The COOLEST and LOWEST WPL i've ever built! LCG WPL C44

[@loknlode]

I've never really been into crawlers until I've watched a couple of your videos. I think I like the scale/detail of these little ones!

[@DoURC]

Great video and that thing looked absolutely awesome, love it. 👍 Spring Woods looks like a great place to go too. 👍

[@TomleyRC]

Yes, it’s a really nice place

[@disciplinerc]

Great build! The music got me right in the feels...nicely done! 😎

[@mikeupton5406]

Watched going back to watch again. Really like your WPL stuff.

[@TomleyRC]

Yes, it’s nice to get some WPL content up again

[@theminiatureconstructionco4556]

The coarse looks very entertaining, loads of effort been put into it! Like the ammo / battery box, this 3D printing seems to be where it's at! 👍👍

[@TomleyRC]

Cheers mate. Yeah, my first time there, will certainly go back

[@rcmakingtracks18]

That's a good looking and performing truck, great job. Some nice camera work too. Well done. Thanks for sharing. John

[@TomleyRC]

Thanks John

[@SpringWoodsRC]

That's awesome that you just built that to come here 😊👍 awesome footage love how b,a is in there 😂 lads did a great job organising the event looking forward to next one, thanks for visiting an the shout out Phil was a pleasure to meet you😊👍

[@aspectcarl]

neat, look forward to seeing the next generation lcg 👍 I had a great time at springwood rc, really looking forward to the next visit

[@micahwhite7484]

"YOU WEH ONLY SUP-OSED TO BLOW THE BLOODY DOORS OFF~~~" Really, really great course, and some of your best action shots I've seen yet!

[@derricksazrc3411]

I love what you did with C44. What a successful transition. LCG is so much fun to tackle challenges with. That was a pleasure to watch.

[@TomleyRC]

Yes, it’s a whole different technique… but good fun!

[@rustytoolman4912]

Oh thats funny, I find myself groaning out loud and moving around when you rolled down the hill :) The WPL trucks sure look like a lot of fun!

[@GC-RC]

That's a beautiful crawler compound. You guys across the pond have got it made when It comes to rc. I just finished a c24 lcg, capable and different. They're great to look at too! Thanks for the awesome videos! 👍🏻👍🏻

[@TomleyRC]

We have some nice locations over here… but you do also 👌

[@MrStupidpuppy]

I absolutely love that wpl is proving to be a capable company... Their rigs have come so far so fast... My buddy and I are actually doing a build of with C24s... With a budget of $150USD, an impossible feat with many other crawlers...

[@mehimrc1314]

Well done Tomley that's a wicked build and very creative transforms the original.

[@TomleyRC]

Cheers mate… was a decent few hrs playing with other grown ups 😎🤟

[@MCsCreations]

Awesome meeting there, Tomley! 😃 I would love to have something like that here in my area... So I just searched about Brazilian Facebook groups to join... And I found one! 😃 With 12 members... 😂 Anyway, stay safe there with your family! 🖖😊

[@TomleyRC]

Well 12 is better than none lol

[@MCsCreations]

@@TomleyRC oh, no doubt about that! And I joined!

[@geraldgerhardstein2170]

Very cool 2 hour rig !! Its amazing what you can do if you cut the nitty gritty and get down to it. Excellent video! JP

[@VermontScaleCustoms]

Glad you made it out for the event! the C44 looks like it runs really well on the 1080.

[@fattractor9214]

You should do a video on the best rc cars for beginners love you work keep it up The Fat tractor.

[@TomleyRC]

Yes, I do have some videos planned

[@fattractor9214]

@@TomleyRC I’m looking for a rc rock crowler and was looking at the rock hobby Toyota Land Cruiser and have been enjoying your videos for a few weeks and have been enjoying them a lot lately Keep going with the good stuff The Fat tractor.

[@Bradkozakandfriends1830]

Turned out great for two hours time. I never would have thought to run w/o springs. Worked surprisingly well. Another great video.

[@Garetschuurman7]

Happy to see another video

[@TomleyRC]

Thanks dude

[@partyboy16v]

The Super Turbo with Moog and Marty in the Background Nice!!

[@michaeldorich4485]

Looks like a lot of fun and a very cool course. You crawler performed well. Thanks for sharing.

[@scottydoo46]

The couple that own and run spring woods are the nicest people too, great place

[@3Y3ECE]

As a WPL fanboy im super excited to see this, as well as what you do next to it!! Great inspiration!! Great work!!

[@TomleyRC]

Thanks dude

[@benfred8]

Most amazing crawler course

[@TomleyRC]

It’s awesome!

[@BangForYourBuckRc]

Excellent job Phil for such a short amount of time! Your low CG rig looked super and performed really well. No such event like this in my neck of the woods! Such a shame!😕great video bud! Thanks for sharing!

[@bretthastings8857]

That truck is ace,have you ever been to Carnaby crawlers,they have a full rc set up,boat lake,buggy track,massive crawler setup and an area dedicated to trucks and lorrys

[@TomleyRC]

Never been… but sounds really cool!

[@adamginn6212]

You have a might car mods poster in your office nice I watch them guys alot here in Australia and seeing this video makes me want to get my wpl going

[@TomleyRC]

Yes, love MCM… been watching them for years

[@ungratefulbastard8166]

I like this relaxing and entertaining RC video bro , thank you , Love your channel , is unique!

[@TomleyRC]

Thank you. I tried to be a little different to the norm.

[@Del350K4]

Well done, Phil! It's really cool - and so's the green one.

[@TomleyRC]

Thanks Del

[@alantaylor353]

Yeah, that was very enjoyable.. Thanks Phil mate... 👍

[@TomleyRC]

Cheers Alan

[@Mrperfectica]

Great video love the crawling! Excellent work!

[@integrityrc7356]

Well done mate. 🕺💥🕺

[@cliffordmazzorana595]

Mighty car mods yeah boi!! Keep up the good work mate

[@TomleyRC]

😎🤟

[@roblowrie1969]

I've not ventured into the WPL world yet, but I might soon. That looks awesome after the mods. 👍🏻

[@TomleyRC]

Once you get one… it gets addictive!

[@roblowrie1969]

@@TomleyRC having seen your collection, I can well believe that!! 😂👍🏻

[@rcplaytime]

awesome little truck 😀 great place 😀 👌 👍 👍

[@rcwreck-creation]

Good to see ya out at spring woods! 👍 Hope you were able to meet Paul? He’s a great guy! 👌👊

[@WCPRCModelsCraft]

great trails, what a great quick build, looks awesome sitting low as hell performance was great and it looked like a lot of fun

[@TomleyRC]

Yes, not bad for a quick build!

[@kashmurray1199]

That was really neat. Good place to get lost. And nice music.

[@brianargo1659]

Tomley, I think u out done ur self this time. It looks very cool. If u leave to top off all I would do is cut that headache rack down to the solid pease and the back of the cab down to that hight also. But if u go topless. U must get that driver a hat. Lol.. pour guy!😂! Add some 80-90mm dessert lizard shocks with no springs just oil to keep that droop and LCG. That look with the wide wheel base👍 and last thing where u notched out that bed I would go from that depth and cut straight out the back towards the back bumper so as if the whole beg is the same all the way back. But possibly keep the original bed size on the section in front of the Back wheels. I hope I explained that to where u can understand or have a visual idea of what I'm talking about. But either way. Great job! The color is perfect. I can only imagine what it would look like with some proper crawler wheels and beedlocks. I would wheel that thing daily 👍 again, very cool.

[@TomleyRC]

Awesome ideas 😎👌

[@chriswhite2824]

No shocks pretty cool, top video again Phil 👍🏻

[@TomleyRC]

Cheers Chris

[@grrfy]

I said no spings worked suprisingly well!, now need try the same on the gmade ,thats how mine is running.Just add some tall tyres make up for the spring and height combined with ther inverted v rear damper setup it rocks😀

[@TomleyRC]

Yes, worked very well! I need to try a cantilever set up for the rear on this I think

[@grrfy]

@@TomleyRC I find inverted v look least realistic but work the best climbing and trail runs compare and contrast video mebbe?

[@rrrccc1571]

That looked so good on the trail!

[@dansmith5218]

Love the build idea and this video 👍.

[@petermakeithappen8336]

So I know you were pressed for time but I've seen video's on these wpl's that show you foie to get better steering. Great job otherwise I really like the build. It really shows that you doing need to spend a ton of money to have fun with a crawler

[@shadowx5648]

Greetings from manila. Nice video man!

[@TomleyRC]

Greetings 👍

[@dexterbeattie7884]

I really love it..great video

[@TomleyRC]

Thanks mate

[@sharkusd]

Beaaauuuuuuutttttiffuuuullll 😍 what a awesome c44

[@that_radio_control_guy1911]

Beautiful truck mate. I took the springs out of my wpl c24 and it drives so much better

[@verycoolthings6880]

Looks awesome! Do you still have your FTX ZORRO brushless? If you do can you make a video of bashing it or taking it out on the race track, I’ve been looking to get one and wanted to see how much abuse it would take. Great video as always

[@TomleyRC]

Yes I do still have it.. decent truck, may get it out again soon

[@vaynehowlett3091]

I really enjoyed this I can't wait to see it finished

[@Wild_Buggy]

Looks like a competitive build, perhaps you could use the springs from pens which are very soft (maybe better than using no springs at all).

[@raylansall4434]

Nice rig 👍🤪🤡🇨🇦😁🙌😀✌️👊😄🇨🇦🇨🇦🇨🇦👍👍👍👍👍👍👍👍👍👍👍

[@NCmountainsYouTubeChannel]

Wpl rocks, I’m really for another wpl vid 😀👍👍👍👌👌💯. I got to see some of these In WPL groups Aaron. U mite see my k-m C-34 I really enjoyed it ☀️

[@GSG-lc5zm]

Probably the same reason I take the electronics out.. I've got an up grade I mind but after waiting for the parts I have to "get" back to it.. instead I "forget" back to it lol 😉

[@TomleyRC]

I sometimes swap them in to other projects

[@danweiss4928]

I would definitely purchase one of them just for the fun factor

[@TomleyRC]

They are decent 👌

[@garykee1]

damn..cool looking rig and what a place to visit and take your buggy out! wish i had something like that where i live, but the nearest place would be 4-5 hours to drive. think i'll stick to my local conservation area and stay away from doggies who might chew it all up to bits. see you in the next vid! cheers.

[@mikeharlow2908]

At 5:32 I swore I heard 8s Steve from Kevin Tolbert’s channel! 😂 That’s a cool crawler and neat event!

[@TomleyRC]

Haha

[@mikebird8290]

Hi Phil the truck looks great 🇬🇧✌🏼

[@TomleyRC]

Yes, was good fun!

[@BrendonakaShanks]

I own a couple of wpl rigs now. I'm enjoying them. I just like how we can get a crawler rig this cheap and still be able to get somewhere. I have a d12 and a couple of c24s.

[@wrc_adventurehobby5242]

Very nice video friend😍👍👍

[@smallscaleadventures]

Looks great doing it's thing! I was in a bit of a world of my own enjoying the trails while you and Liam were running those I'd have love to follow you guys round with the portal equipped C44 wheelbase C34.

[@TomleyRC]

I’ll be there again bat some point. I was very impressed with all your rigs! I have some footage of them for the next video

[@smallscaleadventures]

@@TomleyRC Cheer! I'll look forward to seeing that. I'm from way down south so not sure how often I'll be able to get up that way unfortunately.

[@JamieKehoe85]

Good work. I was almost going to go but didnt. Wish i did now. The green c34 you were running with .. any ideas what tyres he had on? Im doing a build and they would bw perfect!

[@TomleyRC]

That’s owned by THYC. Check his channel out, he’ll probably have some info over there 👌

[@ryantasyo9045]

great run.. it looks cool too. btw, how many inches is your designated driver?

[@brianwoodbine2435]

Love the MCM picture

[@NoLimitRC87]

Turned out awesome I might do that to my c24 haha

[@TheRCScotsman]

I'd LOVE to have a go at a place like that!

[@TomleyRC]

Road trip to Nottingham… 😎

[@TheRCScotsman]

@@TomleyRC It might have to happen!

[@damienparker-burgess7086]

Loving the a-team vid

[@TomleyRC]

😎👍

[@calumflemingsrcs2213]

I did that with mine the flex was great but catches on a lot of things when so low! Really nice truck though nice video👍

[@TomleyRC]

Yes, you have to find the right lines!

[@stevelamothe7402]

Amazing ride u gave me an idea gonna try to take my springs off on my axial scorpion gonna test the differance to see thanks !!!! It pais to look at other peoples videos rock on the crawlers!!!!

[@Jbzy3000]

I am impressed with this thing. Lol it’s inexpensive and performs way above its weight class!!!

[@TomleyRC]

Yes, certainly performs very well for its cost

[@CentralOhioCowboys]

Looks like a great place

[@TomleyRC]

Yes, was awesome!

[@pinkze]

pinkze he say " soo cool, I just wondered will you be featuring the new Wpl C74 ? Sorry if you mentioned it already , I think it looks awesome "

[@cfhcfh5916]

Has an rat rod look. Looks great!

[@bagelking6364]

Isn't that a mk 1 Toyota land cruiser?? I'd love one if those ,where do you get them from??? Nice colour aswell

[@TomleyRC]

Links in the description dude

[@wordreet]

That performs surprisingly well, apart from the steering seeming snatchy at times.

[@TomleyRC]

Yes, needs a bit of work… but very good first shake down

[@gordiefrench5342]

Thank you for giving wpl some love Truck looks fantastic on the run you made The other wpl there with you looks really good I have a c24 but steering linkage is junk and can't seem to find a fix for it Any thoughts

[@twain772]

As always I enjoyed your video. What 1.9 tires were those?

[@alanq64]

Is that a six-inch figure you have driving? Really like your camera shots.

[@semperatis]

I was sure that the green C44KM was Liam's rig Phil.

[@TomleyRC]

Yes it is 👌

[@meudrone4k369]

Chique hobby amigo 👍🏼🤩 🚙

[@finthemanbehindthescreen8520]

Tomley you may have seen me in the comments before asking the same thing which is can we have more videos and upgrades on the feiyue fy08 like body wheels/tyres and suspension

[@NoLimitRC87]

What's 1 of them?

[@finthemanbehindthescreen8520]

@@NoLimitRC87 it's a cheap rc car and it is pretty epic it has been on the channel before.

[@Doublejj55]

Go buy you own and do it yourself if you need to see it that bad

[@TomleyRC]

I’ve said I may do some… but I have lots of other stuff to do first

[@aaronscharer]

I like the song. What's the name? And thanks for your vids. I enjoy them a lot along with the Rc Retro and Kevin Talbot.

[@daig1984]

Cool micra picture

[@michaelcain2174]

Oh I’ve only got 2 hours …. Proceeds to make magic !! Now your just showing off !! And it’s so quiet 🤯

[@TomleyRC]

Haha.. yeah, the 1080 ESC with the reduction motor is super smooth!

[@michaelcain2174]

@@TomleyRC can we expect the MT08 video soon 🤞

[@plops5271]

damn that thing looked like a real rock crawler

[@ellivwiking5771]

Got a cheap mn99s, do you or anyone else know a better motor (that fits obvi) to replace the stock one with?

[@TomleyRC]

You should be able to fit the 2 speed gearbox out of the WPLs in to it

[@jonshneebley]

DUDE, YOU NEED THE INJORA DOUBLE BARREL LONG TRAVEL SHOCKS. THEY'RE CHEAP AND WORK GREAT. THEY'RE FOR THE SCX24.

[@TomleyRC]

Will check them out 👌

[@mikeontherocksuk]

Did you ever get the rear extended?

[@AngusFransham]

Love your videos also 200th comment 🎉🎉

[@ElijahBradley08]

Looks good and performs well although im not sure i like the colour

[@sebas888888]

Not wpl but I ride my scx 24 without springs and it does actually well too

[@kevingoodwin9264]

Woot! WPL!

[@jonenglish6617]

pretty cool

[@ogdizzle155]

I got a c14 I fit one of my d12 body's on it but not sure how I should go about upgrading the electronics I don't wanna spend a bunch but I also wanna have a little more control then I do now any suggestions what to use?

[@TomleyRC]

The best thing to do is ask in one of the groups on Facebook. But the WPL Res V3 is pretty good. Or the Hobbywing 1060

[@jakeclauson9863]

For my c24 I purchased uxcell m3 threaded rod and m3 metal ball links so I could make my own length 4 link so I could extend the wheelbase to what I needed. But I had drill and tap the axle brackets so I used a 2 in 1 drill & tap which was a easy as drilling a hole. But you will also need an m3 nut/bolt kit to mount them. Everything was available on Amazon prime, will share links if anyone wants. Also used shrink wrap to cover the unused threads. It works really well except the shocks I got don't pivot.. so I'm back with extended stock shocks for now. Anyone know of some quality 60mm oil shocks? With ball link mounts? Been thinking about trying the cantilever suspension setup that's on thingiverse..🤔

[@mcfrog4189]

I'd be interested in links to it all 👍

[@secretagb]

Where'd you get the crate model?

[@TomleyRC]

Thingyverse

[@secretagb]

@@TomleyRC Eww and thanks! ;)

[@davidmellish3295]

I'm probably going to be called all kinds of stupid 😆 BUT can someone please tell me what W P L stands for,( I am only just getting back into RC after 30 years and I know nothing about crawling. Any help is much appreciated, cheers 🍻

[@wheelsdownrc6348]

Great job for a last minute throw together, can’t wait to see what the hater’s have to say on this one 😂

[@TomleyRC]

Haha

[@iatomiksi2200]

Was that an mt8 I seen?

[@TomleyRC]

Yes 👌