxeumaxgramdexfexfexnnoxtodoxopoderosooeamorosoo
@СергСерг-т6к
@СергСерг-т6к Жыл бұрын
​@@ИгорьГ-х2есаморезы не ломаются??? Ты кто, воин? Это ты что ли снял это фуфло и теперь оправдываешься? 😅Саморезы хорошо воспринимают вертикальную нагрузку, а вот как раз в таких случаях как на видео - гвоздь бы согнулся, но держал, а саморез, неважно какого цвета,или вырвет или лопнет. Ребёнок, иногда полезно не только в интернете залипать, но и что-нибудь руками попробовать прибить.
@yurikponomarioff
@yurikponomarioff Жыл бұрын
Никогда так не делайте. При таком креплении саморезы будут испытывать постоянную нагрузку на срез и в итоге лопнут. Да и вообще каленый саморез не для дерева, используйте гвозди.
@xyi-vam
@xyi-vam Жыл бұрын
Ну да ,для дерева калёные саморезы не подойдут,а вот для травы самый раз,ну или для кирпича.
@yurikponomarioff
@yurikponomarioff Жыл бұрын
@@xyi-vam каленые саморезы хороши для монтажа легких конструкций и отделочных материалов внутри помещений, причем если надо закрепить на дереве другой материал, металл, гкл, гвл и т.д. Использовать их в наружных силовых и несущих конструкциях верх глупости.
@oscarflores2079
@oscarflores2079 Жыл бұрын
No lo hagas como él ,piensa en otra solución,él solo te esta dando la idea.
@kamchadalochka1609
@kamchadalochka1609 Жыл бұрын
А можно закрутить саморезами, а для верности ещё гвоздей набить!
@ВіталійРябоконь-д2н
@ВіталійРябоконь-д2н Жыл бұрын
Ну, справедливости ради, каленый там только в прихвате, временный, два фиксирующих - шурупы. Но гвоздь я бы добавил, крепить с натяжкой на шурупы, ну такое...
@РукастыйМастерСамоделки
@РукастыйМастерСамоделки Жыл бұрын
Полезно очень!! Обязательно попробую. Спасибо автору👍
@Tips_Workshop
@Tips_Workshop Жыл бұрын
Благодарю 👋 Рад что понравилось 👍 ❤️ Удачи 🤝
@paulratcliffe663
@paulratcliffe663 10 ай бұрын
Old school 👍 can’t beat it 😀😀😀
@AlanPattinson-z9c
@AlanPattinson-z9c Жыл бұрын
Mitre joint ever heard of it, looks neater and prevents end grain being exposed to the elements.
@BlueGillage
@BlueGillage Жыл бұрын
Maybe the boards are going to be covered with something thatll keep them from being exposed to the elements.
@normatorres2310
@normatorres2310 Жыл бұрын
He is a genius! 👍
@mac7775
@mac7775 Жыл бұрын
First thing you learn in everything you do with wood construction.👍🏽👊🏽💪🏽
@dylanbyrne-pt6xk
@dylanbyrne-pt6xk Жыл бұрын
To use dry wall screws in exterior?
@NinjaSushi2
@NinjaSushi2 Жыл бұрын
​@@dylanbyrne-pt6xkforce bad joints to hold long enough until the job is done and you got paid. 👍
@cyclemoto8744
@cyclemoto8744 Жыл бұрын
@@NinjaSushi2 lol
@sandrasaltzman2170
@sandrasaltzman2170 Жыл бұрын
Thank you
@mrfxr1695
@mrfxr1695 Жыл бұрын
Drywall screws again😔
@emm6155
@emm6155 Жыл бұрын
You must love his videos that you know his screws. If it bothers, you don’t watch people like you is the problem with this world let the man rock.
@mrfxr1695
@mrfxr1695 Жыл бұрын
@@emm6155 the videos keep popping up. I don't look for them. The issue with drywall screws is that they are thin, snap easily, not structural fixture and must not be used in construction apart from plasterboard/drywall installation. I've seen big structural failures where people used drywall screws for fastening timbers, plywood, even roof battens and tiles. Drywall screws only for drywall. This guy has good ideas but bad screws
@riceracing3184
@riceracing3184 Жыл бұрын
@@emm6155 I’d say people like you are the problem with the world, don’t call out crap when you see it, now look at us!
@YkItzUnknwn
@YkItzUnknwn Жыл бұрын
Those aren’t drywall screws tho 😂😂😂
@YkItzUnknwn
@YkItzUnknwn Жыл бұрын
@@mrfxr1695the one he used as a anchor was a drywall screw the others aren’t
@jamesmancini1506
@jamesmancini1506 Жыл бұрын
I could've used that trick earlier today. To straighten one side of a long header. I'll be doing it tomorrow, if the lumber has a major crown to it. Thanks bro.
@Lilchino707
@Lilchino707 Жыл бұрын
Use a 16 penny not a drywall screw those we’ll bend or break on ya
@ohnohobo4815
@ohnohobo4815 Жыл бұрын
Dont screw into end wood. Put them in at an angle.
@Андрей-р8я8о
@Андрей-р8я8о Жыл бұрын
Век живи , век учись. Благодарю 👍👍👍
@dmitrijdenisov8882
@dmitrijdenisov8882 Жыл бұрын
Век живи, век учись и всё равно дураком помрёшь😅
@МарияВасина-п8н
@МарияВасина-п8н Жыл бұрын
дураком умрешь. этим заканчивается поговорка
@Виктор-ъ5щ5э
@Виктор-ъ5щ5э Жыл бұрын
И в продолжение , а всё равно дураком помрешь. Как говорил мой Дядя.
@philippe6295
@philippe6295 Жыл бұрын
Bien réfléchir avant d 'agir . gain de temps et bon travail . 😊😊😊
@stacymartin4730
@stacymartin4730 10 ай бұрын
Wow, that one’s cool. Good job.
@Tips_Workshop
@Tips_Workshop 10 ай бұрын
👍👋❤️❤️❤️
@sharicross547
@sharicross547 Жыл бұрын
Both boards are turned the wrong way. If you look at the end grain, they should be facing the other way toward the blocks
@peytoia
@peytoia Жыл бұрын
i realized the other issues with this (tension in the wood, potentially splitting it by drilling into the end grain, etc) but i was not aware that wood had a front and back side to the grain longways. if you have the time could you explain why that is? i love learning.
@amlethgradic9085
@amlethgradic9085 Жыл бұрын
i think they are building temporary framing. by the gloves it could be masonry. you are right. but i don’t think they care
@Jonnyturboable
@Jonnyturboable Жыл бұрын
Interesting point, I’m not really experienced in the area so never considered the grain and how it would warp over time. 👍
@adamr0161
@adamr0161 Жыл бұрын
Please can you explain this in more detail
@doctorcane
@doctorcane Жыл бұрын
@@amlethgradic9085 If its a temporary frame why would you?
@igorturchinyuk151
@igorturchinyuk151 Жыл бұрын
Old masters 50 years ago connected wooden structures without self-tapping screws using so-called “Dowel joints”.
@DamonMars-wr2zx
@DamonMars-wr2zx Жыл бұрын
Well they wasted their time
@wtfbbqbye
@wtfbbqbye Жыл бұрын
If you bust out dowels clamps and wood glue on this project, better hope nobody's around cuz they're going to be laughing their ass off...
@gunlover900
@gunlover900 Жыл бұрын
That's more like 100 years ago bro, 50 years ago was 1974. They had powertools and plenty of screws back then...
@dmitryfedorchenko882
@dmitryfedorchenko882 Жыл бұрын
From what, from precise work?​@@wtfbbqbye
@vasbrasers
@vasbrasers Жыл бұрын
And how long will the construction time be extended?
@Александр-з8ь6ч
@Александр-з8ь6ч 10 ай бұрын
золотые руки 💪👍
@nitabaker9851
@nitabaker9851 Жыл бұрын
Thank you!
@dummyfatso5537
@dummyfatso5537 Жыл бұрын
Always predrill the hole a size smaller than the screw so the wood doesn't split when screwing in the screw
@pachalo
@pachalo Жыл бұрын
Rotting wood in 5,4,3,2,1.
@ГалинаКа-р7б
@ГалинаКа-р7б Жыл бұрын
Спасибо, очень полезно!
@Hatori88100
@Hatori88100 Жыл бұрын
В чем польза ??? Тоже дом из газобетона будешь брусом стягивать ?)))
@ГалинаКа-р7б
@ГалинаКа-р7б Жыл бұрын
@@Hatori88100 про таких говорят - человек с узкими знаниями... а у меня широкий взгляд. Выровнять две перпендикулярные доски много где можно. Работай, брат и все будет в пользу
@ПетрФёдоров-э4ь
@ПетрФёдоров-э4ь Жыл бұрын
Эээто вряд ли😊 Запустить куда-то бригаду наемных работников без контроля- их работа НИКОГДА не пойдёт на пользу! 😂​@@ГалинаКа-р7б
@ShawnPitman
@ShawnPitman Жыл бұрын
Uh. Also, don’t drive a screw directly into the end grain. It’ll hold for now, but thermal expansion and humidity will eventually split the grain around the fastener.
@NewBrunswickOutdoorLife
@NewBrunswickOutdoorLife Жыл бұрын
irrelevant to this video.
@Fpvpilot928
@Fpvpilot928 Жыл бұрын
​@@NewBrunswickOutdoorLife the video is of drilling a screw into the end grain. This comment could literally not be any more relevant to this video, and I was curious how it wasn't the top comment.
@HGrrrr
@HGrrrr Жыл бұрын
So then how would you screw two boards like this together?
@ShawnPitman
@ShawnPitman Жыл бұрын
@@HGrrrr pocket holes. Toe nailing. Corner brackets or braces. Depends on what's easiest for you
@angelam6902
@angelam6902 Жыл бұрын
@@ShawnPitman Pocket holes and toe-nailing go into end grain at a 10-15 degree angle. Try again.
@Seniorworking
@Seniorworking Жыл бұрын
❤❤❤very nice
@louisdandrea7461
@louisdandrea7461 Жыл бұрын
I'm not a carpenter, but that's a cool trick! 😎 👍
@kkknotcool
@kkknotcool Жыл бұрын
No it's not, push it in with one hand and drill with the other and stop wasting time.
@glenroywatson9263
@glenroywatson9263 Жыл бұрын
👍👍👍👍👍
@TRUMPSTEINbenald
@TRUMPSTEINbenald Жыл бұрын
No, you aren't - neither is OP. End screwing timbers is not woodworking. It's woodjerking.
@MAcDaTHo
@MAcDaTHo Жыл бұрын
I am not a trickster, but this is a nice carpet!
@clacala
@clacala Жыл бұрын
I'm not a filmmaker but this is a good video.
@endless_story
@endless_story Жыл бұрын
Еще один лайфхак - не использовать черные саморезы )
@stosorokshest
@stosorokshest Жыл бұрын
Отличный лайфхак!
@hommeoursX
@hommeoursX Жыл бұрын
Да да, сто раз да
@thesteelworks8088
@thesteelworks8088 Жыл бұрын
I push on it with one hand
@ДмитрийУсов-н9з
@ДмитрийУсов-н9з Жыл бұрын
А что с ними не так?
@asmith8898
@asmith8898 Жыл бұрын
He didn't, he just removed it.
@thomasgreiner4910
@thomasgreiner4910 Жыл бұрын
I didn't think people actually made videos of good tool advice. Thanks for proving me wrong😊
@JesseLucas-mw3lv
@JesseLucas-mw3lv Жыл бұрын
They don't could of just pushed it in by hand and screwed it like a normal person instead of wasting your time doing all this non sense
@mileakin2689
@mileakin2689 Жыл бұрын
Great little trick
@devanworkman8745
@devanworkman8745 Жыл бұрын
Using drywall screws was definitely a mistake.
@JohnDoe-jq5wy
@JohnDoe-jq5wy Жыл бұрын
Good insight 👍👍👍
@siwa7160
@siwa7160 Жыл бұрын
Not drywall screws holding the timber. The One he pulls out is.
@rickgilbrt
@rickgilbrt Жыл бұрын
​@@siwa7160, the screws he leaves in have a smooth shank, but don't look like structural screws.
@that1roller33
@that1roller33 Жыл бұрын
Wood facing wrong way anyway
@ТатьянаЧембарисова
@ТатьянаЧембарисова Жыл бұрын
Где гипсокартон?
@CarlosTomasS.
@CarlosTomasS. Жыл бұрын
*Nie chce nic mowic ale to wlasnie wy nakrecacie celebrytow ktorzy kupuja lajki na Realfollow*
@tkrox8379
@tkrox8379 Жыл бұрын
Czym jest realfollow i o co wgl chodzi?
@РавильВильданов-я9д
@РавильВильданов-я9д Жыл бұрын
Людей не смеши
@РавильВильданов-я9д
@РавильВильданов-я9д Жыл бұрын
Как столбы из земли доставать умеешь
@edwardwilliam4007
@edwardwilliam4007 Жыл бұрын
😅😅😅😮😅😅😅😅😅😅😮😅😅😅😅😅😅😅😅😅😅😅😅😮😅😅😅😅😅😅😮😅😅😅😅😮😅😅😮😮😅😅
@BaxordirjonFozilov
@BaxordirjonFozilov Жыл бұрын
Лекин фойда ли ок
@Pilot-ATC
@Pilot-ATC Жыл бұрын
Черные саморезы + поперечная нагрузка = каждый год так будешь заново прикручивать
@nikolasidoroff8530
@nikolasidoroff8530 Жыл бұрын
И доска витая!! Высыхает и опять выстреливает...
@АлександрК-б5з2е
@АлександрК-б5з2е Жыл бұрын
Если будет сухо, то норм... Чёрные (оксидированные) саморезы не = говно.
@TheF411
@TheF411 Жыл бұрын
Чёрные, белые, жёлтые саморезы делаются из одной стали..Цвет-- это развод для тебе подобных)))
@artemhost1814
@artemhost1814 Жыл бұрын
​@@АлександрК-б5з2е они на поперечную нагрузку не годятся, лопаются
@darioalbertojuarezorellana6976
@darioalbertojuarezorellana6976 Жыл бұрын
​@@nikolasidoroff8530y vos como haces ?
@sosonic12000
@sosonic12000 Жыл бұрын
Simple yet so effective.. Genius
@Dan_Boston
@Dan_Boston Жыл бұрын
Genius 🧙‍♂️
@tomstiel7576
@tomstiel7576 Жыл бұрын
if you think that's genius,,,you need to get out more
@ArticulateArena
@ArticulateArena Жыл бұрын
Those 2 screws holding everyones life together
@erikw113
@erikw113 Жыл бұрын
That’s not structural
@fredricksoncausey9772
@fredricksoncausey9772 Жыл бұрын
Keep it up with tricks..learning from you every time
@Woodmaker99
@Woodmaker99 11 ай бұрын
Good ideas 💡
@mrs_white_crow
@mrs_white_crow Жыл бұрын
Я не уверена, что брус не треснет в месте саморезов, при таком натяжении...
@ricker963
@ricker963 Жыл бұрын
Maybe joists and decking will help?
@АлександрГергерт-е8н
@АлександрГергерт-е8н Жыл бұрын
Мало вероятно, что треснет. Древесина дуб достаточно прочная. Жалко что так ее используют. Тут и сосной бы обошлись...
@Mamaiika71
@Mamaiika71 Жыл бұрын
Длиной саморезов можно решить конечно, но чтобы не напрягать древесину, я бы МШУ, 125 мм, с лепестковым кругом, потом вибро шлиф машинкой. Наверно вывел бы
@claudioalves2178
@claudioalves2178 Жыл бұрын
A peça de madeira 🪵 (prancha) é flexível 💪🏽 e logo se adaptará com umidade e calor (se for o caso…🤷🏻‍♂️🪓🪚…!!)
@user-pe4kq6xi6b3
@user-pe4kq6xi6b3 Жыл бұрын
​@@АлександрГергерт-е8н сам ты... ДУБ😂😂😂
@СергейДемичев-э3н
@СергейДемичев-э3н Жыл бұрын
Здорово очень придумано
@Tips_Workshop
@Tips_Workshop Жыл бұрын
Благодарю 👋🤝 ❤️
@Вероника-м2ц1р
@Вероника-м2ц1р Жыл бұрын
Я всегда одной рукой прижимаю а второй кручу
@jasonprittie
@jasonprittie Жыл бұрын
Those screws at interior drywall screws they’ll break in six months outside
@tedofuentes6525
@tedofuentes6525 Жыл бұрын
Drywall screws don't have a shank. Nice try though
@micc4044
@micc4044 Жыл бұрын
They won't break but they will rust out ovr 30 to 40 years
@EdvardRickard
@EdvardRickard Жыл бұрын
​@@tedofuentes6525, course drywall screws have a shank.
@tedofuentes6525
@tedofuentes6525 Жыл бұрын
​@keithreckord4788 theyre just phosphate covered wood screws. Drywall screws come in 1 1/4 inch for 1/2and 5/ 8th drywall. and 1 5/8, and 2 inch screws are for double layer half and 5/8th, respectively. Anything larger is just a phoshate covered wood screw
@richt5986
@richt5986 Жыл бұрын
those screws will out live you
@mayasonmez7757
@mayasonmez7757 8 ай бұрын
Mantik !? Bravo!
@markbailey286
@markbailey286 Жыл бұрын
There could be only one thing worse, if he was to hammer the screws in. Please, the appropriate screw for the application!
@miguelangelperez7509
@miguelangelperez7509 Жыл бұрын
¡Los tornillos NO se clavan, se atornillan!
@marti220
@marti220 Жыл бұрын
@@miguelangelperez7509 you’ve misunderstood. He said the only thing WORSE would be IF he had driven the screws with a hammer. He didn’t mean that’s the way it’s done
@AlexeyProMontage
@AlexeyProMontage Жыл бұрын
Полезные советы с деревом-на строй площадке запрещено использование калёных шурупов
@ПетрФёдоров-э4ь
@ПетрФёдоров-э4ь Жыл бұрын
Два навеса собраны на 'каленых шурупах',черных саморезах. За 6 и 5 лет ничего нигде не лопнуло,не повело и не перекосило- зимой на них снеговые нагрузки. Ещё раньше на чорных саморезах была собрана угловая полка под тяжёлый телевизор,и всё в порядке,пока его не заменили на панель. Вообще много их было закручено- за всю жизнь их лопнувших припомню штук 5,длинные без сверления.Проблем не создало. ....может,вы все на них дубовые шпалы собираете?...
@AzuTerta
@AzuTerta Жыл бұрын
Похуй, не себе
@ВалерийКузнецов-у7ь
@ВалерийКузнецов-у7ь Жыл бұрын
Кем и почему???
@Доктор_Вальц
@Доктор_Вальц Жыл бұрын
Приблизительно так я собирао шкаф производства г. Пенза модель ШК603М! Мои родители за всю жизнь ни разу не сквернословили! Со сборкой мебели и наполнением от Икеа не было проблем! Но тут я вспомнил детство и юность! У меня выросло несколько астральных рук, ног, крылев и мощных хвостов! Так-то я даже Шкафы Бэста от икеи усовершенствовал в части крепежа к стене! Но тут люди лет 50 лепят унылый товар, ни инструкций, ни сверловки, ни фрезовки! Как врагам! 😂😂😂 Я потом напишу писульку, этим пенсюкам пензюкам! 😂😂😂 Ребята! Порой простые решения приходят на ум легко! Просто надо дать врем им появится в голове! Всем удачи! ❤❤❤
@mairamonzani7360
@mairamonzani7360 Жыл бұрын
Amei seu comentário, só deixar a cabeça esfriar !!!
@igorziyaev490
@igorziyaev490 Жыл бұрын
Шкафы Икея, стоят крепко в собанном виде только прикрученные к стене. Попробуйте их переставить, и вы поймёте, что шкаф Икея развалился от небольшого передвижения в собранном виде. Дерьмошкаф Икея, это отстой. 😁😁😁
@TEPO--
@TEPO-- 7 ай бұрын
Love it❗
@Tips_Workshop
@Tips_Workshop 7 ай бұрын
Glad you liked it 👍👋❤️❤️❤️
@ЛиЮэ-х6я
@ЛиЮэ-х6я Жыл бұрын
Но гвозди прочнее, чем винты. Есть конечно массивные винты не уступающие по прочности гвоздям.Все нужно смотреть на месте. Если временное сооружение, то на шурупах конечно лучше, открутил их без проблем, а с гвоздями нужно потрудиться. Короче, гвозди забывать нельзя, они твои лучшие друзья, шурупы прикалены и могут отломиться, а гвоздь никогда. Это нужно помнить всегда.
@Rozhdenie_kolpachka
@Rozhdenie_kolpachka Жыл бұрын
Ничего подобного.гвозди по мере высыхания дерева будут гулять.а тут все намертво.еще и подтянуть можно
@Ольгавойкова-й4п
@Ольгавойкова-й4п Жыл бұрын
Нет ничего лучше, чем шурупы завернутые молотком и гвозди забитые шуруповертом😂😂😂
@LeeNichols-b1y
@LeeNichols-b1y Жыл бұрын
Screw heads will pop off. Dry wall screws are for DRY WALLS.
@siwa7160
@siwa7160 Жыл бұрын
They're not dry wall screws 😊
@jonwallace7015
@jonwallace7015 Жыл бұрын
​@@siwa7160these people commenting don't know shit about anything
@thomashicks1565
@thomashicks1565 Жыл бұрын
Chances are they are BLACK EXTERIOR screws!! DA!
@mattb5734
@mattb5734 Жыл бұрын
Long ass drywall screws you use buddy
@Wornout1
@Wornout1 Жыл бұрын
It's the principle that we are shown.
@TolisDokianos
@TolisDokianos Жыл бұрын
Immensely satisfying! 😊
@PiXBY.STOPMOTION
@PiXBY.STOPMOTION Жыл бұрын
Next time, replace the "tool" with your hand and push it. XD
@johnrobertson7583
@johnrobertson7583 Жыл бұрын
I will bet you would have used a handsaw to cut the boards and run the screws in by hand too…what a man! Probably mixed the mortar for the blocks in a pan with a hoe too…
@ioej2782
@ioej2782 Жыл бұрын
​@@johnrobertson7583, oh man, u never touch drill or other tools, is not it?)
@PiXBY.STOPMOTION
@PiXBY.STOPMOTION Жыл бұрын
@@johnrobertson7583 wtf, he pushed the board with his thumbs?! So why using a tool to push?! Useless workpart..
@BeefPapa
@BeefPapa Жыл бұрын
*OSHA:* 👁️ 👄 👁️
@teshpatel5034
@teshpatel5034 Жыл бұрын
​@@PiXBY.STOPMOTION with 2 people it might work, but if you are by yourself, it's easier to hold it in place with minimal force and drill it straight.
@chozarchozar1786
@chozarchozar1786 Жыл бұрын
Только саморезы другие надо. Эти калёные ломаются со временем, особенно под давлением как здесь.😅
@ВалерийЦымбалов-г4э
@ВалерийЦымбалов-г4э Жыл бұрын
Только гвоздь.
@vlad.cutuzow
@vlad.cutuzow Жыл бұрын
дерево со временем привыкнет, а шурупу ничего не будет..
@TheNyhm1
@TheNyhm1 Жыл бұрын
Why are you using drywall screws for an exterior application
@isaacmai7961
@isaacmai7961 Жыл бұрын
Prolly cause he doesn’t want to waste good screws on like a demo? Idk still kinda weird but I can sort of get it.
@Nameentered
@Nameentered Жыл бұрын
Doesn't even matter about the interior or exterior. It's the fact that it has no structural integrity
@Nameentered
@Nameentered Жыл бұрын
​@isaacmai7961 but it's not just a demo. Plus, even if it was a demo, he could take the screws out and save them for later. And people on the internet will take things as they see them. So, if they see he used those screws, then they will use those screws as well.
@isaacmai7961
@isaacmai7961 Жыл бұрын
@@Nameentered Not really bro. The screws will be worn in some way, even just slightly, by screwing and unscrewing them. And if the people on the internet don’t know how to do this, I will also bet that they couldn’t differentiate between different types of screws anyways.
@LeaveItToTheWolves
@LeaveItToTheWolves Жыл бұрын
The only drywall screw that was used was the one that he put in for leverage and took out. The other two are screws for structural purpose.
@nirmal6632
@nirmal6632 10 ай бұрын
So satisfying
@tollie_zuiger2074
@tollie_zuiger2074 Жыл бұрын
A worker with his whole life experience would laugh at this
@romeomusciac2508
@romeomusciac2508 Жыл бұрын
Nu ar răde că e bine
@L.K.B2007
@L.K.B2007 Жыл бұрын
I can’t take anyone seriously who uses drywall screws like that
@gcarraig
@gcarraig Жыл бұрын
…or placing a screw into the end of a 2x4.
@themrnonickname
@themrnonickname Жыл бұрын
I'm always surprised whenever I see the lack of strength framers have.
@fernandomoralesescobar9465
@fernandomoralesescobar9465 Жыл бұрын
Excellent...
@뉴스는즐거워
@뉴스는즐거워 Жыл бұрын
이렇게 나무가 휜 상태에서 이렇게 대충 박으면... 나중에 나사가 헐거워지면서 나무가 들뜨는 현상이 생기는거 아닌가?
@925a
@925a 11 ай бұрын
돈 받았고 내 집 아닌데요
@GyoungBoMoon
@GyoungBoMoon 10 ай бұрын
​@@925a역시 대한민국 근로자 마인드
@derfderfson
@derfderfson Жыл бұрын
My dad had one of these axes and one day one of those hinges flew right off and hit me in the the eye when he was trying to bash my skull in. Him and I still laugh about it every day. RIP Dad. Edit: I managed to post this on the wrong video but F it, I'm leaving it.
@rubenchacko3444
@rubenchacko3444 Жыл бұрын
your dad sounds like a role model.. rip legend
@RazanaArcclaw
@RazanaArcclaw Жыл бұрын
Axe?
@no-name168
@no-name168 Жыл бұрын
"Him and I still laugh about it every day. RIP Dad. " bruh
@fcockroach
@fcockroach Жыл бұрын
​@@RazanaArcclaw Daddy Axe
@ivanboesky1520
@ivanboesky1520 Жыл бұрын
Loser 😀
@mekalarambaburambabu3981
@mekalarambaburambabu3981 Жыл бұрын
*tymczasem celebryci kupujacy lajki na Realfollow*
@JanetJones-y2z
@JanetJones-y2z Жыл бұрын
Very smart solution!
@Duck_side
@Duck_side Жыл бұрын
Now you have a dirty hole in your timber face, and drywall screws that will snap in a couple of months
@ImALefty08
@ImALefty08 Жыл бұрын
He didn't use drywall screws to fasten the wood together. Watch it again.
@craigbuckley38
@craigbuckley38 Жыл бұрын
It's just a demonstration
@heathbruce9928
@heathbruce9928 Жыл бұрын
Screws aside, my friend Mike showed me this. Has come in handy many times.
@waldowaggins
@waldowaggins Жыл бұрын
I just use my knee.
@СергейКлементьев-ф5м
@СергейКлементьев-ф5м Жыл бұрын
Шуруп в торец не держит
@romaledilov3159
@romaledilov3159 Жыл бұрын
Rrhu
@zaratgreen2095
@zaratgreen2095 2 ай бұрын
Great tip! Thanks.
@andndmmcmnf1321
@andndmmcmnf1321 Жыл бұрын
Two 45 degree angles would look better in my opinion
@BASED.88
@BASED.88 Жыл бұрын
Better hold *I misread. Better hold if you put the screws through at a 45
@ГалинаАзанова-я9п
@ГалинаАзанова-я9п Жыл бұрын
Так крепление лучше.
@guybartlett9587
@guybartlett9587 Жыл бұрын
Better not having your opinion
@nathanielracine
@nathanielracine Жыл бұрын
Drywall screws...
@mirhasanqadrimirhasanqadri4346
@mirhasanqadrimirhasanqadri4346 Жыл бұрын
mnostwo ludzi pisze o tym realfollow , ale przeciez nie ma nigdy pewnosci kto kupuje w takich sklepach a kto nie XD wiec ocb?
@kathrynmerrick977
@kathrynmerrick977 Жыл бұрын
Clever, kudos! 👏 😊
@Tips_Workshop
@Tips_Workshop Жыл бұрын
👋🤝❤️
@jonnyniemela6693
@jonnyniemela6693 Жыл бұрын
Så tillfredsställande och proffsigt 💪😎👍
@2000Bremi
@2000Bremi 11 ай бұрын
Wow 😮❤😊
@anandhuanandhu7407
@anandhuanandhu7407 Жыл бұрын
Great job💯
@Its_a_kind_of_magic71
@Its_a_kind_of_magic71 9 ай бұрын
Amazing 😮😮❤❤❤❤
@Tips_Workshop
@Tips_Workshop 9 ай бұрын
Thanks my friend 👋🤝 I'm glad you liked it 👍❤️❤️❤️
@patriciajones4465
@patriciajones4465 Жыл бұрын
That is ingenious! Work smarter not harder. Thanks for the tip!
@antetutic3600
@antetutic3600 7 ай бұрын
Super Technik 👍😊
@Tips_Workshop
@Tips_Workshop 7 ай бұрын
Thanks my friend 🤝 Glad you liked it 👍❤️
Best Fails of the Week | Unhinged and Cringy 😆
19:21
FailArmy
Рет қаралды 424 М.
BOMBSHELL: Shocking update on Epstein prison video
8:49
Brian Tyler Cohen
Рет қаралды 1 МЛН
ЗАЧЕМ НЕРВНИЧАТЬ?? #shorts
00:18
Паша Осадчий
Рет қаралды 4,3 МЛН
What's The Sharpest homemade Katana?
01:32
Mini Katana
Рет қаралды 37 МЛН
Lose 100 LBs, Win $250,000!
36:50
MrBeast
Рет қаралды 166 МЛН
Глент пранканул Риви
00:10
ЛогикЛаб #2
Рет қаралды 679 М.
World's Fastest Car Vs Cheetah!
20:37
MrBeast
Рет қаралды 92 МЛН
How to Easily Drill Holes in Glass - a DIY Tutorial
4:54
DLArtGlassSupply
Рет қаралды 2,9 М.
De Meest Emotionele Momenten In Voetbal...
12:22
90MinutenVoetbal
Рет қаралды 30 М.
Sanson Ki Mala Pe (Slowed & Reverb)
4:47
Malik Tayyab Official - Topic
Рет қаралды 94 М.
I'M GOING TO MAKE CLOTHES FOR MY LABUBU + UNBOXING!
19:04
CreaChick
Рет қаралды 242 М.
Dil De Diya Hain (slowed Reverb) - The Perfect Song For A Broken Heart
7:17
ЗАЧЕМ НЕРВНИЧАТЬ?? #shorts
00:18
Паша Осадчий
Рет қаралды 4,3 МЛН