Titanium Burr Upgrade and Shimming for Starseeker Edge Grinder

[@mbs6585]

English please my friend, your videos are incredible!.

[@ksalanpang]

English is fine. There're more non-native english speakers in this world i believe.. your video had helped me to decide on this grinder. I have only so limited space and i have no choice but to get this one for my espresso. An upgrade on my lever machine had me gone so much finer on my hand grinder, which it took me even more effort than before. I was happy with my previous lever, but i know an upgrade is imminent.

[@morningcoffee1]

Thanks alot. Please check my latest video on Starseeker E55. It's worth it and cheaper.

[@ccarch]

Thank you so much for covering this grinder, gave me confidence to buy it and have been loving it so far

[@morningcoffee1]

You're welcome 😊 🙏

[@ylim001]

Hi, thanks for your coverage for this grinder. Have pre-ordered thanks to you. Also pleaae continue in english as i wouldnt have found your videos if it wasnt in english.

[@WTFA54]

Theres also upgraded burrs for the Starseeker Edge+ now too! Curious if they have the same benefits

[@champs1076]

Noticed any significant difference by changing the burrs so far? ☕

[@morningcoffee1]

I tried only 2 coffees so far. more clarity and boosted notes are my main observations.

[@ahmednegm8981]

Great video. Can you please tell your experience with titanium coated burrs after long time, Also, can you please put the link for the shims, and diameter and thickness, because i want to modify the grinder Thanks

[@morningcoffee1]

It is really good if you consume coffee that is more towards fruity notes. It will highlight the acidity of the fruity notes.

[@morningcoffee1]

These is no direct link for the shims, but go to the Starseeker store on AliExpress and contact them they will send you a link to pay on AliExpress, and then they will ship to you.

[@ahmednegm8981]

@@morningcoffee1Thanks 🙏

[@lvenegasp]

Where could be found the burr update ? Not found in Amazon

[@morningcoffee1]

Here's the on AliExpress. a.aliexpress.com/_olLbR4Y

[@lvenegasp]

@@morningcoffee1 many thanks

[@abuda4540]

🎉 I’D Bought it by your video 😅😅😅😅😅

[@jeremy.r0an]

I noticed that you add grains before turning on the mill, is it correct to do this..? Most people turn on the mill first and then pour in the roasted beans, which makes it easier for the burrs to grab and grind them into powder. I bought milk and these millstones as a gift, some will arrive earlier, some later..., in any case, your review influenced the choice to purchase this model, for which a special thank you. How does the mill perform with light roasted beans? Tell us about it if you have experience.

[@morningcoffee1]

Thanks a lot. You are correct. I did that to challenge the motor and see if it is going to stall or not. And it performed well. The grinder is really good value for the money for sure. I mostly use it over Niche zero and DF64v.

[@jeremy.r0an]

@@morningcoffee1 Thank you. I took an Orca from Cafesing, it is manual (and I used an electric drive with speed control for it, sometimes it’s hard for my hands), the mill has flat and ghostly 45mm burrs and can be easily changed places. kzbin.info/www/bejne/bZWtgZqddqmKZs0 & kzbin.info/www/bejne/rnW3m42dl5alZrc is a third-party review of it, but in general, what it is, that is... You can’t grab the stars from the sky, but a little grinding is enough, especially since it has a convenient static motor for it.

[@jeremy.r0an]

​​@@morningcoffee1Greetings! Yesterday I received titanium millstones, but did not find (in the package) any rings (gaskets for fine tuning); By the way, the manufacturer recommended placing them under the impeller for greater integrity of the assembly, and not under the millstone on top of the impeller (this is by the way) and if you look at it this way, it looks quite logical and there will be no gap between the impeller and the millstone into which coffee dust and oils get clogged. */* I thought that it could be used as a material for the gasket - Teflon (namely fluoroplastic; its polymer form), it holds its shape perfectly, has a lubricating effect that reduces friction between elements, like a bearing, while being resistant to high mechanical and temperature loads. Flat flange for a PTFE washer for 452 ₽ - already with a -18% discount sl.aliexpress.ru/p?key=tWIsOmL

[@halimroslan5528]

English please my brother, I really like your accent.

[@SpecialtyCoffeeClub]

الله ينور ❤️

[@mostafamoatamed5551]

i knew it ......i knew it .....i knew it .. its Egyptian accent منين يا غالي في ام الدنيا وياريت وسيلة تواصل معااك انستجرام او فيسببوك القلب مش بيحن من فراغ و الله متابع ليك من زمان

[@TuffCheez]

English please. Your English is good!

[@mostafamoatamed5551]

ياريت وسيلة تواصل معااك انستجرام او فيسببوك

[@morningcoffee1]

ممكن تنضم لجروب USCC للقهوة المختصة بالإمارات علي فيسبوك.