Tissot PRX Battery Replacement!

[@Striker50_]

Steel Bracelet, & Watch items and batteries used on my Amazon affiliate Storefront here: www.amazon.com/shop/striker50/list/21OF83UT7HHQ0?ref_=aip_sf_list_spv_ons_mixed_d

[@vipulsethi8371]

Watching from India. People like you do the general public a lot of favour by making such videos and teaching us skills toward self sufficiency. Thanks a ton. You earned a subscriber

[@Striker50_]

Very kind words thank you for taking the time to write ✍️ that 🙏

[@SilentShadow07]

Been looking for a video on how to to change the battery on a PRX for a good while now. Since I couldn’t find a particular notch on the caseback to pry off. But with your demonstration, I now have piece of mind of not needing to send it to Tissot to replace the battery. Thanks, friend!

[@Striker50_]

Here to help! You can find Amazon caseback knives that work to open the caseback as well, but the one in the toolkits works as well, just with a little more caution so we don't scratch anything. Glad I was able to save you the hassle of having to send it in. I had a local watch repair in my city but it would be $30-$40 every time I would take a few watches to change their batteries. He also retired so I thought I'd teach myself and it's surprisingly easy and fun to do

[@MrMqwe1]

The bracelet has a quick release. Just squeeze the two pins with your fore finger and thumb and it should pop right off at the lug.

[@Striker50_]

Totally correct. Unfortunately the quick release pins are pointed inward towards the case back making it cumbersome. I myself keep my nails short and would imagine many others do as well. The tapering of the strap is ultimately what makes the pins a challenge to do with regular finger nails in my personal experience

[@EdwardOlive]

just use a little pusher tool they are 1 dollar @@Striker50_

[@gerechoppers]

Thanks. You just saved me a few bucks and more importantly the time it would have taken to go to a watch repair store to get this done.

[@Striker50_]

Hell yeah I love to hear it

[@rabbit859]

I don’t have a PRX, but I do want to say your idea to use a level as a press was brilliant. I have an old-ass armitron 20/1801 my dad got me back in the 90s, that i’ve been struggling to get the back re-seated after changing the battery. Had it back on in less than a minute after this. Great video!

[@Striker50_]

@@rabbit859 That's an amazing story to hear I'm glad this served of great use

[@superfast30]

You should have placed a thin piece of clear plastic film over the case back before prying it open to serve as a protective barrier between the tool and watch itself. There are marks along the area where you used the pry tool!

[@Striker50_]

Great point 👍 It's on the underbelly of the watch so no biggie for me since it's hidden, but Live and learn

[@jerome8035]

2:22 Tissot : Swiss made... in Hong Kong ?

[@Striker50_]

Perhaps the movement or other components

[@Pitsenberg]

Movement is swiss

[@stewarvasquez5173]

Do you know where I can get the red seal that goes on the lid, a watchmaker ruined it for me and now water gets through the lid

[@Striker50_]

@@stewarvasquez5173 I would contact Tissot support to ensure you find the OEM part

[@stewarvasquez5173]

@@Striker50_ Do you know the size of the prx 40mm gasket, it broke and I want to order it on eBay but I don't have the exact size

[@Striker50_]

@stewarvasquez5173 I wouldnt have that number available. Consider using a ruler to measure the broken one in cm and then convert to mm

[@barryspc]

Thx for the video, mine just needed a battery replacement too.

[@Striker50_]

Nice glad I could help ⌚

[@noelrimando6604]

Clear bro, thank you very much.

[@Striker50_]

Thanks for taking the time to comment 🤘

[@TomasWatchReviews]

Honk Kong on the inside :D Might as well just print Honk Kong on the dial I guess :D

[@Striker50_]

Lol so many companies are deceiving people nowadays. I guess technically it's "assembled" in Switzerland but still petty

[@TomasWatchReviews]

@@Striker50_ funny enough, on 35mm version back case is too small. So I guess that black thing covers the "Hong Kong" as I found just the numbers. Didn't take the black thing off though.

[@uzunsaclkeladam7824]

Hi How long does the Renata 371 battery last?

[@Striker50_]

Expect 2-4 years it's pretty good. I didn't have to replace it, just showed how it's done

[@NAW32Nicoisme]

How long the battery last?

[@Striker50_]

It should last at least 2-5 years. I made this video just to show how to do it. My watch is still good with the original battery

[@md.jarifmostafashahittya]

Movement model?

[@Striker50_]

I don't remember the movement tbh

[@md.jarifmostafashahittya]

I found out. It is a eta movement, don't know the model. It's swiss made.

[@Striker50_]

@@md.jarifmostafashahittya Thanks for sharing. Yes it is quite accurate so I like that

[@turkdutchyt5266]

Thank you bro!

[@Striker50_]

@@turkdutchyt5266 🙏🙏🙏🙏🙏

[@darrensmith6999]

Tissot Hong Kong i thought these were supposed to be swiss ?

[@Striker50_]

Yup movement is swiss and probably assembled in Hong Kong. I searched all marketing and couldn't find where they were made. Sneaky. Probably something like Apple where it says "designed in California"

[@locksmith9498]

First he removes the pins from the bracelet while he could have just opened one of the quick-releases at the end of the strap by hand in a seconds time. He then doesn't use a protective film to avoid scratches when prying up the case back. Secondly he uses a metal object to remove the battery. If the battery was full it would likely be short-circuited. Or it could cause an electrostatic discharge from that soft synthetic blanket underneath. Then he puts the new battery in with his fingers, inherently getting skin oil in there. Should have used finger cots or plastic gloves. Thirdly he says use something flat to press down with and shows the handle of a hammer which is anything but flat. The soft synthetic blanket that you put the watch on will probably generate a fair bit of electrostatic charge which could very well destroy electronics. He really doesn't know what he's doing. These are expensive watches, take every precaution.

[@Striker50_]

@@locksmith9498 The quick release pins are terribly designed and difficult to reattach. You must be fun at parties. 🎉

[@goantageorge8352]

why the second isn't exactly on the dots ?

[@Striker50_]

Interesting. I'm looking right now and it seems to be almost perfectly aligned with the seconds. Maybe it's the angle

[@terence.v.r]

you can quickly remove the bracelet spring bars, then why open the bracelet with the pins

[@Striker50_]

@@terence.v.r removing the bracelet is easy, adding it back is very difficult

[@НіжнийВуж]

Можно поставить ETA F06.412. ?

[@Striker50_]

??

[@EdwardOlive]

why not just take the bracelet off first its quick release

[@Striker50_]

Watch the Tissot bracelet removal video I made. It's a pain bc of a poor design

[@heikoewald88]

there is a notch, my Tissot digital has one, at 12 o´clock ....

[@Striker50_]

Unfortunately, for the PRX models like the one shown in this video, there are no notches to open the case back from

[@heikoewald88]

well, my PRX Digital has 2 notches, at 6 and 12 o´clock...

[@Striker50_]

I just researched a few digital PRXs. The design appears to be the same as the one I have. I do not believe the cutouts at the 6, and 12, are reserved for caseback opening. That design appears to be for compressing the pins on the quick release. In addition, the band tapers upward which can result in an awkward opening when trying to open the case back. If that is the way you choose to open yours by all means. 👍

[@srk555don]

My all excitement for prx crashed when I saw Hongkong....we buy swiss watches only bcoz they are swiss made

[@Striker50_]

@@srk555don I searched everywhere and couldn't find it it was made in HK, or just assembled there

[@bhogala]

you lost me at "removing the links......... The PRX literally uses a quick release bracelet that comes off in seconds.

[@Striker50_]

Sounds like you lost yourself Main point of the video is how to change the battery, which this video illustrates VERY well. P.S. the bracelet is a pain to put on and off. I would know, I have both the strap and bracelet. Taking 1 pin out is faster in my experience. There's more than 1 way to do things

[@appendix-q6k]

Kind of disappointing for this style of watch at this price point to not have a screw down case back. The only negative on this watch.

[@Striker50_]

Pros and cons honestly. Since it's not a dive watch, I don't expect too much on that aspect. I would like have seen the straps been easier to re attach however. It's a pain Thanks for taking the time to comment

[@syedmohdfasihnaqvi155]

You could have simply removed the bracelet frok that quick release pins...instead of opening the bracelet

[@Striker50_]

@@syedmohdfasihnaqvi155 The quick release bracelet is actually quite the pain to put on I don't like it whatsoever

[@maika0staretza]

Just like a 20 dollar Timex

[@Striker50_]

Pros and cons to them alllll

[@darkolazarevski4434]

Hong Kong? 😒

[@Striker50_]

@@darkolazarevski4434 That's what I said No where in the marketing or on their website could I find that it says it's made in Switzerland. But it also doesn't say anywhere that it's made an Hong Kong. However inside the watch it says Hong Kong so that's my guess

[@darkolazarevski4434]

@@Striker50_ save my 300$ Thanks!

[@Oparalf]

Du hast leider die Uhr beim Öffnen beschädigt. Man sieht ganz deutlich die Stellen, wo du den Uhrenöffner angesetzt hast. Die Batterie packt man nicht mit den Fingern an. Und ein Hammer hat nichts an einer Uhr oder Armband zu suchen.

[@Striker50_]

@@Oparalf Are you able to translate this to English?

[@Oparalf]

@@Striker50_Google translate

[@terence.v.r]

Do not touch battery with bare hands

[@Striker50_]

@@terence.v.r it'll be ok I promise 🙂