Titan 3 vinyl cutter 2015 review AMAZING!

[@accmediasolutioninc]

I know that you are the only person who has published a TITAN 3 with your iMac. You could give me some advice for the installation. Thanks to your videos, you motivated me and finally bought my TITAN 3 vinyl cutter. I could see in your videos that you can work with MAC perfectly. A thousand thanks in advance for your time and your help.

[@pollyanna163]

You can't go wrong with Roland. I bought a Stika SV-15 12 years ago and it still works everyday. It has a million miles on it and still going. I use it every day of the week. Going to buy a new one and the Roland GS-24. We need more cutters.

[@cristinasan06]

Gearing up to start my vinyl printing biz, your review on the TITAN3 was a great help. Thanks.

[@TheSkydiverphoenix]

I have been looking to upgrade my cutter for awhile now.. Your videos sold me. I just purchased a Titan 2 from US cutter.. I was going to get a 3 but hardly ever do any contour cutting... Mainly just cut sand blast mask with it.. I have had an MH721 for 4 years now and it has never broken down.. Cany wait to set it up when it gets here and try it out.. Thanks for the videos.. You are the reason I decided to get this one.. :)

[@PikesPeakGraphicsDecals]

+TheSkydiverphoenix thank you I really hope you are loving the Titan machine

[@transylvaniadesign5732]

I got the Laser point 3 53"....more than a year ago, still running great and if you tweak it and adjust the settings right, I cut at 800 speed, with 60 blade and 0.5 offset....is cutting fast and the quality of the cut is great, sharp....no round corners or weird cuts!!

[@rave112]

Great review. I really want to get into cutting vinyl and reviews like this are very helpful.

[@transylvaniadesign5732]

I've cut 50 yards!! Of HTV in about 6 hours!! Everything cut just right and weeding was fast!! I love it! This is one of those cases when the operator and experience can get the job even better than someone who has money to buy an expensive machine but they don't know how to use it.

[@thegirlthatprints8190]

9 years later is it still going? i found this video on a forum!!

[@arkano01]

can you make a review 2 and a half years later to know how things went with this machine? i'm thinking to get the titan 1 but the reviews are always around a week or so of use, so having a better perspective years later is extremely helpful for new owners. Thank you!!!

[@todaystopic3527]

So five years later would you still recommend the titan 3 ? I'm looking to get started in vinyl.

[@garciarosa100]

This is the only review that answered all my questions, thank you.

[@CREEPDOGGTV]

Awesome review vlog, that machines a "MONSTER"👹I can't wait to purchase the Titian 3 tomorrow.

[@guez2000]

So... 5 years later, how is the Titan 3 Vinyl cutter still going?

[@BucketHatForever]

Can this cutter do perf cuts for contour cut stickers?

[@jp450r]

I bought the MH series and it was ok but i have no complaints with my SC2. its made me a lot of money but i am always up for upgrading so i am planning on getting this next.

[@KtuluLeaderRise]

What did you end up getting 😂

[@El__Cherry]

Can you use window tint on it ?

[@FATBOIENTERTAINMENTSANTANA]

Hey I just got one and i keep getting a blue screen i cant get what's wrong wit it

[@glennracoma7481]

Appreciate your demo video on the Titan 3. Yes, I agree. I owned a Graphtec and Roland high end and it finally went down. Searched online for a good plotter and came across the Titan 3....yes Sevo motor is the bomb being that I've been using cutters only running on servos. And like you I'm professional and heard too much negs on stepper motors and realized that we need to step away from steppers (your statement on stepping away) stuck with me. Considering the investment; $1,000 normally returns within a month for a working sign shop. But unless that's the best one can do, until stepping up from a stepper to a servo. Thanks coming close in making an intelligent considering how plotters these days are way overpriced. Having high end cutters use to be feasible not for these days coming. Thanks.

[@k3hlan]

Thanks for the review. I was thinking of going the cheaper route with one of the $300 or maybe the $600 option but this one looks pretty good. I picked up some useful information and tips off this video. Thanks man!

[@MrCeez1]

I have a older cutter from 2005. It works good but the software is outdated. still works but i would like to go to a more modern up to date software. it that possible?

[@THEODINOFFICIAL]

I have a question how much to have a complete system setup and running to apply to shirts

[@martinpawlina2538]

James I enjoyed your video on the Titan 3 cutter, I'll be getting into making decals soon and the Titan 3 is what I'll be purchasing. Can you make a tutorial on how to make a multicolor decal on the Titan 3 ?

[@Jasondb55]

Dumb question but I don't know, can you cut 24" rolls in a 53" cutter?

[@leorivera4005]

would have been great for u to show end results...

[@PikesPeakGraphicsDecals]

+Leo Rivera you are right I am getting ready to make huge series of new video from beginning to ends

[@SpirituallyAligned000]

I need a video for dummies using titan3 and SCAL4.

[@hankooks2k]

Does this plotter auto measure the width of the film being used?

[@sewwhattees5120]

I purchased the titan 3 28 inch but can not get the blade to cut good. Can you set up a video of installing the blade. Us cutters are great at customer service but no videos on set up like this. I need this to get working and get it paid for with some jobs I got coming up.

[@MindsetBuildsControl]

nice review , looks like a quality budget cutter , I want to start a vinyl decal business this looks like a good start .

[@PikesPeakGraphicsDecals]

+michael cooke this is a professional cutter for sure...not a cheapo

[@davejones17]

Great review… thanks for showing me the end product..

[@fernandolanderos4600]

Would you use the Roland instead of this cutter?

[@Tattoosal805]

Can u Do a step by step Print and Cut tutorial...

[@MisterBinx]

I just got mine and did some cuts. The biggest thing is getting blade depth right. At 70g pressure I am cutting into my Easyweed second layer just barely enough not to ruin the cut.

[@signtrendz1]

What do you think about the new Titan 3 SE. Like yours but the black one. The black one. I'm looking at getting one in 53"

[@robertoalcantara5803]

where do you buy replacement blades for your titan 3?

[@parrisound]

Can this be used for print and cut

[@ynellirosas]

So what’s the longevity on it?

[@tomydala]

is this and its software compatible with the Epson S80600 printer?

[@bravobravo3498]

How did you adjust the arms

[@carlosLopez-ws8py]

I just purchased one on this great review.

[@williamtucker220]

Pleas respond if u can...how does it do with the spool function im jus getting started and im getting more work that my cricut cant handel currently doin a 24x24 image

[@e3customdesigns79]

i'm using a mac and it says ARMS feature is not compatible with Sure Cuts A Lot Pro Software or MAC operating system. Would that be a big issue ?

[@PikesPeakGraphicsDecals]

+E3 Custom Designs If you are strictly cutting vinyl the answer is no, you never need it. Arms is for example- you PRINT vinyl on a vinyl printer and need to cut your stickers perfect to fit logos and things like that. People will take their printed roll of stickers and put it in the cutter with arms and have the cutter cut around the stickers. If you are vinyl cutting on vinyl you can simply make your cutting border inside your cutting software.

[@e3customdesigns79]

+kustom Signz 719 i got my 15 inch TITAN 3 cutter, I've tried different speed & force settings. im using heat transfer vinyl SISER. i tried leaving it on the roll & cutting out the size i only need. the vinyl moves around, or bunches up. i tried lining up against the edge or about 1/4 inch from the edge, i doesnt matter...do you hava any advice you can offer to me ?

[@craftbytwo8089]

The control panel looks identical to the Saga Cutter and the Secabo. Any idea if they are all the same, but marketed under different brands?

[@fernandolanderos4600]

What settings do you use for htv?

[@tabaapparel3040]

hello I m going to start to dong thing in hows now thats the trade wars are happing but I have a question do I really step away from a stepper motor is not worth my time or money ? can your tell me why buy chance you see like you have worked with a few different types of machines Thanks from TABA Apparel

[@chuitzil]

I just recvd the Titan2 as i dont need the ARM feature for now.. Started cutting a few days ago... but dont know much about the speed/pressure .. when i ran my first run it was cutting great however some of the vinyl was coming up during the cut .. not much but you could tell.. would slowing down the speed help ?

[@quiquibased]

I have a Titan 2 as well my speed /force is at 300/93. What is yours at? I was having this problem of vinyl coming up because my blade was to far out. Tighten it to where it doesn't stick out more than a credit card. Hope this helps

[@PikesPeakGraphicsDecals]

+Quiandria Banks speed is 408 normally I like that speed always run my blade at 103-105... Never under 100

[@FUBAR956]

Does it do perforated cuts like the Graphtec 6000-60 Plus?

[@SHOCKANDAWTV]

It has now been 3 years how do you feel about this cutter compared to the rollland

[@niab9027]

I do a lot of small jobs , like shirts and mugs , which cutter would you suggest?

[@camdensons8517]

how many mils thick can it cut?

[@brap414]

Just bought a laserpointer 2. Do I need to worry?

[@pamelabrown1127]

what size cutter is this? what width do it cut?

[@MsBeautyHeaven07]

which cutters have servo motors? which cutters are junk? i only have enough money to buy the table top Titan

[@PikesPeakGraphicsDecals]

+Destiny Scott I believe the table top titan 3 is the only Servo motor, any other table tops are the cheap ones

[@alexpolanco007]

Can this cutter handle card stock and foam core with the pen attachment to draw patterns? Also any idea what the maximum thickness you can feed?

[@quiquibased]

Can you cut dark transfer paper with this?

[@alcarrizal6096]

So i just set up my vinyl cutter and my image cut out good from what I can see but I can't seem to figure out to get the machine to feed out the vinyl roll so i can get my image off. Any help? Your video ends right where i have problems.

[@PikesPeakGraphicsDecals]

+Rey Carrizal after the cut is over and the blade goes back to its original spot....You need to push the round On/Off Line button...just once...then use those arrow keys to move the vinyl. Then you can push it again to see your force and speed. Always push that button first to move the vinyl with the arrow keys

[@ivanperez6936]

How good does it perform while cutting detailed small decals

[@blingit6716]

can titan 3 cut sticky flock . rhinestone templates

[@JahirGraham]

Flock is no problem for this cutter, just use the 60 blade

[@GoldenTracksOriginal]

can be used to make Decals?

[@misterfarrow1022]

thanks for the video man you talked me right outta buying this product. many many thanks.

[@bobcatt2294]

Thumbs up - I am wanting a small form factor for the work I do, what plotter/cutter do you recommend? I want servo, auto registration and contour.

[@KashifKhan-mv2nc]

How much this one and how can bay

[@thebartboyzandmom]

I just Got mine and i am wondering if you could let me know how your cutter is still holding up today?

[@jralexmaloney]

Do you still use this?

[@misswhitt21]

what size vinyl do you buy for a 28" Titan 3?

[@1980digdog]

Does the machine also makes paper patterns or just cuts vinyl

[@magdalenagomez8486]

hello, thank you very much for your advice, are very helpfulI have a question , I am staring with this businessthe vynil cutter machine is compatible only with mac

[@pokecardworld8055]

I see this was back in June would you still recommend it or is there somthing better now

[@pistols1702]

Hi, I am looking to get into vinyl work for vehicles and signs, i am looking at a vinyl cutter on ebay for 250 sterling (down from 300 which translates to 400 - 450 dollars) the motor is loud as i have seen on videos but that doesnt matter, its a Pixmax vinyl cutter 28" could you tell me if it is good for just a starter cutter thanks

[@freyjastear244]

how does one put the transfer paper on something so big? :o

[@momentoffaith2735]

Thanks for the review -- I have been looking at one myself - If you were new to the business would you do some of the add ons -- like Sign Shop In a Box , Heat transfer vinyl, what colors do you use most of , would you buy any of the vector art they have ? any other software

[@niab9027]

what do you use to make the baby bottles ?

[@PikesPeakGraphicsDecals]

I am going to make a better video on the Titan 3here soon, with better lighting and more review :)

[@channingcoer871]

kustom Signz 719 have you made one yet? 😬

[@digitalkitchen4996]

how much price

[@bigmoose22G]

Are you familiar with a copam 3050? how is this compared to that? I've been having problems with the cutter tearing up vinyl and having lots of chatter.

[@marjorietalbot]

I know you posted this a long time ago... but, how close do you think this cuts? Like, within how many in/cm/mm??

[@stephenskinner4143]

What sizes of vinyl will this cut? I use a lot of 12 inch and sometimes 8 in wide vinyl. How close to the edge will it cut? thanks for a nice intro to this cutter.

[@pokecardworld8055]

is it compatible with Windows

[@lavona11]

what about the Titan 1 and 2 is it worth it or go straight to 3

[@NH-fi9jv]

is this the 15" version in video?

[@Stevil808]

does the vac hold down help with cutting heat transfers? I've had a titan 2 for a few years now and it seems like that's the only upgrade on it. I love SCAL pro too, so easy to use.

[@sylviaavila7921]

Steven Parker does it cut HTV any good?? I️ want one but I️ don’t know how well it will do with HTV and HTV glitter.

[@TheAdventpixel]

Quick question i have a titan 2, i just set it all up but im running into the issue that before it runs the cut it makes 2 lines across. The cut is perfect but im not sure why it leaves those two lines.. any input on this? thanks in advanced..

[@PikesPeakGraphicsDecals]

+Francisco Soto Did you go and register your software online? If you did not, you will have lines go through the image as a sample.

[@TheAdventpixel]

+kustom Signz 719 That did it! thanks for the help!

[@billymelgar4411]

Still like your titan?

[@kushyisrael1652]

Hi are you still cutting and what kind of warranty comes with this machine???

[@northwoodssewist-aprilschu8685]

Do you mind sharing where you purchase your vinyl from?

[@katgv2514]

Hello, liked your video. I am interested in getting a bigger vinyl cutter. Right now I am working on a Silhouette Cameo (cutz up to 12X24"). I think the sure cutz alot program works with it also, do you know if the programs are similar? Thx Kat p.s. how small of an area does this cut? or do you use a smaller vinyl machine for that?

[@bayvic2008]

nice video..my goodness i like this cutter it's very quiet I currently own the new Roland GS-24. I think i'm going to buy this just for back up.

[@PikesPeakGraphicsDecals]

+Victor Baker I love roland...I think they need to make their cutter software a bit more friendly and easier to do more with. If I could put the Sure cuts A lot Pro 3/4 with a roland....that would be the ultimate package for me. But the Titan 3 is the ONLY cutter that gives me the Roland feel with the software I am happy with :)

[@PikesPeakGraphicsDecals]

+kustom Signz 719 I would easily call the Titan 3 the Roland Gx-24's mirror matched brother cutter. My opinion as I have them both.

[@bayvic2008]

I AGREE with you .I first owned the UScutter 53 inch cutter but couldn't get it to work ever since i bought it used on ebay. Ebay was very kind enough to get me 100bucks off the seller bcos of misleading ad. my package came with outdated software....I then bought the Sure cuts Alot pro. still no luck..thats what prompted me to buy the new Roland GS-24...my oh my....'m the happiest guy ever since but i'll buy Titan 3 as backup...i like the way it works

[@vernillthompson2420]

my name is thompson i want to get into the business is this the best machine to get from Trinidad

[@collinvassell12345]

Hey man where can i get those racks to buy

[@TheSkydiverphoenix]

That is wicked fast and quiet!!! I want one! What size are the smallest letters you cut on it?? I have a laser point 2 ans it is slow and loud...

[@PikesPeakGraphicsDecals]

***** I dont do small stuff....I know it it cuts pretty small being servo motor. This thing runs like a Roland GX-24 its great!

[@scottlewis5521]

Love the video. I'm still on the fence about models to purchase since I last watched this video over a year ago. wondering if you could help me. I'm a screen printer so I'm looking to get a cutter for these reasons: -customizing shirts/sleeve prints with shirt vinyl instead of making screens just for 1 shirt. -contour cutting screen printed vinyl stickers -Stencils for disc golf disc dying (won't need to be more than 11"x11". Do you think I should just go with the 15" titan 3? I was thinking of getting the Titan 2, but I think only the 3 has the ARMS and vacuum which I think would come in handy with the stickers. as a screen printer I don't have much desire to offer signs, wraps, etc so I'm thinking the 15" version might not really limit me that much. I'd rather get the 28, but it's a big price difference. Thank you for your time!

[@steveadams7195]

Good morning. What size is that cutter you bought. I think after doing some research iam going to get one of these too

[@RParkinson100]

Great video! I am cutting Hartco 35 mil sand mask with my titan 2. Do you know how to properly adjust the tension on the pinch rollers? That is one thing, this did not come with a manual, I can not find a thing online! Thanks for the vid!

[@MotorHomeManiacs1]

I run my speed at 408 and cutting gorse at 100 at this speed and force if you are having problems you need to set your blade right

[@OfficialXPage]

do u recomend the gcc lx 24 over this titan 3. im looking to buy either one. or the best one you think if you have used both! thanks

[@PikesPeakGraphicsDecals]

+XOfficialPage titan 3 is a better option over all

[@charmingd.6725]

So how is the machine so far? I am looking to get me one!

[@royalvarez4540]

Nice video bro, did you ever get around to making a video on pricing jobs?

[@PikesPeakGraphicsDecals]

+Roy Alvarez I have not made it yet, I will soon. I have not forgot :)

[@stephenalbanese2860]

WHAT MODEL IS THIS ONE?

[@PikesPeakGraphicsDecals]

CYCLONUT, INC. it is Titan 3

[@bennettbostons8416]

How are things holding up on the Titan3. I am shopping for my first cutter and this is high on my list of choices.

[@PikesPeakGraphicsDecals]

+BennettBostons everything is awesome with it...no complaints at all

[@chancepickett8135]

hey just curious where did you get the racks for your vinyl rolls? we are trying to find a good way to hold all of our vinyl on the wall while so that it doesn't get ruined. thank you

[@insidetech101]

Seems slow? Is compared toy Roland. What's your thoughts on speed. Not max speed, just faster per your video.

[@PikesPeakGraphicsDecals]

+Insidetech101 speed is just as equal, I run my speed on the slower side as i do smaller jobs.

[@ezwins1234]

Idk about you man, but I have a basic US Cutter 28 inches and I prefer the speed vs the sound. That job would've taken 2 minutes at most