Much respect to y'all metal polishing is hard work...I tried it and it fkn sux...
@patbarrett92636 жыл бұрын
now see how long it takes for the blue beacon to unpolish your wheels...
@sixshinez92907 жыл бұрын
I could have polished probably four steers in the time it took you to do that one.That would be without spending money on that machine ( I'm sure isn't cheap) and providing same or better results. l'll be putting a video up shortly.
@twiztid420cronic6 жыл бұрын
SIX SHINEZ that guy had no idea how to use that machine I ran one for years and it spins about 4 times fast then that
@gremlin13966 жыл бұрын
Just like polishing on the truck the grinder should match the angle of the wheel good way to blow up in Airway disc also look at last part where they switch pads look at what's left of the pads looks to me like you go through a bunch of pads doing a wheel with that machine good attempt
@bobbyhorn70598 жыл бұрын
Need to fix the air leaks save the compressor.
@luiszuniga9462 жыл бұрын
Amigo lija con agua para que no alla polvo yo hago ese mismo trabajo y lijo con agua
@ronaldratliff9006 жыл бұрын
I have mounted countless tires and polished more wheels than I care to count
@tigerbandit787 ай бұрын
How long did it really take. Way too slow and the amount of compound was a ridiculous waste. I could have done 3 in that time with less compound with a grinder and had a sandwich
@HectorHernandez-uf7yj2 жыл бұрын
Buenas tardes soy Héctor aitobus cuánto sale una máquina para pulir
@nathanmeurettlife65526 жыл бұрын
So the machine doesn't sand the rim that's pretty dumb.
@theresavictor4225 Жыл бұрын
Where in Memphis can I get this done to corvette wheels
@bobbygreenwald48015 жыл бұрын
I saw a post of some one doing a wheel in less than 3 minuets while still on the truck. This is a train wreck. I’m sure everyone is rushing out to buy one of these things. Someone is always looking to build a better mouse trap. Let’s bolt a small block Chevy to a buffer. When you get sucked in by your glove or smacked in the face when that buffer wheel comes apart you will go back to the fast way.
@gerardj.97478 жыл бұрын
Nothing worse than watching a demo and not understanding anything the operator is saying. The machine is so loud it drowns out the operators comments. I personally think its kinda critical what the operator is saying. To the operator nice job on the wheel, to the person making the video very poor job. Your welcome!
@TheKAKA1977 Жыл бұрын
Turn on subtitles, thanks
@SearchingForPurpose6 жыл бұрын
That looks like one big waste of money.
@hectorsoto42574 жыл бұрын
U damn right
@salvadorzavala968 Жыл бұрын
como se llama la maquina para pulir y ubicacion. para mexico
@chapleaudick6 жыл бұрын
the rpm seems way to high just throws the polish compound
@Kmacnm6 жыл бұрын
Would've been nice to have seen the finished results don't ya think????? Whatever....
@slickwilly58514 жыл бұрын
yes
@sneaks016 жыл бұрын
That machine is an accident waiting to happen!
@donaldrust19008 жыл бұрын
Hey Kevin clapp!!!! It's the PUP
@mk-lt9fu4 жыл бұрын
me gustaria comprar una maquina para pulir rines como puedo cotactarlos estos en san luis potosi mexico
@jamesmcdonald35015 жыл бұрын
I was wondering couldnt he have done that faster with a hand held machine. Ive never done anything remotely like that so thats why i was asking. Other than that it came out nice. Good job
@irate746 жыл бұрын
Home boy is strait tweaked out in this vid LOL
@user-ol6od5xo5n5 жыл бұрын
من اين احصل على هذا الاله
@Cramitsucko8 жыл бұрын
That's pretty :)
@nasa19855 жыл бұрын
Your face mask needs to seal properly around your face... having it half over your cap is stopping it from sealing correctly. That is why your face is slowly going black and in turn the mask is not working as a respirator at all. You are breathing in all that dust and grime.
@yoimerandresmancotorres5372 Жыл бұрын
Cómo puedo adquirir una máquina de estás
@calebmendoza5067 Жыл бұрын
Polishing with a grinder Vs this type of machine is a night and day difference. I own several trucks and those guys that claim to be the best can't even produce the same results as this type of Machine.
@100pyatt6 жыл бұрын
Wow that was sloooowww and heavily relying on labor, not a automated machine!
@sswhaat6 жыл бұрын
Your gloves and that watch are going to hurt you some day using equipment like that.
@bettygoodson39836 жыл бұрын
My Boyfriend build his out scrap metal he had his works better then that one and a lot faster I make a video when he uses it again
@feur28845 жыл бұрын
Where's the video I want to see it
@westondecker683 жыл бұрын
Still waiting on the video.
@robertesposito98713 жыл бұрын
The not working I heard him say was 400 grit sandpaper
@TipsyMarlinTravels3 жыл бұрын
Out side of rim is easy. Did I miss the part were they did the inside. Other then that, that is a P.O.S. setup.
@invisiblegypsy7255 жыл бұрын
Im not so sure about this.
@stevenrempel74286 жыл бұрын
The mask doesn't work if you don't shave. Think about your future!
@1bad69xss46 жыл бұрын
Steven Rempel actually it’s fine for this type of work. He’s not under supplied air in an oxygen deficient atmosphere. He’ll be fine.
@MrSprocket2u7 жыл бұрын
bad process .... heat from buffing expands in too the rubber
@arfurfoxhaike7 жыл бұрын
Don't talk shite!!!
@hectorsoto42574 жыл бұрын
That thing sucks I would of down two rims already and would look better then that