TIVDIO Keypad RFID Access Control System

www.aliexpress.com/item/SIB-W...

[@danbarnett360]

Very helpful thank you!

[@leogao7724]

good demonstration

[@cirocalcagno3625]

Hello. Is it possible to reduce the opening time of the door? I am not referring to the delay time but to the time when the green light stays on. Thank you Ciro

[@leonidasgr2003]

what power supply requires ? an electric transformer DC is required or it can have electricity directly from the electricity lines or door bell ?

[@sombra81g]

I can put another card reader, what model do they have? Thank you Traducido por google

[@jeromeswaby5261]

Hello there I need some help I have the same power supply and mag lock that's in the video I'm installation it on my gate the drive way is about 100 feet long from the house when ever I try to ring the door bell from the gate it doesn't ring and the mag locking force is weak the wire am using is CAT 5 and the power supply is in the living 5AMP power supply am using!

[@michailvlassov3488]

is it possible to connect two RFID Readers in parallel?

[@agustinalmada1086]

Hello, I want to load an rfid card and the code is 10 digits and the access control only allows me to place 8 digits. How can I load it manually with 10 digits?

[@blue9715]

Quick question. I want to add another RF relay to this system so that its controlled by a remote as well. How do I go about doing that. When I connect the second relay the access control system just turns off🥲. No idea what im doing wrong.

[@jeromeswaby5261]

Hello there I need some help question if I lost the RFID how do I delete it from the key pad so i have to have the RFID to swipe it at the key pad to deactivate it

[@najibenabdou]

How can i change pin registred??????? Plese answer .thanks

[@voodyczcz]

Hello, can I turn off the backlight?

[@MisterDoublep]

Can I delete a card or token with its number if lost please ?

[@igorgelzin2657]

Can i open two door wis retekess wis one chip?

[@syedalihusnainnaqvi2451]

How to change pin code for existing user?????

[@ceesvandewouw2022]

card delete op nummer zonder dat de kaart aanwezig is (verloren)???

[@itie2272]

Woran hast du den Controller angeschlossen?

[@davidhinman1772]

Is there a set of printed instructions that I can print out please

[@sushilkamble11]

are the keys metal or rubber?

[@uhby6297]

There is a video from Lock Picking Lawyer that shows these locks can be opened with a magnet.....

[@BadenBadenSwitzerBaden]

The video you mention is [1064] First No Touch Open! (Retekess Keypad), and it is clearly not the same lock.

[@AJ-Palermo]

You can open this lock and most similar models with a magnet, and almost any of them with a screwdriver.

[@saifars]

HI want to know how to delete the existing user, it is 4170#, I have set new one, I want to delete the existing one. please let meknow thanks

[@user-gn8yg8lf6i]

Hello? I lost my password. Keyfobs in operation. However, it does not work with the keypad. how to reset it.

[@hamzanofal6118]

How can I delete the blue tag by the tag number?

[@malikakerroumi4806]

Please how I can remove a code I added it manually

[@ZAACPOKER]

How do you reset master code?

[@adnanrencber7041]

Why not read the card? How to reset device?

[@fernandovergara3119]

Noo Toto matemática cuenta sordo noo Toto

[@dearose3383]

How to make the door open at long time.

[@kabrida]

How to change the master code !

[@svetlost016]

How to change jus pin?? Default pin for me is 5678# and you can enter by entering PIN or by CARD. But in user manual there is to set PIN for PIN AND CARD enter not jus PIN for Pin or Card.

[@shomi75]

To i mene interesuje. Da li si uspeo?

[@raedsawalha]

I have three keypads i need to change the access pin what id the steps please , i can can access using card and pin

[@SergioSaray8001]

Hola hola. Muy bueno el vídeo. Los felicito seguir así. Ayudan a muchas personas. Yo tengo una inquietud y una duda. No he podido borrar un código para poner otro ( cambiar de código ) Ustedes me podrían ayudar.

[@MrNordicRules]

How can i delete a tag that is lost?

[@user-jz4ke9nd5s]

And how are you gonna restart all?

[@wermeir]

can I program it to remain unlocked indefinetly so I am controlling a relay.

[@323compa]

you need the contact to either close or open, and the color wire?

[@AlessioIannone77]

On the video first the blue cable is connected on the push and after the orange one....which one needs to be connected?

[@AlessioIannone77]

I will answer in my case it was the blue one....I don't know why on this video first was shown the blue and after the orange one....with the orange the lock stays always open

[@ammaralshuaibi6157]

I have this system in my office but the sound it's very loud. How can I stop it or reduce it?

[@mjyanimations1062]

you can crack it open and remove the buzzer. preferably desolder it

[@loveammar557]

How can i delete the pin code ??? I want the answer as soon as possible

[@olivierlamipapi3772]

hello, how do I connect the doorbell, it does not work only with the pink wire, how can I do it?

[@mcduarte2000]

Could you solve it? I am having also a doorbell problem...

[@hamzanofal6118]

How to delete the user by card number?

[@shannonbreaux8442]

Is it possible to make the red light solid instead of flashing ?

[@albialbi2274]

Hello, Questions: 1) can exist at the same time guest that can access only by card, guest that access with card and Pin, ang guest that have only the Pin? 2) to delete a person that have a rfid card, should I have the card or I can delete it without having the card?

[@MisterDoublep]

Hi you managed to delete a user without a card ?

[@jeromeswaby5261]

@@MisterDoublep good question what's am asking and on one can answer that question

[@kyleedwards8658]

Hi I purchased this and everything is working , but when I shut the door the keypads lights up red and I can't open the door. Any idea what it could be ?

[@sulmaniatrader707]

Sulmania Traders 👍

[@retekessaliexpress4451]

Thanks

[@JNCrypto1]

Is there a way to reset the master code, or factory default the unit?

[@jovandievski9116]

yes you prolly found it by now but there are codes for reset and master code which can be changed

[@juandelpueblo2944]

Hello. May be you can help me. Which is the code for reset the system? “Factory reset”.

[@ZAACPOKER]

What if the master code was changed and forgotten

[@daxliniere]

What information from the RFID tag/card is used? Is it serial number or some other data? If it is other data, then keeping a duplicate tag/card would allow me to delete a tag if it becomes lost/stolen.

[@daxliniere]

@@retekessaliexpress4451 Great, thank you. Can you post a link to the manual as PDF, please?

[@kanalord4134]

Can we make this keypad totally silent, the beeping is too loud. Neighbors will know when I leave and come in.

[@michaeltorvinen6131]

If the piezo speaker is accessible putting a piece of aluminum tape over the hole will make it much quieter.

[@zaayizaayi4036]

With out condroler l working that device

[@josesanta3478]

Hello, I forgot my master code. How can I change it? Thanks

[@HDXFH]

Power keypad off and back on while holdibg the hash key

[@mskrashed5585]

Full fixing video please

[@moimeme6782]

Comment brancher une fermeture électromagnétique ?

[@FranckStalone]

Le principe reste le même, il suffit de brancher a la place de la gâche électrique, une ventouse électromagnétique. Pour en savoir plus, suivez le lien @ElectricByFrancko m.kzbin.info/door/iWKy-M99aeHVyJIHiYNDYg

[@alexrodz3982]

I need delete code or factory reset completely

[@josesanta3478]

Did you manage to do it?

[@Dory222]

The text at 1:49 is wrong. It refers to a red wire but the video shows a black wire. What does the black wire connect to?

[@Dory222]

@@retekessaliexpress4451 [e-mail]

[@lucasryan8879]

@@retekessaliexpress4451 can you send it to me as well [e-mail]

[@moimeme6782]

Hello ! Can you send me the connect picture ? Thanks [e-mail]

[@clarencejoyfelicitas7792]

How to delete old pin code and set a new pin code?

[@jovandievski9116]

Factory reset them input new code :)

[@jezreelbonotan5241]

How to delete the code

[@nothappy_]

Can you change the master code?

[@foxwitme51]

Yes

[@foxwitme51]

Yes. Press 0 than your new code(6 to 8 digits) than press # new code than #

[@user-jz4ke9nd5s]

I want to delete the pin

[@redouaneremam8275]

Merci comment désactiver le code d'accès merci

[@najibenabdou]

Yes? How can i delete only the code pin? Please.

[@saifars]

@@najibenabdou Even I want to know how to delete the existing code.

[@irnickkkknowles]

Never buy a keypad without a technical support you can't contact

[@philippedubuc7364]

Toujour pas de notice en francais domage

[@silviotancredi423]

Italiano no????

[@faustotosatto670]

Ciao. Sei riuscito a capire come si fa a cambiare il Pin?. Grazie

[@malikakerroumi4806]

Please how I can remove a code I added it manually