This is a knife design that grabbed my attention so hard I had to have it. Stumbled across a KZbin short with one and fell in love. I was dead set on a different knife I’d been lusting for over a month and this knocked it out that quick. Damn nice work.
@Tenskwatawa4U4 жыл бұрын
VERY sweetly done! Someone finally did the choil right.
@danielmccoy10214 жыл бұрын
Your work is amazing not only does it look great all the little details actully make a huge difference and these have definitely become my most favorite knives
@abc456f4 жыл бұрын
I think this one is your best design and obviously well executed. I've held off the other tkt knives, but feeling pretty compelled to pick up the cf/satin model. Love the generous choil. Well done sir!
@OsamaBinDarrel4 жыл бұрын
I love all the Todd Knife and Tool designs you guys are awesome 👍
@TheKnifeJunkie4 жыл бұрын
Congratulations Zel, these are absolutely beautiful!!
@neilzberry4 жыл бұрын
Exceptional knife! Can't wait until mine arrives.
@patrickvanovermeeren45134 жыл бұрын
Awsome knife . Great design , beautifull execution !
@kenmarapese90854 жыл бұрын
I don't like sharpening choils for the reason you left it out, thank you!
@TripleEEDC4 жыл бұрын
The price is $246 on White Mountain Knives. It’s not in BHQ yet. WMK will also give you a 10% discount. I love the logo on the pivot! The forward choil looks just as comfy as the Roxi 4 (maybe even a little bigger. I also love the silver version. They all look great but the silver looks amazing.
@edwardyork43214 жыл бұрын
Congrats on these BEAUTIFUL Blades 💚💚
@daveeverett93414 жыл бұрын
Remarkable to see a folder this size that is such a beautiful blend of looks, form, and function. A winner that I can't wait to find in the Satin / CF version! Love your reviews, man, and thoroughly enjoyed the interview with Bob Demarco on Knife Junkie!
@XrayMike17plus12 жыл бұрын
Well it's 2/10/22 and finding the grey all Ti appears impossible. There's still availability on the 2 black versions. Found a stainless CF/ Ti version and bought it . Extremely interesting design. Can't wait to get it in hand.
@genoedcknifecollecter15384 жыл бұрын
In canada shodan black with fiber is 459 bucks I think I might go for. That fiber with all black looks so dam down right nice. I love how the pivot pops. I also have your roxi 4.
@rickkerans84854 жыл бұрын
Great looking knife. No one has any right now. Smokey Mountain did but sold out when I looked. Price isn't bad for that quality of knife.
@mannyz53074 жыл бұрын
$246 at White Mountain Knives. Nice EDC. I'll take one with that carbon fiber. $230 for the gray titanium.
@Zelrick424 жыл бұрын
Thanks Manny!
@bennythebossstk2094 жыл бұрын
Oh my gosh Todd I flipping dig it. I’ve got to have one. You did a great job in my opinion. I luv it. Thank you for sharing. That’s my kinda knife.
@areuaware68424 жыл бұрын
Wish the Roxy 4 had this handle shape. I understand why it doesn't but still would like a swell at the back end of the handle on the Roxy 4. Nice work. I'm more likely to get the Shodan, due to 2XL hands.
@jtucci57114 жыл бұрын
$230-$246 and WMF is out of stock with the exception of the Black with CF model. Why the shortage on a new run, just curious. Just a note on Bestech marbled carbon fiber models. I purchased the Bowie Tie with marbled carbon with brass shreds in it and not only were there some divots in the CF the show side of the CF was glossy and the clip side was a flat finish, not sure why they have issues with this material but this is not the first I have heard of the problem, it is a otherwise beautiful knife. Cheers!
@bubbapeppers43544 жыл бұрын
Got my blacked out "stealth" version today... you and Seth done good!!! White Mountain has them from $230 to $245 depending on the version. Is the Rootkit going to be this good lol???
@Zelrick424 жыл бұрын
Root kit this good? Yes. Enjoy the knife, stealth is my favorite version😁👊
@bubbapeppers43544 жыл бұрын
@@Zelrick42 Lovin it for sure!
@efcruzado4 жыл бұрын
A lot of details to take in on these knife designs. Awesome job! 👍🏽🔪
@jcb67134 жыл бұрын
nice looking design !!! got one on the way :-) ...
@nOObels14 жыл бұрын
All black carbon fiber will be mine soon what a beautiful knife 🔪💣
@kenw54373 жыл бұрын
Hi, What’s the smaller knife near the end of the video? Thanks
@kenw54373 жыл бұрын
Hi, Is it possible to get a replacement clip for the Shodan without the scallops/cutouts on both edges? So, with just straight edges? Thanks
@blwngt15984 жыл бұрын
As far as the sharpening choil topic is concerned, I can see both sides of the argument. So just out of curiosity, instead of a sharpening choil where the edge intersects the ricasso couldn't the edge be extended down ever so slightly more than the ricasso, esp with a big finger choil being aft of the edge/ricasso intersection? It would make sharpening a bit easier yet wouldn't get hung up when stabbing or deep blade cuts like a sharpening choil could, would it not? *side note* I'm really digging this 1! You guys made another good looking piece which just so happens to be at the top of my "knives to purchase" list when able. Well done.
@XrayMike17plus12 жыл бұрын
3.85 inch blade length is good but lately I've alo started paying a lot more attention to blade height not just length.
@knife_knut6 ай бұрын
I like that they’re all T8 screws
@VOIDVIDS2 жыл бұрын
love my malware but i wish it also had a full sized choil like this
@MooMyung21464 жыл бұрын
The only place I could see them are on white mountain knives, $230 for titanium $246 for marbled cf, Slicey Dicey just did a review before you and you can use his code SDWMK for 10% off at checkout.
@XSourStarX3 жыл бұрын
Is the shodan discontinued? I like it more than the exploit but the shodan is sold out everywhere
@Zelrick423 жыл бұрын
No, There is a production run ordered, but with the way things are right now, I don't have an availability date.
@gladius12754 жыл бұрын
The Shodan would be a perfect knife to off in a left handed variant. Is that possible?
@gladius12754 жыл бұрын
Zel, any chance of a left handed version of the Shodan? Just picked up a lefty Malware (awesome) and would love this one lefty too!
@wolfdna7884 жыл бұрын
It’s so beautiful
@danielmccoy10214 жыл бұрын
The thing that makes me mad is the fact there are so many designs and I have to try to explain to my wife why I need 4 OF THE SAME KNIFE....HAHAHA I love these and havento have all the designs. I love everything about these
@Ty916814 жыл бұрын
Can't wait to get mine this week
@floorguys01504 жыл бұрын
i LIKE IT.. reminds me of a Strider 🤘🏼
@abc456f4 жыл бұрын
Definitely. Since I can't find a strider, I just might pick one of these up.
@floorguys01504 жыл бұрын
mr. jinks yea.. dont see them in stores anymore.. ive got both the SMF and SNG .. theyre great knives think i want 1 of these too now
@mikeprice30644 жыл бұрын
Tough looking machine of a knife Zel, waay cool piece.
@mj16534 жыл бұрын
love the design, wish it were a little smaller though.
@Tenskwatawa4U4 жыл бұрын
I thought "Shodan" was the daughter of Rodan.
@CloudyShinobi Жыл бұрын
Why in the world would you ask them to put their branding on the show side of the blade?? What a bizarre decision, never heard of any knife collector that doesn’t prefer a sterile blade, sans billboarding. Totally perplexing decision that hurts the aesthetics imo Also not a fan of the huge lanyard hole, it’s not hidden at all and again it hurts the aesthetics
@mikehinnekamp4 жыл бұрын
I like the knife, but overpriced in my opinion for a Chinese S35VN knife. Malware is about the top of my import knife price range.
@Aviation_Professional Жыл бұрын
The edges are harsh and not contoured for the price. Maybe in 2023 it's better
@abc456f4 жыл бұрын
Ordered one based on its good looks, got it, and returned it the next day. This knife needs some serious surgery from Dr. Chamfer. Sharp edges on the scales all around. Even the landing area for your finger when you flip it open is sharp. But what I find sharp, someone else might not so I wouldn't say don't buy it. Just get it from a retailer with a good return policy. Got mine from White mountain knives and they refunded my money before they even got the knife back. If they came out with a v2.0 with chamfered edges, I'd buy it again as I really like the aesthetics.
@Zelrick424 жыл бұрын
Mmm... the CF models need a few days of use, they are a bit sharp out of the box. But, they wear in nicely. I was concerned even I received the first CF model, so I carried and used it, at about a week, it was all good. Designed for use, not pocket jewellery.
@skydiverbob14 жыл бұрын
I would love this knife even more if you hadn't put those three little drilled holes in the handle. Why did you do that??? It actually takes away from the looks!!!
@Zelrick424 жыл бұрын
T³ it's a thing between Seth and I. All TKT knives will have a triplet of something. Three most basic of which is the line of 3 chamfered holes. Roxi has a line of 3 unnecessary screws in the back spacer😱. (One would have been plenty. )
@TheSgsgsgr4 жыл бұрын
@@Zelrick42 I just received the knife, and I love it, and I think it looks really good with the three holes, great looking knife.