Obtaining FLAWLESS Surface Finishes on a Lathe | Works of ART Compilation

Machining on Doosan Puma 2600SY Lathe. Incredible Mastercam Processes. Speeds and Feeds for Kennametal Tooling Included for following materials, 360 Brass, White Delrin, 6061 Alum, 1018 Steel, 4140 Steel.
Help us fund FREE Education by purchasing tools seen in our videos here:
TITANSofCNCTooling.com
FREE CNC Machining Academy:
rebrand.ly/TiAcademy
FREE Aerospace Academy:
rebrand.ly/TiAero
Subscribe for daily content and expert knowledge: rebrand.ly/SUBTITANS
___
___
FREE CNC Machining Academy. Join the Revolution:
rebrand.ly/TiAcademy
Follow us on Instagram:
rebrand.ly/TiINSTA
Like us on Facebook:
rebrand.ly/TiFACEBOOK
Join the conversation on our Facebook Group:
rebrand.ly/TiFBGroup
Connect with us on LinkedIn:
rebrand.ly/TiLINKEDIN
___
___
THANK YOU to our Partners who make this content possible:
Kennametal - rebrand.ly/TiKennametal
Doosan - bit.ly/DoosanTiYT
United Grinding - hubs.ly/Q013zHpC0
Mastercam - rebrand.ly/MastercamEDUTiYT
Blaser Swisslube - rebrand.ly/TiBlaser
Tormach - rebrand.ly/TiTormach
Solidworks - rebrand.ly/TiSLDWRKS20
Trumpf - rebrand.ly/TiTRUMPF2022
Trumpf TruMark - rebrand.ly/TiTRUMPFTruMark
Trumpf TruPrint - rebrand.ly/TiTruPrint
Markforged - rebrand.ly/TITAN-Markforged
Tyrolit - rebrand.ly/TiTYROLIT
Mitutoyo - rebrand.ly/TiMitutoyo
Haimer - rebrand.ly/TiHAIMER
LNS - rebrand.ly/TITAN-LNS
FANUC America - rebrand.ly/TiFanuc
Schunk - rebrand.ly/TiSchunk
ONA - www.ellisontechnologies.com/t...
#CNC #Machining #Machinist

[@Nextlevup]

Machining can be hypnotizing and specially turning

[@orangehammock]

you should probably change the title of this video

[@adm2765]

i was expecting some surface feed insight or something lol

[@methanebomb6168]

I finished up a brass job that had multiple 32 micro callouts. very satisfying

[@iBECKENGINEERING]

Good job

[@d.k.1394]

All very pretty

[@Qui_Gon_Ben]

Very informative.

[@karangovekar5477]

Can we have 12 micro inch surface finish for cast iron jobs while using cnc turning? Bcoz right now I use a centre-less grinder for the surface finish.

[@GhulamHussainEngineeringWorks]

Waooo good speed 🚅🚅🚅🥳 machineing

[@empireages241]

Hey Titan ! How you choose your spindle speed limits when machining ? You just go with SFM and machine limits or you limit the spindle max speed ? If so, how you choose the limit with a random part ? Thanks !

[@Turboy65]

Next on How It's Made: The Plumbus. Some of these parts remind me of that.

[@owenridgway8049]

Make a video about cutting acme and metric trapezoidal threads

[@VG-rj8pn]

Not one word about obtaining a good finish

[@mikeblankenship7930]

Use a cermet insert @ .002 DOC and .003-.005 feedrate.

[@TheVist7]

Best way to obtain a good surface finish? Get a good cutting tool and good insert!

[@andywilson5264]

Yeah right!

[@d.k.1394]

Need top lubrication for best surface finish

[@tylerakerfeldt7220]

Parting blade montage

[@domkiller357]

1:38 is still turning operation?

[@u.e.u.e.]

Did you ever finish a mirrorsurface on metal in a lathe with diamond? 😎

[@u.e.u.e.]

@TelegramTITANSOFCNCMACHINEHello, what is a shortlisted winner? 😉

[@karangovekar5477]

@@u.e.u.e. yes even I got the same message

[@keithdahlberg7146]

We run parts that need a 16 micro finish. Easy with the right insert and good steel. Have to polish almost every part cause our buyers get the cheapest shit they can find. It's called "strategic procurement".

[@avroarchitect1793]

sounds like you guys are wasting money on extra processes from using sub optimal material. Those extra labour costs almost certainly outweigh the extra cost of suitable material.

[@knuckle5911]

How about all those giveaway?

[@GhulamHussainEngineeringWorks]

Parting tool great working

[@ranvijayjaiswar9041]

Which company provide best Turning Centre??? According to You. For ex. DMG Mori, Doosan etc.

[@MrKio415]

Mori Seiki should be at the very top, come with high price tag but built like a tank and hold 2 micron tolerance daily basis. DMG Mori is one tier lower than Mori Seiki, and perform similar to Doosan, Okuma, Nakamura-Tome, Matsura, Mazak, Hyundai, Samsung/SE.

[@elvirathon]

@@MrKio415 we have 4 mori seiki , 2 doosan puma, 3 youji, 6 or 8 haas lathes. Mori seiki are best out of all those i have tried

[@MrKio415]

@@elvirathon Haas lathe doesn't perform as well as the pack, the only good thing is you get support/parts in a day or 2.

[@85CEKR]

@@MrKio415 we have okuma and mori in our shop Okuma is better in every way than mori

[@85CEKR]

For turning you can't beat Okuma, nakamura is pretty great too, and Samsung as they are literally old Mori's before they got crappy

[@rickdonegan518]

How do we?

[@StuPid3032]

Since titan wont say, I’ll help. First, you spend 500,000,000 on a lathe….

[@spicyandroid2933]

How dose this help anyone

[@dillongreen1045]

Best way to obtain a surface finish? Hell we don't know look at this video 🤣

[@robertlafnear9115]

Bet I could put those new Calipers? ....to good use on these parts,.......that somebody said I won ?😮‍💨................. I will also ponder this in my spare time.😁

[@LucasBakker]

How the hell did they get that plastic (POM I guess?) To break chips??? Pleeeaaaase make a video on turning plastics. I hate those long chips that just wrap around everything and cause damage

[@ottoernstsen]

Lucas, try this for POM: for roughing od's 0.3 mm/rev feed, 3000some rpms, depth of cut as much as your insert will take. leave a mm for finishing with 0.1 mm/rev for a decent 3.2 ra. no stringy chips, no worrys.

[@LucasBakker]

@@ottoernstsen So basically go ham on the Depth of cut to break those mf'ing chips 😂 thanx man appreciate the feedback

[@d.k.1394]

Take your time

[@ulugbekmuhitdinov2663]

🤝👍🙋‍♂️🇺🇿

[@pradeepsinghrathore989]

How to overcome ovality? Material- Alluminium

[@viswasnadella8983]

HELP ME SIR

[@loonewoof9074]

Rename title ASMR CNC lathe

[@divorcedmoms2260]

No coolant??

[@masondebrick3642]

It's for the video, they usually say it in the video, but this is a montage so I guess they missed it out

[@saram9590]

Great question! Coolant isn't used in the videos for filming purposes. We want our audience to have a clear view of the action. -Community Coordinator Titans of CNC

[@tommytwotimes2838]

honestly I'm not impressed. Show me the tolerances and surface Ra and Rz

[@johnkeefe20]

Right on. These are the critical specs that a machine shop needs to work to. I know we are showing the process, but no coolant? Surface finish is a function, in a geometric sense, of feed and nose radius. Many, many other factors then come into play like material type, hardness, and machine construction. If we ran 5 different materials with the same process parameters they would all have different measured surface roughness. Also, do any of the machines have an ultra-rigid headstock? If I needed to get an awesome finish my manufacturing process would include in-process burnishing.

[@Stasiek_Zabojca]

Why do you have to be so clickbite? There is no answear to title of the video, just some random clips put together. Titans, wake up before it's too late and you loose too many viewers!

[@miguelderas5105]

A face grooving tool

[@ambydaly5713]

Surface finish is governed by the drawing specification. There is no point in trying for 10 micro finish if the spec is for 63? Most manufacturing today is specked using SPC. So all parameters especially tight tolerances should be specked using SPC.

[@d.k.1394]

I am fussy

[@viswasnadella8983]

help me

[@StuPid3032]

I am here to help

[@viswasnadella8983]

@@StuPid3032 sir my for name is viswas .i win 2 give away challanges one is mitutoyo dimatic caliper and one is harvi 1 te cutter ,ibut i belong to INDIA .they said only US persons can got this items .as titan was great, they said are you from india even though i give u items ,i said thank u sir. next titan sir said ,but shipping charges must be our own i said k sir , but shipping charges was 40$ . i said sir dont have enough money to pay shipping charges . pls any one help me for shipping charges,

[@saram9590]

@@viswasnadella8983 The person you speak of was a SPAMMER! Titan's team will always state who they are and we will not ask you to pay is for a contest giveaway. This imposter has already been removed from this page. If they are still trying to contact you, it's best to block and report them. We apologize for the confusion.

[@d.k.1394]

U can't be sandpaper

[@BPond7]

Step 1: Don’t buy a Mazak.

[@pradeepsinghrathore989]

Why?

[@BPond7]

@@pradeepsinghrathore989 In my experience, they don’t have the longevity or craftsmanship of other machines. Getting them serviced takes far too much time and effort. To top it all off, the control is very cumbersome to use. Searching for a line of code to edit, is a needlessly complicated production. I’d buy a ten year old Haas, before a new Mazak.

[@pradeepsinghrathore989]

@@BPond7 Which controller you used on mazak? And Currently I am using mazak Smooth G and X in my company and i feel it too easy to use

[@BPond7]

@@pradeepsinghrathore989 I’m afraid I don’t remember exactly. The Nexus something or other.

[@85CEKR]

Lol so true