How To Troll With Planers: The Three Methods Fully Explained! CATCH MORE FISH!!! Offshore Fishing

[@JeremyReger]

I’m subscribing because you said funner.. I fish Lake Erie but love watching this man. I don’t need no grammar people bothering me, this is my safe space

[@ScottBonnerOutdoors]

Haha thanks

[@johnsimmons2840]

By far the most informative and clear-cut video I've ever seen on planer fishing. I'm a veteran salt water fisherman including inline planer fishing, but have never used a cleated planer. I'm visual and had to see it done. Man you really laid it out perfectly. Thanks so much!

[@ScottBonnerOutdoors]

Thanks for the great feedback. The cleated planer is such a great method once you get it down

[@connereagleton8099]

@@ScottBonnerOutdoors Instead of a swivel you can use a paper clip. Both work great

[@billbenn401]

Good video on planers. I have been fishing for over 50 years and a Master Operator Captain for 40 years, but did know about the last method that is very simple & easy way to troll a planer. I especially like the fact it can be used with spinning equipment, that is way sportier way to catch fish than conventional gear. Good luck with your channel, wish it was available when I was younger. Capt. Bill

[@ScottBonnerOutdoors]

Thanks for the great comment. I appreciate it. Method 3 is my favorite because of the spinning gear. I fish for fun above all other reasons

[@richo1177]

I'm in Queensland Australia and I fish for Spanish Mackeral ( King Mackeral to Americans ) I only use spin gear now, a Shimano Sedona 4000 reel and 6 foot Daiawa Aird rod with 30lb braid to 60lb mono leader, it's the most fun way to fish now with plenty of huge fish caught on such light gear

[@miketexas4549]

I consider myself a beginner/intermediate level offshore fisherman - recently I went out with an expert buddy who was running skirted ballyhoo on planers and we crushed mahi with it. I tried to get him to explain it (he used technique #3) but I couldn't quite grasp what he meant. This video not only explains PERFECTLY what he did, but two other methods I wasn't aware of. Excellent video man, subscribed! Tight lines from Hawaii 🤙🏽

[@ScottBonnerOutdoors]

Thanks a lot. I also run planers for mahi and it works great. Most people just run surface lures and they are missing out on some nice fish

[@RRlocoENGR]

You explain so much better than most! Enough information without repeating and getting boring, thanks!

[@ScottBonnerOutdoors]

Wow, thanks!

[@PenCo91oh]

Great video! I have a small vessel and that last set up with the poor man's down rigger just upped my game 1000% thank you for your skills and knowledge!

[@codylewis2316]

One of the best educational videos I’ve seen on KZbin brother! Thanks for the great tips

[@ScottBonnerOutdoors]

I appreciate that!

[@Al-oe8ib]

Really good info Scott, and well put across. Been a charter skipper for 30 years, but haven’t used planers until recently, as a replacement for a downrigger. I would encourage the use of a leader wheel that allows for clipping on your lure before feeding it out by hand, as 3 times, I have seen a fish grab a lure fed out that way, before being attached, during a hot bite and it was bye bye lure. Keep up the good work and good luck with your chanel

[@ScottBonnerOutdoors]

Thanks for the tip that makes a lot of sense

[@F15Bluto]

Thanks for this. I already planer fish (method 3) but it was tougher to learn because you’re the first person to actually show anything you were talking about. Amazing how much more helpful a video is when you actually put what you’re talking about...in the video 😉 GREAT JOB!

[@ScottBonnerOutdoors]

Thanks a lot! I appreciate the feedback

[@georgesmith5042]

Question for either of you, how often do you get a fish tangled in the down rigger line? Do you bring it in whenever a fish is hooked up? I’m interested in using method 3 this weekend.

[@ScottBonnerOutdoors]

@@georgesmith5042 the only time the planer line has been tangled is while fighting a tuna I got sharked and that shark messed me up. I usually don’t have an issue just always keep in mind you have a line down there. Always leave the boat in gear

[@georgesmith5042]

@@ScottBonnerOutdoors thanks for the info!

[@johnslonsky3956]

The last method is the reason why I had to subscribe. Excellent thought and really great, simple, methodical approach.

[@ScottBonnerOutdoors]

Thank you I appreciate that

[@tw00061593]

*Love St. Croix enjoyable.fishing recommend . Great action. Very enjoyable rod to use. I matched it with a Quantium Catalyst reel and together it works great. *

[@bobpadgett9082]

Very good info. I love to fish planers. But I've always wanted to get some fish on light gear. Rigging to the clete will allow that. Thank you for the lesson.

[@ScottBonnerOutdoors]

Absolutely. It makes the experience more enjoyable despite the extra steps involved. I enjoy fighting fish on light tackle myself

[@johnstark340]

Great video, glad I came across it. Nice to see someone on a smaller boat like I fish using tackle I can afford. Very informative! Thanks!

[@ScottBonnerOutdoors]

Thank you! I appreciate the comment

[@bassmandan9484]

You made this look easier than snook fishing. And that says a lot. Very well done!

[@ScottBonnerOutdoors]

Thanks a lot!

[@eddier9380]

I do like the fact that you have notes (even if they are one your cell phone) so you make sure you are giving people correct information. Good video

[@ScottBonnerOutdoors]

I actually wasn't reading notes I was looking at my phone to make sure the camera is recording me through the GoPro app

[@iansullivan7830]

Hi mate I have been fishing all my life I have never heard of this type of trolling before it is all new to me I know about down riggers I must say that your video is very informative for anyone who does boat fishing especially trolling the way you explain this method of trolling and how it can be done 3 different ways using the same jig set up not only do you explain the jig set up you also explain how to deploy the jig in water without tangling it around your motor You gave a very good informative description of your boat speed as well as reel setting for drag during this time jig deployment I am sure that is something a lot people would not be aware of and will find very informative to know I know I have learnt something new hear myself and I hope to use this sydney harbour soon thanks for your video great work

[@SmittysSurfFishing]

I'm determined to get my trolling game perfected over here in the Panhandle. Your videos are teaching me so much. Thanks for dropping the knowledge!

[@ScottBonnerOutdoors]

Thanks for watching! I hope it helps

[@frederickk2852]

Excellent. That really has taken the confusion out of this planer method. Many thanks.

[@ScottBonnerOutdoors]

Glad it was helpful!

[@cesarcanales3909]

Thank you very much. By far the most educational video on planners I've seen. Best regards from Peru!

[@ScottBonnerOutdoors]

Thanks for the amazing feedback! It’s very cool finding out people are watching from around the world so thanks a lot for the comment!

[@chickenredcat]

Thanks for taking the time to educate us newbies!! I am new to fishing in Puerto Rico and am looking for clever ways to fill the cooler. We've caught mahi, wahoo, kingfish and tuna so far and are always looking to get better. Hit me up if you are coming to the island, I'll be happy to take you fishing!!

[@chaugi]

Great job simplifying these methods. Looking forward to my next outing. Great job. Thank you!!!

[@ScottBonnerOutdoors]

Thank you! Good luck out there

[@laurenceorr5618]

i recently went on a fishing charter and used planers for the first time, didnt quite understand it , i watched your video and you couldnt have explained it any better... thanks for the info!!

[@tonyl6068]

Great video man! Finally someone that explains how to do this simply! I’m now a subscriber.

[@ScottBonnerOutdoors]

Awesome, thank you!

[@chriswhitlock5097]

Hey Scott. Great video! I was using the planer bridal method for awhile and it works fine, but eventually switched to the 3rd method (rubber band). Two reasons: 1st, sometimes the bridal swivels would get jammed up in the smaller roller guides on my trolling rods and I would have to "shake" the rod or pull them through by hand sometimes at critical moments. 2nd, I fish alone a lot and so not having to set the rod down and take off the planer, is just easier. I haven't tried the 1st hand lining method yet...maybe next time! Thanks for making it look so easy!

[@chriswhitlock5097]

Also...3rd reason, in south FL the weeds get pretty thick in the summer. It's not a problem for the planer, but it pulls even harder on the "already stressed" rod/reel. Tied off to a cleat it's not an issue at all since I use 400lb mono outrigger line (but I do pull it up to clean it off every now and then).

[@ScottBonnerOutdoors]

Yes I know all about the south Florida weeds they can be a real pain. Makes trolling very difficult sometimes. I’m glad it’s working for you!

[@portwegian1368]

Excellent video clarified few things for me big thanks from 🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@ScottBonnerOutdoors]

Glad it helped and thanks!

[@1pdigit]

I'm new to saltwater fishing and I've never seen method three before. Very interesting! If you put a sliding rig on the main line and put the rubber band between the planer line and the sliding rig maybe you wouldn't have to worry about excess line between the rod and the planner? If the pressure of the water is strong enough to push the slider down to the planer it seems like it could work. Then you could adjust the distance the bait is from the boat by letting out more line. I don't know but its a thought! Thanks for the new info!!!

[@ScottBonnerOutdoors]

I like the idea. Have you tried it yet?

[@drpando]

Hi - I'm new to planers - and I just barely understand how Scott's 3rd system works to begin with, but it seems your idea of a sliding ring does add the adjustability component that Scott's rubber band method is missing. I think i need to see this (I'm a visual-based learner). Any chance you can forward an image of your idea? I'm in Eastern time zone (Florida).

[@rickbold9337]

Hit the button. Good clear info. Al methods are good in their own way!

[@ScottBonnerOutdoors]

Thanks for watching!

[@jeremylindsay54]

Its 1 am looking for planar pointers before going out in a few hours ty for the great demo

[@ScottBonnerOutdoors]

No problem thanks for watching

[@markhamdickson2163]

Helps me out a lot on the “slaughter” style rig off the cleat. I read about that on Reddit but really helps to see it in a video. Thanks a lot for posting. Have you heard of anyone using this method in conjunction with outriggers? Might be cool if you could get 4 lines out by spreading them with the outrigger. Might be too much force from the planar ans also Little technical to pull the planar line over alongside the boat to clip in. But if you could might be a neat spread tactic. I think I’ll try it next time I’m in the boat.

[@ScottBonnerOutdoors]

I have used planers while also trolling with outriggers yes but I usually just use method 1 or 2 in that scenario

[@rednoize4391]

Very informative, I recently purchased a new boat and plan to try your techniques. Thank you very much for taking the time to make this video...

[@ScottBonnerOutdoors]

Awesome! Good luck out there

[@tiolc1820]

I just bought my first boat ever and started fishing. im still leaning the ropes. I watched your video about planers and tried out method number 1. I hooked a shark lol I was just showing my buddies what it was and how it was supposed to work and it worked alright. thank you for the video! I just ordered more planers and making a poor mans setup hopefully trying it out this weekend if weather permits.

[@ScottBonnerOutdoors]

Keep at it you’ll become a pro in no time. Hopefully the next strike isn’t a shark lol

[@jimwatson9736]

Sharks taste great Just saying

[@chineseeyedgrowr9182]

Great video Scott. Your ability to teach is second to none.

[@ScottBonnerOutdoors]

Thanks a lot. I have more videos coming up

[@pistoleropr]

Subscribed! I appreciate you taking the time to show us these techniques, Scott, thank you.

[@ScottBonnerOutdoors]

Thanks a lot!

[@MrTravis0306]

Very well spoken! Nice video with no wind noise!! Keep it up dude

[@ScottBonnerOutdoors]

I appreciate that. Thanks for watching

[@garypowell550]

Best explanation I’ve seen on using planers, great video from a new subscriber.

[@ScottBonnerOutdoors]

Awesome thanks for subscribing. I’m planning on putting out lots of videos in the future

[@arvfishing]

This video is amazing man. Everything I could have ever wanted to know. Great job. Now I need to figure out how to do your #3 method on my Sea Doo Fish Pro.

[@ScottBonnerOutdoors]

Awesome, thank you!

[@RollieII]

Thanks Scott, great video. Just getting started at this I will be watching more of your videos for sure!

[@ScottBonnerOutdoors]

Awesome, thank you!

[@r8drvr819]

Very good video and with maximum information. Perhaps you could give us an idea of how many feet in depth, the various planers will cruise. Thanks!

[@ScottBonnerOutdoors]

I wish I could give an accurate answer but there are so many variables to consider

[@davids8132]

awesome tutorial on planer fishing! thank you. fished method 1 and 3 in the lower Chesapeake Bay today. worked very well for mackerel.

[@ScottBonnerOutdoors]

Awesome glad it worked out

[@hardcoreanglers3241]

Nice job ladies❤❤❤❤❤ very thorough! True anglers and well done!

[@joeyherring6360]

I really like that 3rd method! Thanks brother!

[@ScottBonnerOutdoors]

No problem thanks for watching

[@ziradee]

Best Fishing video I've ever seen on YT! You have a new subscriber. More videos like this would be awesome. Tight Lines.

[@bernardmerida2221]

great video , i learned a lot

[@ScottBonnerOutdoors]

Awesome, thank you! I have many more videos planned

[@ScottBonnerOutdoors]

Thanks

[@r8drvr819]

Content is KING; thanks for the maximum content!!

[@ScottBonnerOutdoors]

Thank you!

[@rickbassett4496]

Great video mate, Ive bought 2 planers, we live in Thailand, this way of fishing for kings non existant here. Will let you know how we go Cheers

[@ScottBonnerOutdoors]

That would be great to hear! It's a good method

[@ronbrisbin4851]

I really appreciated the detail. I learned way more that I anticapated. Thanks

[@ScottBonnerOutdoors]

Thank you! I appreciate the comment

[@MrCliftonLaird]

Thank You Sir. I will try that poor mans method.

[@williamdevine518]

Great tutorial, learned a lot. I’m an offshore guy who doesn’t get wahoos to often, got to get those baits down ok I’m on it. Thx

[@ScottBonnerOutdoors]

Awesome good luck out there!

[@724muskyhunter9]

I fish freshwater lakes and rivers for musky. How deep would you run the planer and at what speed? This is all new to me and you have been very informative 👌

[@ScottBonnerOutdoors]

To be honest I don’t know much about musky and their depths etc. but as far as speed goes 5-6 mph is a good starting point and adjust from there

[@kevinmorrow1944]

Scott thank you for your expertise loved the 3rd cleat method...keep up the great job!

[@broadwater5218]

What a smart man and informative video

[@RH-qk5lt]

Ok, serious question. have you ever tried running 100' of 50lb mono leader back on your cleet tied off #6 stationary planner and put a Xrap #30 Rapala mag Diver on it Then, used a 65# rubber bands method with say a 6" squid feathers and a octopus hoochie or a 9" Iillander and Bonita strips ran back say 75'? Its really utilizing 2 lures on one setup. The down fall is, if the Mag Rapala gets hit, it's usually a larger fish, down 40+ feet that must be hand lined in. BUT, it's effective. I believe the mix in presentation with 2 lures being ran fairly close together creates a wider and irresistible mix of bait. Love to hear your thoughts. Also, I finally got my planner bridal'sl length and correct double swivel dialed in. Now I prefer removing the planner. And just enjoy fighting the fish with zero hardware attached.

[@montrich1]

Wow just seeing this out of the box kzbin.infoUgkxQr1yd4Zc6qJF-scTB6Zb9dQbVpviuRxB recommend I have yet to fish with this set up, but based on the first hands on appeal, I can tell this is going to change the way i pack and carry to a whole new level. If you fish like i do, you know the smaller and less stuff the better. I’ve added a photo of just some of my gear so you can see how serious i am about fishing.

[@kaiwikoadeforest9497]

Gonna give this a try. Mahalo from Hawaii 🤙🏽

[@ScottBonnerOutdoors]

Awesome good luck

[@jasonrodean2282]

Great video! Easy to understand without anything unnecessary ill be watching the rest of your videos next!

[@LivewireTrucking]

Very informative, I like method 3 you use. It's now my favorite method as well, thanks man.

[@ScottBonnerOutdoors]

Awesome man glad to hear it

[@RiverReboot]

Very nice video! I'm getting ready to get my troll on..........going to use the remove planer method on one rod way back for cobia tubes and use poor mans down rigger closer for smaller spoons at same time. I subscribed.

[@ScottBonnerOutdoors]

Awesome let me know how it goes!

[@drpando]

Excellent video!! I'm a newbie, and I've been watching videos about planers - all of which require hand-lining in the last 50-100ft of leader! I thought a bridle system was the only way to allow for a quick release reel-in leader system, but this SEPARATE cleat-mounted system takes the cigar!!!!!! Thank you! Now if I could just figure out all the knots you used to tie all this stuff together..... (not sure if I need it for your #3 setup (mainline,, mono, wire leader?) , but I did buy a crimping tool and crimps for 100lb mono). I will subscribe if you have all this stuff on your channel.

[@ScottBonnerOutdoors]

I use the uni knot and crimps mostly. Thank you for watching!

[@MrCliftonLaird]

Well, your favorite method worked for me too in a big way. If your ever in Destin Florida and want to go fishing with me let me know and I'll take you. I

[@ScottBonnerOutdoors]

Awesome glad it was successful and I appreciate the offer. Might have to take you up on that one of these days

[@grandwonder5858]

Can you fish a lipped or lipless crankbait with a planer board? How much line should you let out between the planer board and the lure? Does the more line being let out between the planer board and the lure make the lure dive deeper? Also, does trolling faster make the lure dive deeper as well? Thanks for your excellent demonstration about planer boards, I have wondered for years how it work and I haven't a clue until I saw your video!

[@ScottBonnerOutdoors]

Yes you can troll diving plugs off of a planer. It’s a real good method for trolling for grouper and is done a lot. How deep it really goes will depend on several factors but if the lure is designed to dive 30ft it will be 30ft below the planer. I would run 100’ off of the planer board

[@gregoriocisneros5114]

Thank you for the teaching. I liked the first methoo

[@ScottBonnerOutdoors]

No problem thanks for watching. Good luck out there

[@paultew7087]

Simply an Awesome tutorial! Your work and effort are so worthy!!!! Many Thanks

[@LucentLures]

Awesome video! I feel like I've learned everything I need to know from this. Now, how do I keep the fish from tangling me around the downrigger with method 3? Does that ever happen?

[@ScottBonnerOutdoors]

Glad it was helpful! I very rarely encounter tangles by keeping the boat in gear and straight

[@backyardbrian7707]

Very clear and informative, thanks you! I grew up offshore trolling with my grandpa as a kid but it’s been so long that I am pretty much a beginner again. Nice to have some to the point and easy to understand videos! Seems like a every other “tutorial/tips” videos are just dudes showing off fish lol

[@ScottBonnerOutdoors]

Thanks a lot for the great comment. I tried my best to be clear and to the point

[@gerardamitranno8837]

Great video!I love how you explain all methods .

[@ScottBonnerOutdoors]

Thanks so much!

[@atw2453]

Excellent quality teaching video. Very clear and informative. Hooah brother! Come fish with us here in Catanauan Quezon Province Philippines anytime. We have excellent fishing here for offshore. And I'm one of the only American skippers here using conventional modern gear. Not nets and longlines.

[@ScottBonnerOutdoors]

That sounds awesome! Maybe one day

[@RobertoM892]

Just learned about that 3rd method! Thank u👍🏼

[@ScottBonnerOutdoors]

No problem!

[@687patrick1]

Hey Scott, great video, I live in New-Caledonia in the South Pacific and have the planers but did not really know how to use them effectively, but now I know !! I Subscribed also for more informative videos, keep up the great work and thank you for all the goood advices !!

[@ScottBonnerOutdoors]

Thanks for the feedback and for subscribing. More videos to come!

[@687patrick1]

@@ScottBonnerOutdoors Great! Iwill be waiting for theses Videos. I like the fact that you explain step by step, makes it simple and easy.

[@AnthonyTaylor-d7k]

I put a quick release clip on the trailing end of a cleated planer, it makes the planer dive deeper but the disadvantage is that you have to pull up the planer after every bite

[@0xb1sh0p8]

Your videos are very informative man. Hope you continue to make them. Maybe one on your preferred bottom fishing setup and techniques. Keep churning out content like this and maybe mix in some footage of catching and this channel will grow. Thanks..subbed.

[@ScottBonnerOutdoors]

Thanks a lot I am planning some more videos and I will get better at making them more consistently

[@emjayw3018]

Thanks mate, I will be incorporating that cleated method into my fishing on Australia's east coast and hopefully it will save me the added expense of a,downrigger, definitely earned a sub and best of luck in the future.. 👍👍🇦🇺

[@Reload77725]

Earned a sub? Yea ok clown. Who the hell do you think you are?

[@affordableparadiselawnland8562]

Im subscribing thank you for the ved! Its cool to see videos actually giving tips and teaching instead of everyone just catching all the fish most people dream of catching so really thanks

[@ScottBonnerOutdoors]

No problem thanks for the feedback

[@d.nastyfishing6091]

Great tutorial on how to use planers. Quick question. Can you run a lipped lure that drives 30ft on it's own with a planer. Making the lure drive 60ft.

[@hakangunsur6365]

Great explanations, thank you very much.

[@ScottBonnerOutdoors]

Glad it was helpful!

[@ckaz2806]

Great video Bro very informative! You do a great job explaining every method!

[@ScottBonnerOutdoors]

Thanks a lot!

[@kerryhennessy169]

Well explained, I like the poor man system for wahoo myself. Liked & subscribed

[@ScottBonnerOutdoors]

Thanks a lot man

[@Danielasfishingandmore]

Love this Video it was so informative you really took time to explain everything very thoroughly I had watched a couple other videos and there was pieces missing and with yours and explained everything and I love how you went through all methods which I never had heard of any of these so when I came upon planer fishing I was researching it and then got your video which has been so awesome I will definitely share your video and keep subscribed and looking forward to more videos

[@ScottBonnerOutdoors]

Thank you so much!

[@roostercogburn6247]

Question: I just tired your hand lined planar and had issues with setting out the mainline. The planar has 100 feet. It's not clear in your video if I should send out the main line at the proper length (100 ft) and then connect it to the planar by the rubber band? I may be missing it but once you connect the rubber band to the mail line it's not sliding down the planar line to the bead at the end of the planar.

[@lenpenner]

Scott have you ever used a bridle that has the double snap swivels on each end with the outer most snap on each end is cut so it's only a hook that hooks into the spro swivels that attach to the main line and the leader?

[@ScottBonnerOutdoors]

I have not because I’m afraid it will slip out on accident. I do hear they work though

[@joedigirolamo3567]

Bummed you stopped making videos bro. This was great. Thank you. Subed

[@ScottBonnerOutdoors]

I’m getting back on the ball here I promise. Thanks for subscribing!

[@joedigirolamo3567]

Looking forward to it. I’ll be finishing my graduate program in the next year & buying a boat ASAP. Just trying to learn as much as possible before then.

[@jeffreyvanderklip6769]

Bin looking for this kind of info for awhile. I use rubber bands for marlin fishing, so this came easy.

[@patrickng1158]

i really liked your video. I am totally new to planer fishing and you really helped with your video. Only question is you were mentioning about various sizes of planer so if you can, can you explain more on the relationship between boat speed / planer size / trolling line lbs / leader line lbs etc. Thanks.

[@ScottBonnerOutdoors]

Typically the heavier the planer board the deeper it will swim. Line diameter, boat speed and distance from the boat also have an effect

[@cliffvalentin3564]

Best explanation ever. Thanks.

[@ScottBonnerOutdoors]

Sweet I appreciate the feedback

[@jimdrechsel3611]

Will the Squal 30 work planer fishing? Would the rod the Squal 50 comes with along a bridle to pass through the guides? Will the guides be ok for using braid? Would you think the Squal two speed reels would work? Thanks for the video and sharing.

[@ScottBonnerOutdoors]

The two speed squalls are actually very good. Planer fishing is best using heavy gear. Going too light puts too much stress on the rod and reel

[@floydieharris6236]

When making the bridle itself are you better using crimps or knots to create your loops? It would seem over time that the crimps bearing into your braid would fray it? Also, what is your method for attaching the mainline and leader to the bridle? Thanks!

[@ScottBonnerOutdoors]

Hi I will have a video posted up on how I make it by the end of this week. I use crimps and heavy mono line for abrasion resistance

[@thomasmcnamara9970]

Great video, best explanation and covered all info

[@ScottBonnerOutdoors]

Thomas McNamara thanks for the positive feedback. I hope this video ends up helping a lot of people

[@24012780]

Thank you for the video, I tried and it's work for bottom species also

[@ScottBonnerOutdoors]

Awesome thanks for letting me know! Yes this works great for trolling shallow water grouper too and other species

[@mickkollins]

Great Post..THANKS! I had my first go with two #3 planers yesterday on the northside of St thomas, VI. No bridals. Both got SO FOULED...watched another video and the guy said he never runs 2 planers at the same time for just this reason...Had to learn the hard way! First time in years there's a ton of seaweed just offshore in 145ft of water. Re rigged no planers... with a blue and white 4oz. sea witch wired up with a ballyhoo...BOOM small 4 lb. Mahi. Next time I'll try your long leader on a hand spool Scott... But my question is this once the fish is on the hook and when the planer hits the rod tip and your start hand lining the leader onto the big spool..you say just let the line drop back in the water till you get your fish in the boat?..Why does the thought of 100ft of 150lb mono in the water anywhere near the prop scare the hell out of me. Thanks again for taking the time to do this video.

[@ScottBonnerOutdoors]

Thanks for such a detailed comment I love reading these. As long as the boat is still in gear the line will be perfectly fine. I will say however that if there’s a big crosswind it’s much harder and more risky but I’ve personally never had a problem

[@anthonypolizze4059]

Great job on the explanation of these tactics. I just purchased two 30 wide conventional reels and they have 40 lb mono on them. I was contemplating adding the 80 lb braid for in line planer fishing but seeing the 3rd example really allows the use of any rod which is a much better option. Should I add the braid to those 30 wides? I fish braid on all of my spinning reels but not sure why everyone is going braid on trolling outfits as an extensive long shock wind on leader needs to go on anyway. I want to stay as versatile as possible on those 30s. Much appreciated and wish you all the best. Tight lines from The Florida Keys.

[@ScottBonnerOutdoors]

Anthony Polizze I would leave your 30 wides as they are and try the cleated planer option first. If you find that you prefer the in line planer methods better then yes you will have to add 80lb braid. Leaving the 40lb mono is the best option if you can do that

[@aquafishingchannel3942]

Holly. That is a great video. Thanks

[@ScottBonnerOutdoors]

Thanks a lot! I love getting feedback like this

[@mrice4879]

Great video. Do you have a preferred speed do you like to go for Kings

[@ScottBonnerOutdoors]

5-6 mph trolling lures with planers. Adjust speed accordingly

[@BobbyHarvey-op4wn]

Well done! Thanks!

[@ScottBonnerOutdoors]

Thank you!

[@lv2mine]

Great video I learned a lot. You gave excellent instruction. Thanks cant wait to try these methods. Oh I subscribed! Cheers!🐟👍🍻

[@ScottBonnerOutdoors]

Thanks a lot and good luck out there

[@e4ezzat]

Great methods... I just would like to share a method it is used in my country ... we use the red color Yo-Zuri board that comes in different sizes for different depths. Once you catch a fish it will flip and comes to the surface. The main line is attached to a bungee rope hooked to the cleat. Once the bungee stretches, we know there is fish hooked.

[@ScottBonnerOutdoors]

That’s an interesting idea. I’m going to look into it thanks

[@derylsmithc21]

@@ScottBonnerOutdoors I cut strips from tire inner tubes about 1"x12" to 16". Tie the planer line on each end of the rubber with several inches of slack drooping between the two ends. When the fish hits the rubber stretches and the slack disappears. I've used technique #1 for ages but interested in #3. Reel folks say don't used over a #3 planer in technique #1 but with technique #3 I can use larger planers.

[@digginit6461]

Is planer fishing ONLY for offshore or can it be used in any form inshore like around pine island sound and what kind of fish? Thanks for an excellent video.

[@ScottBonnerOutdoors]

It can be used for both inshore and offshore but it's typically an offshore method. Anytime you need your baits to be below the surface a planer will get you there

[@leiderposso7396]

Dam man awesome video, i really apreciate all the time you took to explain all methods 💪🏼💪🏼

[@ScottBonnerOutdoors]

Thanks for the comment and no problem! I enjoyed making the video

[@sunilramnath9660]

Excellent Video again!! I have ne question tho:: So I have 100lb Power Pro 8-strand braid attached to a 200lb bridle for the Planer onto 100ft of 100lb monofilament leader (didn't have 60lb) onto 10ft of 60lb fluorocarbon which attaches to the lure. The Question is, would it be advisable to attach a snap on swivel at the end of the 100ft of 100lb fluorocarbon leader to connect to the fluorocarbon and lure?? Reason being that it would be easier to switch the lures; you can have your lures rigged onto 10ft of Fluorocarbon, neatly wrapped and stored in a bag. In this way you do not have to cut the mono leader and tie on a new lure everytime you wanna switch the lures.

[@ScottBonnerOutdoors]

That would work perfectly fine and I do it a lot for trolling for easy lure changes. I do prefer to use the least amount of terminal tackle as possible close to the lure or bait though. 10 feet should be plenty

[@marcosgonzalez6545]

Spot on the information I believe we are going to need. Thanks

[@csuitecharters677]

Really appreciate this tutorial, thank You !!!

[@ScottBonnerOutdoors]

You're very welcome!

[@jimdrechsel3611]

I noticed when you use the 3rd method you used a spin cast reel. What setup do you use when using a spinning reel? Can you or have you tried bending the planer to steer out away from the center to move the line away from the motors? Thanks again for sharing

[@ScottBonnerOutdoors]

I use a spinning real using the third method because I prefer using spinning reels any chance I can. If you’re using a rod to pull the planet itself you must use conventional

[@ScottBonnerOutdoors]

Also I have not tried that but it sounds like it could work

[@sifu1965]

Thanks for taking the time to make this, new sub here!

[@ScottBonnerOutdoors]

Thanks for the sub!