Tire Stickers: Install Permanent Tire Letters: Michelin Tire Lettering

[@MrGolddenboy]

I remember when I was a teenager Goodyear Firestone BFGoodrich all the big tire companies did that to there tire.they came with a white wall or white lettering that's how they were purchase .I t's sad to see that customers have to buy aftermarket products to make your tires look better it should be up to the tire company to offer that as an option my opinion anyways

[@dennisf5774]

Then every tire would have it and people would probably black it out to make it more unique

[@TheSwissCheese87]

@@dennisf5774 the white lettering typically only came on one side.

[@azzcoopz3270]

cruton87 yeah white lettering on one side so you can choose when fitting them if you want it showing, only problem is a lot of tyres are sided or rotational now

[@spaomalley]

their*

[@SunSailandSand]

@@spaomalley +1 SJW point, yayy for you

[@M6_Paki]

These will give you 10+whp gains.

[@M6_Paki]

An urban explorer you know it!

[@1slowe60_9]

Wow ima get them forsure now!

[@KennyLauderdale]

Lol

[@brandonp.7514]

My nigga

[@atx-cvpi_99]

LOL

[@ybcurlyheaded2]

I just finished mine; they look great-and so I have a few tips: 1)-when they say you’ll run out of adhesive/AND if you have allot of stickers-make sure to conserve adhesive; there’s allot of trouble spots to touch up and you’ll need that extra adhesive, also 2)-when they say apply pressure for 30 seconds; I think they meant 30 minutes??? Bottom line is: rubber cement is messy and doesn’t set fast like crazy glue-after pressure for 30 seconds everything like pulls away; I recommend fashioning clamps to apply pressure and clamping for thirty minutes at least-(I used shoelaces and small paperback books, and tied them down to apply even pressure for 30 minutes at least. Lastly: this is a very messy job for the average handyman; people who have experience with crafts and rubber cement might do a better and/or great job; but otherwise prepare yourself for daylong-(take your time) messy rubber cement work, use clamps, and conserve your adhesive-you’ll need it for any trouble spots

[@moparchallenger749]

Tnx man Putting mine on tomorrow 😎

[@willduke32]

Thank you! That advice will save breakables around me.

[@aclassact5567]

@Digby Dooright just rotate your tires and you'll be fine!

[@r32vw86]

Too much efford for white writing on tyres IMO

[@arizonacolour8793]

@@willduke32 😂😂😂

[@lf3566]

I've put tire lettering on many tires and I'll share some tips to help some of you out... 1) buy an extra tube of gorilla super glue cause you will run out. 2) make sure to cover ALL the edges with glue 3) tire lettering will last a lot longer and stay looking a lot nicer if you position lettering closer to rim rather then towards the top of the tire. 4) never put tire shine on tires cause it will stain the lettering.

[@leighcatterall9616]

Can gorilla glue do the whole job?

[@lf3566]

@@leighcatterall9616 no don't use gorilla glue. I tried it once and the letters came loose. Use the glue that comes with the letters, it works best. Super glue works pretty good also

[@leighcatterall9616]

@@lf3566 i didnt get the glue with the patches, ive tried useing a bicycle cement but i didnt prep correctly and its not stuck hardly at all

[@lf3566]

@@leighcatterall9616 reclean it all and use superglue. I've used superglue and it works pretty good

[@SoWellsLove]

I've found that it's best to install the letters OFF CAR! The pressure application is best with body weight gravity. I've applied them on-car, elevated, and at ground level. Applying on-car is possible, but it definitely takes more time to apply even spacing across the tire. Trust me, off car, clean REALLY GOOD, cut off the rubber tire nips making sure to start with a smooth surface, use THEIR ADHESIVE, (creating an outline then filling the inners, not using too much) apply to the tire and lean into your press (hold for 30 seconds), and continue application. I've done this about a dozen times now, including removal and reapplication. After a few applications, you'll get the swing of it. 😉

[@lewisturner7355]

@sowellslove I’m currently installing mine. It is taking a ridiculous amount of time to clean them. I have a rag and acetone and I’ve probably scrubbed a section 30 times. The dirt is endless, the rage never comes up clean. These are new tires, only driven with them about 3-4 weeks. Do really need to keep going until the rag wipes clean?

[@lewisturner7355]

I washed with a pressure washer and tire/rim cleaner prior to the acetone/rag. I get that the cleaner they are the better but is there a way to speed this up?

[@RAWRIMAP4NDA]

Does the machine used to install the tires mess up the lettering?

[@jayboogie7956]

Wish I could just buy tires WITH custom lettering already on them 😞....

[@oni-stormgaming6224]

You can but crazy expensive just look it up

[@angelzuniga5499]

Yea the ones ppl put fall out

[@aaronsims604]

Say less

[@brofessormex]

Takes all the fun out if it

[@Aaron-fb6mb]

They offer installation but it’s $200 and I’m like man I wish I was rich enough to blow $200 purely out of laziness

[@garyparker390]

This is a thorough and well explained video.Any decal work large or small can be a kick in the head sometimes and a video like this shows proper technique and patience.I’m ready to apply a black NISSAN decal over top of original raised letters grayish white decal on a 94 d21 and I wish you could walk me through that.Guy at the shop wants 25.00 to due it and I know it’s not a lot but 6 letters on a tailgate should be done by the truck owner lol. Great

[@corysilvernagel4215]

I ordered a set on tire stickers from these guys and they worked great, they were for a semi. about a day after installing them they are coming off left and right..... too much tire flex? we cleaned these tires like our life depended on it and the install was exactly how you did it? different glue? its also about 15 degrees here, do they get brittle in the cold? help me put here

[@rdsjankee8532]

Sanding down the rubber to have an even finish, then cleaning the surface will help a lot. But we need to keep in mind how strong the sidewall of the tires are. For example I have both Federal 595 Super Steel Tires and Pirelli P Zero Run Flat. On the Federal 595 the letters came off after a few months. And on the Pirelli P Zero Run Flats they holding on just minor discoloration due to tire shiners but u can revive it with the tire markers. Also i have tried many adhesives. Such as rubber cement crazy glue gel, rubber adhesives, gorila glue gel, locktite super weld gel, and I will try contact cement now. Too see wich one holds the most. But in emphasis the stronger the your tire sidewall the more they will last.

[@thymetalist]

So, what was the best glue ?

[@alexchacon3129]

Lovin the simplicity of installation

[@104blockboyz702]

Use a clear coat spray with uv protection to prevent discoloring before installing

[@josemartinez201174]

Any scuffing needed before applying clear? Does it peal off over time or does it stay looking good?

[@KennyLauderdale]

Which? I just got my stickers

[@810goodfella8]

Are u saying clearcoat the letters? Or the tires before applying??

[@104blockboyz702]

Clearcoat letters after they been glued to the tires, non yellowing clear

[@TheDuke085]

@@104blockboyz702 wouldn't clearcoat crack when the tire flexes

[@b96kid]

acetone and brake kleen are great for cleaning stuff but not on a tire. they take off the oil in and on the surface of the tire which the manufacturer put to prevent cracking to the sidewalls.

[@donedoda791]

b96kid maybe just on area u are applying is what he means to do/say and then I would assume conservative amounts....☺

[@DjJtown]

That's correct. Unlike other vids I've seen, it's local cleaning affecting the application site only. DO NOT use the strongest cleaner either. You want to remove the oils slowly where you're scrubbing from only. The embedded oil in the tire is added in the production of the tire to prevent premature aging from UV and road salts due to dry rotting. If you want to be even more select where the cleaner goes, mask off around the letters with duct tape. Once the lettering is applied, the tape can be pulled off and GooGone can be used to remove the tape residue without effecting the lettering.

[@ts863]

Thanks for your feedback, though slightly inaccurate. The acetone will clean off the surface oil to assist with the bonding of the rubber decals. This is a standard practice in the industry, used by the tire companies and retreaders themselves. Yes, if you soak a tire in acetone that is bad for the tire, but a simply rag and prep will not cause any damage to the tire.

[@phenixsport]

Just finished installing on my Vette. Love it.

[@hectorortega9131]

How are they Holding up So Far? Any conplaints to know about? Thank you..

[@phenixsport]

@@hectorortega9131 I've had to add glue to multiple letters. I lost 2 of them. Ended having to purchase an extra one just to replace any missing letters. I enjoy the look, but there is some maintenance.

[@alexlazos6445]

You do need to sand down the tires a little before installing the letters ??

[@DjJtown]

A simple but obviously overlooked question: Is it better to apply stickers Before of after mounting tire?

[@Tirestickers]

It is probably easier to apply before mounting. The most important thing is to make sure it is cleaned really well prior to application.

[@ts863]

Doesn't matter, the product can withstand mounting and balancing or you can apply to tires already on the vehicle.

[@donsonbr]

@@ts863 BULL sorry this is not true the weight of the vehicle and the pressure rip the sticker off the tire I have tried everything and this product it crap. It last about a week and then starts to come up...I wish it was permanent

[@elliotthernandez6292]

Can u do yellow tire stickers nitto nt555

[@vwaudiwelder]

What about grinding the rubber surface smooth before adhesive and application as I have read in other instructions?

[@PedarabbitMlk]

Do you guys sell them like that

[@AutoBodyEverything]

Why doesn’t the kit suggest scuffing the areas prepped for sticker/glue application as it is done when patching a bicycle tube?

[@thezod2307]

Two things not mentioned here that ive seen threadwear stickers recommend is light sanding of the area you plan on placing the sticker on with like 120 grit paper and removing the rubber stubbled by hand in the same area. Not sure why these instructions dont mention that, since it kind of makes sense?

[@vBadVxbes]

Quick question will adding tire sticker void your tire warranty?

[@its.Andy1]

I just got my Toyo Proxes last night and it didn’t come with gloves🤔 lol no big deal though.

[@newyorkboss6124]

They make u buy ur own gloves 😆😆🤣🤣

[@MasonGaming476]

Well home boy, u get wat chu pay..

[@mariotorres705]

Was it easy to install ?

[@its.Andy1]

mario torres very easy. The most important part is cleaning the tires before installing.

[@malcgraham.vintagecomputer1876]

hey is this glue the same as the solution for Patching a tire? It use to be called vulcanising Fluid?

[@rockafellaash2183]

What glue can one use for tyre stickers

[@jeru333]

Can I spray wet tire shine foam on to the letter as I fo my tire

[@Tirestickers]

Only water based ones are safe. Very soon we are coming out with our own tire shine so hold tight!

[@Tirestickers]

And here it is! www.tirestickers.com/shop/hydroshine/

[@juliarceyax4212]

is this glue good cuz i tried alot they all suck except maybe 2

[@anthonyk11]

Can you do Goodyear wrangler sr-a 114s 275/60R20 ??

[@Tirestickers]

go here: www.tirestickers.com/shop/custom-design/ and enter Goodyear for the font type. We recommend anywhere from 1.5" to 2.5" for the text size depending your taste!

[@R-Mc]

I live in Wisconsin sure wish I knew place that does permanent stickers

[@djdannybhtx]

If we buy new tires, can we put these on first before they put the new tires on the rims or will that mess the letters up?

[@KillroyX99]

Tire Sticker Review: Cleaning the tire until the rag is clean is very tedious. Make sure you cut off the "whiskers" that are part of the tire molding process. Be prepared to spend a lot of time on this. I would allow the glue to set overnight before driving. I waited 2 hours, but after driving a lot of letters peeled off. Edge sealing is the worst part. It takes a long time I jacked up the car in order to spin the tires to get the glue to flow by gravity. I question the glue is the best type since I had problems. It seems more like super glue. I thought it would be good to use

[@dylanspaceman214]

Do the letters match the lettering imprinted on the tyre, I want to get these for my motorcycle, Michelin road 5 tyres

[@RickJames12398]

I specifically ordered yellow stickers from you guys today so that if i do use tire spray it hopefully wouldn't discolor too much, will that be much of a problem you think?

[@thelovablekrystal8032]

Did you have to sand down the letters on tire?

[@GeneratieX01]

At what speed is the text stady so others can reed? Thanks for your response.

[@rayseidel7567]

How do they hold up With car washes and tires cleaners?

[@maxmenlow4848]

Would i be able to apply tire shine to my tires after applying decals or would that interfere with them? Would i have to do it in a special manner and go around the lettering? Thanks.

[@Tirestickers]

We have a special tirestickers safe tire shine for that purpose. www.tirestickers.com/shop/hydroshine/

[@atx-cvpi_99]

I don't recommend tire shine because it'll shorten the life of the tire.

[@sideriu86]

What glue do you use?

[@journeyreuma6990]

Do I need to put clear coat on the lettering?

[@bossmoneystreet3589]

Do y'all have it in CHEVY or Chevrolet

[@ervintaylor6508]

I need permanent stickers for Cooper road and trail AT 235/75r15 not near the tires at the moment so not sure what lettering size is on them?

[@MrM4rvelous]

Can tire shine be applied to the tire after these are done at set? Like days later?

[@Karopine]

Would these rub off on a drive thru car wash?

[@UnburdenedByWhatHasBeen]

Whats required? I didn't catch that.. what happens if i add to much adhesive? I missed that too

[@stopitskiiiuuup4006]

MANNN WHAT GLOVES ARE YOU USING BECAUSE THAT ACETONE ATE STRAIGHT THROUGH MY GLOVES!!!

[@AtBroCrib]

can you put the lettering over the existing lettering on the tire, even if the lettering isn't the same?

[@Tirestickers]

Yes you can. Many people do it that way. We also do perfect letter match where you take an etching of the tire so we can make the words fit it exactly.

[@lsombra1970]

Can these be installed on tires on car ?

[@dmcharley64]

Any chance you can make Dunlop D401 along with Harley-Davidson?

[@jayjaybatangfrisco362]

Is washing the tires beforehand and use acetone after the tires are completely dry necessary?

[@jayjaybatangfrisco362]

Because as I am cleaning the tire with acetone, I feel like it would take a gallon of acetone before I can actually clean it thoroughly.

[@Tirestickers]

the washing doesn't take off the grease that would prevent the stickers from adhering

[@oni-stormgaming6224]

So how long before they dry and I can mount rims and tires??

[@causajaya-stickerdecal7392]

what the materials to use on this video? vinyl sticker? or what? it seen so rubber and matt surfice

[@sabby559]

Who can I take these to, to install them? Any mechanic? I don’t want to do them myself

[@anibalcarranza3548]

Do I need to do a tire rotation & wheel alignment after adding the stickers?

[@Tirestickers]

No the weight of the stickers is negligible

[@shanelgriffin1679]

This was a real question?? 😫

[@timothythegreat6294]

I made stencils and use high grade enamel spray paint to avoid balance issues .....also the enamel resists tire shine as well so yeee ha!

[@jorgediazdelrio9880]

Do you need a new tune after installation?

[@imOJOmran]

I can see this very overpriced in amazon, is that price for the kit which includes 4 tires? Or only 1 tire decal?

[@Tirestickers]

I don't know what kit you are looking at. All kits come with 4 or 8 decals, adhesive and gloves. They are a rubber based formula that lasts the life of the tires so they are an investment for a quality product.

[@19ADAM80]

Tire Stickers Will tire shine discolor them, or anything? I don’t want to have to buy a special kind of tire shine just for that because I got through it of it.

[@Tirestickers]

@@19ADAM80 We have our own specially formatted shine that will not damage the stickers. We do not recommend using another brand as we do not know what is in them and they could potentially stain them www.tirestickers.com/shop/hydroshine/

[@OrangeSpeedTV]

Are these removable afterward? I’ve had my nitto lettering on for about a year now and they are quite brown. I am thinking of removing them if I can’t get them cleaned.

[@Tirestickers]

Hey! We sell a cleaner that is safe for the stickers just for that purpose www.tirestickers.com/shop/cleaner/

[@ts863]

Yes, removable without damage to the tire.

[@remyche8768]

I use a hard brusseled brush and soapy water

[@oaktown7509]

So can I still use tire shine? Another question is do you suggest that when a letter is lifting to just glue under or glue the edges as a seal

[@stevel2407]

So the adhesive is CA and the cleaner is isopropyl alcohol?

[@Tirestickers]

The adhesive is a special formula we have made specifically for our stickers. In terms of a tire sticker safe cleaner, we also have our own one that we can guarantee will not harm the sticker, anything else you try to use we cannot promise won't damage the sticker.

[@ts863]

In simple terms yes, but the adhesive is not a standard 'super glue'. Using any off the shelf adhesive will ruin your tires and the product will not bond, this adhesive is custom developed. For prep of the tire, use acetone and our Touch Up cleaner is a custom cleaner that will not damage the rubber over time.

[@andypacmanperez]

@4:20 use a clean rag Picks up the dirtiest rag I've ever seen 😳

[@lifeintheam7603]

🤣

[@newyork819]

Enlighten us on the white wall with the black lettering in the background. If I'm interested, I am confident I'm not alone. Thanks.

[@Tirestickers]

Hey- if you have any questions about specific products you can email the team at [e-mail]

[@justinkyle5025]

Can i get this for 26" bicycle tires? 🤔

[@jeffreygalle]

You guys got these for Douglas All Seasons right?

[@Tirestickers]

We can do stickers for any tire!

[@nedeljkovuletic3134]

@@Tirestickers Hi there what prizes you got guys usualy are realy $$$ what is your prize for it...thanks

[@duke792]

So you’ll have the white letter Branding and the actual tire Branding? Which leaves 2 different names on the tire…

[@johnthegodfatherslack]

Will they come off when the tyre is fitted to a wheel ????

[@stewvlogs5084]

I love these. They really transform the look of the car. I want some for my S550 Mustang. Ford Performance would look good. 👍

[@Tirestickers]

That would look awesome!

[@Spiritcr1jsher]

I have a white 50th anniversary and am trying to decide if I can make the letters white myself . Just nervous about tire dressing making them look dirty

[@Tirestickers]

@@Spiritcr1jsher we have a special tire letter cleaner so if they start to get dirty you can always restore them to white again

[@Spiritcr1jsher]

@@Tirestickers will the letter cleaner remove tire dressing?

[@MrYammizz]

messed up on the very 1st word all 7 other words on other tires are perfect...how would I remove it to re apply or is it lost forever its just a mess got dried up glue behind it and couple letters are raised just won't take more glue

[@bazookajoe3290]

How long til I can go thru a car wash after adding the letters?

[@flba2845]

Where can I get the adhesive in europe?

[@curtisdickson6277]

I have went through a whole can of brake cleaner and half o bottle of acetone on just 2 tires and black still coming off. The guy in the video says that it will take 10 or more passes to clean prep wheels. Well he is right because I think I'm on about 70 passes each decal

[@enriquethegreat7847]

Your no longer removing dirt and oil from the tire at that point. There is a compound in the rubber called antiozonant. That will never stop coming off. How are your stickers holding up?

[@curtisdickson6277]

@@enriquethegreat7847 they are holding up great so far. Car looks awesome

[@StickerBao]

Nice Video.

[@ithanhunt3250]

*what is the name of the glue ?*

[@SantaWithaViolin]

Can this be done without removing the tires? (tires are vertical)

[@SevynDaWriter]

That’s what I want to know

[@planetscott1]

Are you saying too much adhesive will ooze out the side?

[@Tirestickers]

yes if you apply too much

[@Schizmjr]

I had a lot of edge lift next day... Now that the adhesive is dry, what's the best way to adhere all the lifted edges?

[@MrM4rvelous]

Did you let it sit for 3-4 hours after application?

[@Schizmjr]

@@MrM4rvelous absolutely. Edge lift was next day. My assumption was the tires were not cleaned enough before applying. I cleaned behind the lifting edges some more with acetone and then added a little more adhesive... that did the trick.

[@MrM4rvelous]

@@Schizmjr thanks. Since then it's been good? I'm gonna try and get these on today. Are you able to put tire shine on after

[@Schizmjr]

@@MrM4rvelous yeah, no worries since then and they still look good. I have used spray on and leave on tire shine twice with no issues. Keeping them bright white I've used the little bottle of cleaner that came with the kit. That seems to work best. Good luck! I love the look, I'm sure you will too!

[@MrM4rvelous]

@@Schizmjr thank you so much. I only got the top though so I hope it doesn't look weird

[@CCFONESOL]

I can find nothing for Pirelli MT66 Route tires.

[@bobbyguns100]

which kit are you using here? is this the raised tire sticker or ?

[@choubakablackscars1664]

Bjr quel colle prenez vous svp

[@elliotthernandez5267]

I bought 8 sets of Goodyear tires stickers can I use a tire stickers glue for all 8 sets the glue is small ?

[@Tirestickers]

Yes, you are only supposed to use a very small amount on each tire. Each kit comes with enough glue to complete the installation.

[@elliotthernandez5267]

Ok thanks

[@barryhowell8992]

For being a "professional" this guy didn't line the decal up straight at all. This isn't like applying trim tape to a window before painting, but that's how he did it. Totally screwed up the alignment. You have to ROLL any decal onto the surface like you're "peeling it off" but in reverse, to prevent air bubbles and wrinkles from forming. You don't adhere the ENDS first, you start in the middle and work OUT. I've installed decals on the rear windows of my SUV for all the audio equipment I've installed, not a single bubble or wrinkle and I didn't need a squeegee.

[@jackiejoy7276]

Does anybody else remember the good old days when you bought tires from a place and they would put them on your car for the price of the tires and dispose of your old tires for free what the hell happened to those good old days now I buy a tire for $150 then they want another 40 to put the tire on my rim then they want to sell me a $10 valve stem and then another $20 for Mount and balance that $150 tire just became 220 plus a government fee and disposal fee you should be able to buy tires for less than 100 bucks for four haven't put on your car and drive away what happened to those good old days

[@goodyearguy2382]

It’s gone😞

[@connorbaz5980]

@Avin Kavish not even, inflation is the real culprit.

[@paulh6591]

In the good old days the shop would toss the tires onto a massive pile and eventually the rotting pile would catch fire and smolder for weeks.

[@lengerer]

Still the Same here in Australia. Tyre shop gives you price for fitting new tyre, new valve stem, balance and disposal of old tyre.

[@Alxplr]

Does the each letter laminate come off or is it supposed to stay on?

[@UndeadFleshgod]

Wondered if you were doing custom designs like a Hellcat logo, and there's one behind. Neat!

[@Tirestickers]

You can upload any custom logo! www.tirestickers.com/shop/upload/

[@Tirestickers]

Absolutely, check out our site!

[@SINGH-ing]

Do you need to sand the tires or its not necessary?

[@KovaXofficial]

So if I’d want to install this on a Pirelli P Zero, would I use the decal over the rubber logo or would I have to sand off the rubber logo to make an even surface for the permanent sticker?

[@Tirestickers]

Pirelli is the only brand we do not sell- but we can do any other type of sticker for those tires if you want to get creative! In this instance you would sand down but for other tires we can also do tire letter matching which would fit right on top of the raised letters www.tirestickers.com/shop/tire-letter-match/

[@ts863]

You do not need to go over the existing lettering, you can apply anywhere on the tire. The rubber will conform over tire surfaces without any issue or you can remove it if you prefer.

[@gilanggaming3704]

Clean the tire with pure acetone or 50 acetone ??

[@S3lvh]

BRO DECIDE WHICH CAMERA YOU WILL LOOK AT

[@swami2727]

Do we get this in India?

[@CenobiteBeldar]

If I bought Michelin Defenders for my truck and I got stickers for them, would the stickers void my warranty? I would like to use permanent stickers.

[@Tirestickers]

That would be a question for whoever you purchased the tires from

[@jorgefacio690]

yall have a video of how to apply the whitewall stickers

[@champion1389]

Any kind of brake cleaner can prep the tire when cleaning?

[@Genjuro22]

Do you have to remove the wheel

[@Tirestickers]

No need to remove the tire or wheel from the vehicle. You can install on the car or on a new tire and then mount. Product is permanent!

[@iroc8653]

Veli O No you do not have to remove your tires from your vehicle. It's actually more than a few videos with guys installing in there driveways or garage full mount. Hope that help.

[@paullovesey4863]

Do you need to re-balance your tyres afterwards?

[@kristipton7112]

That's the most retarded question I've ever heard 😂😂😂

[@MELLtheLEGEND]

I had the temporary stickers n they do don't stick properly..

[@london6580]

Do you have to re-balance the tire after this?

[@Tirestickers]

Our Rubber Letter kits are only 0.5mm thick and also will result in a negligible weight addition, so no need to re-balance.

[@jamessalter676]

Tire Stickers 😂

[@antonandersson6706]

I just put a piece off tape on the inner side to balance it

[@charleshuggins778]

That's very versatile cool.

[@keystonedaytrip238]

Harley Davidson bikes come with Dunlop tires with "Harley - Davidson"labeling on them . If I wanted "Harley Davidson" tire stickers to overlay the factory lettering would this be do-able ? I'm not seeing a similar font on the pallet

[@Tirestickers]

Yes we can do a letter match for any tire. www.tirestickers.com/shop/tire-letter-match/

[@ClockFixer]

White outline letters?

[@willduke32]

Thank you!

[@DemopVWgarage]

Hi guys can you do a video on the 2" whitewalls decal?

[@Tirestickers]

Hey! If your having trouble installing email us at [e-mail] and we can help you out

[@ts863]

We have one coming soon!

[@ER_666_]

Do you guys make Bridgestone stickers for 295/75r22.5 semi size tire?

[@Tirestickers]

Yes. Just choose Bridgestone as your font www.tirestickers.com/shop/text-on-tires/, for that size tire email [e-mail] to consult with someone in production about the font size

[@keananconnor4221]

So rubber and rubber cement ok thanks.