World of Coffee 2024 - Timemore, Profitec, Olympia Express, Eureka

In this video, I show you some more new interesting products from the stands Timemore, Profitec, Olympia Express and of course Eureka! Make sure to check the chapters in the video to find the part that interests you. I included a few short clips of Copenhagen, to get a vibe of this international city, full of bikes, water, and good vibes.
Big thanks to Sam at Timemore, Sacha at Olympia Express, and Silvia at Eureka for the machine walkthroughs!
Special thanks to Barista Benji's for his excellent demo and impromptu latte art session with the Eureka Costanza R. Check him out here: barista_benji
-- Products used/recommended in this video --
(these are affiliate links that help fund videos like this, at no extra cost to you)
► My Pocket 3 Gimbal Camera: geni.us/OSMOPocket3
► Support the Channel, shop my storefront: www.amazon.com/shop/tomscoffeecorner
► Grinder Suggestions: kit.co/tomscoffeecorner/grinder-suggestions
Chapters:
0:00 Intro
0:39 Timemore
1:40 Brix Grinder
2:52 Chestnut S3
5:15 Profitec
5:22 Go PID Single Boiler
8:12 Move Dual Boiler
11:15 Olympia Express
11:25 Mina Lever Machine
14:55 Eureka
15:13 Atom Barista
18:26 Atom Touch
20:15 Atom W65 and W75
22:26 Barista Benji from England
22:36 Constanza R heat exchanger espresso machine
----------------------------
*DISCLOSURE: The above Kit.co and Amazon links lead to Amazon, and since I am an Amazon Associate, I earn from qualifying purchases, at no extra cost to you.
#TomsCoffeeCorner #Espresso #HomeBarista

[@dragonflykat]

That Profitec Move looks promising and good!!

[@Massiv16]

You can adjust the steam temperature of the Steam boiler with the PID. Max is 134 which is around 2,5 bar steam pressure 😮

[@mryoyo7741]

I hope less expensive

[@Massiv16]

@@mryoyo7741 in Germany 1960,00 Euro incl. VAT.

[@LimitedWard]

​@@mryoyo7741almost certainly going to be as expensive as the Pro 300. Likely more.

[@FatNorthernBigot]

So many gadgets and gizmos, thank you!!!

[@Marysart]

Thank you Tom, for showing us what's new. Liked the Olympia machine.I especially enjoy'd the snippets of Copenhagen you showed us.

[@JMWexperience]

Fantastic job, great coverage! Thanks ☕️

[@bogiesan]

thank you for highlighting the operation of the OE Mina.

[@cricocoo]

It was great meeting you at the venue, Tom and seeing you work. You are also covering 3 stands I did not have time to visit, so much appreciate your content!

[@TomsCoffeeCorner]

Thanks, Christoph! (I think that's your name, right?)

[@cricocoo]

@@TomsCoffeeCorner on KZbin I cannot confirm or deny that claim but there is some truth to it ;)

[@joeylauriaga2841]

Loved this!! Can't wait for all of it to hit the market

[@barylmandrillen]

Awesome Tom, nice to see you added clips from my hometown. As always, excellent video and reporting 👍👍

[@TomsCoffeeCorner]

Thanks! It was wonderful experiencing Copenhagen for the first time. Cool city with great biking!

[@scottscottsdale7868]

Hey thanks for the OE shout out.

[@joyarifianto6966]

Looking forward for the timemore manual grinder

[@jeffandersen6233]

A wonderful walk through of coffee / espresso related products that I had been interested in, snippets of Copenhagen (I'm 4th gen so maybe why I don't mind overcast skies) and your relevant questions to the reps. Milk frothing by Benji on the Costanza was incredible. With newer designs in grinders I'm waiting for something new in the espresso machine design that's not boxy and silver.

[@TomsCoffeeCorner]

Yes, Benji did an awesome job, even more so when you consider oat milk and small paper cup. Very skillful indeed. 👍🏻 He also gave me a few good pointers to try myself. I really liked Copenhagen. The people were really enjoying the water and the weather. Good vibes. My favorite was biking all over. Reffen was also very cool. 😎 Cheers!

[@jeffandersen6233]

@@TomsCoffeeCorner but a 5 second steam of milk from that Eureka was astounding

[@jeet-Seattle]

Thanks Tom

[@back_to_the_bike8820]

Thank You ! And here you are again, making a nice visit to the stands, in particular Eureka, where you're meeting up with someone you know... That said, at Eureka, the Mignon SD Pro was announced in the spring, then this summer, and now I hear that it's going to be in the autumn... I'm not sure I can wait any longer, because what is Eureka going to announce this autumn, another postponement?

[@TomsCoffeeCorner]

Sorry, I don't have the justification to this postponement! It's gonna be a sweet grinder though.

[@coffeesnob1992]

Holy crap, that milk steamed so fast on the Costanza!! Like 5 seconds?

[@TomsCoffeeCorner]

Yes, it was five seconds. But the milk was also I think near room temperature. Still, pretty nuts.

[@winexprt]

Is the Costanza R made by Vandelay Industries?

[@TomsCoffeeCorner]

Oh gosh, I don't know that one.

[@scottscottsdale7868]

@@TomsCoffeeCorner it is a Seinfeld joke.

[@jeremetriusoclaire6949]

That guy at the end is a milk steaming genuis

[@TomsCoffeeCorner]

Agreed!

[@ianshepherd6476]

Thanks for showing us the move!! Also it’s insane to me how eureka can just continue to ignore their customers. Nobody wants a hopper anymore and everyone wants zero retention and they also want a different dial bc the eureka dial is horrible. and eureka just continues to ignore that with their tiny dial, grind by weight, giant hoppers, terrible retention etc. it’s wild to me.

[@TomsCoffeeCorner]

Well, they've recently updated their dials on the new to be released Mignon line. The hoppers are huge on the Atom line, but I guess they're aimed at cafe settings. You can get a smaller one for home if you want to.

[@penguinbmx]

Barista Benji has his coffee dialed!

[@alextaylor6793]

Gosh the italian lady from eureka has a great sounding voice

[@gosman949]

that is not all she had!!

[@pabloeskibar8076]

@@gosman949 👅👅

[@trafalgarlaw7109]

I really appreciate your videos. I want to buy a coffee grinder and was wondering what grinder I should buy. I want to combine it with a cheap DeLonghi dedica. I saw your video on the DF54 and it seems that it is the best value. Unfortunately I life in Germany. So the price would be 300€. Is this still a good value or should I get another grinder instead? I would like to use the grinder for espresso. But I also want to do other things with it like mokapot, pour over, french press etc. Greetings from Hannover

[@TomsCoffeeCorner]

Hi there! I think at that price it's still a good deal. It can be adjusted for all those brew methods, and I like it's build quality and result in the cup. Your next best bet would be maybe to wait for the Mignon Zero 65, coming sometime later in the year. Cheers!

[@trafalgarlaw7109]

@@TomsCoffeeCorner thank you for the info. Maybe I will wait. Will you make a video about the mignon after it came out?

[@proudbacteria1373]

@@TomsCoffeeCornerWill Mignon Zero 65 have flat burrs ( 65 mm)? And it will cost around 300 euro? Very interesting.

[@TomsCoffeeCorner]

@@proudbacteria1373 It has 65mm all purpose flat burrs, and I think it’ll be around Specialita pricing. Cheers!

[@TripleGems.]

Is there a Gemilai product there Sire cause in asia it Rocks the whole planet these days of Espresso Power Machines let's drink to that Go,,,may you have a good force of a hand of review and a nd an experience with Gemilais coffee makers💪💪☕️☕️🙏

[@pabloeskibar8076]

eureka is nice

[@koen3170]

Thanks Tom! At the eureka stand it says Libra 65. What is that? I thought Libra had 55 grinders, new models coming?

[@TomsCoffeeCorner]

The Libra 65 All Purpose will be coming soon enough, as well as the Zero 65 All Purpose and Single Dose Pro. Just gotta be a little patient yet...

[@s96822]

re; olympia mina. after moka pots and bellman combo moka pot/steamer an olympia cremina was my first real espresso machine. paid approx 350 usd new in the day. that was a fair realistic not cheap price. today the cremina is more of a cult machine and way overpriced. mina looks to be in the 1000usd range and there are several options that do the same thing at a % of the price.

[@dearcoffee85]

Hey Tom, what was your overall impression of the Profitec Move? Any details on price? Also, how would you compare to Silvia Pro X?

[@TomsCoffeeCorner]

The Move is pretty sweet. The construction is a lot better than the Go in my opinion, and I like that you can adjust the pressure on the steam boiler. I’d say that it’s more refined than their previous offerings. The PF is a little weird with the silicon double spout. I think the price is going to be somewhere around €1800 or so. I have to be honest, I didn’t get a chance to play with the Sylvia Pro X yet.

[@dearcoffee85]

@@TomsCoffeeCorner thanks for the reply Tom. Yeah it looks pretty solid. Only thing that looks a little off is how big the metal that covers grouphead is.

[@air90air]

What ever happened to the new eureka speciality with a touch screen? I think they showcased a few new mignon line and now they disappeared.

[@TomsCoffeeCorner]

Yes, I inquired about that. They pushed off the release date on that, so they’re not showcase in that currently. Probably going to be the end of the year as I understand. But no reason to fret, they’ve got some other really awesome models to look at, including some which will be released in autumn.

[@scottscottsdale7868]

That woman’s English is just infectious.

[@air90air]

@@TomsCoffeeCorner thanks for asking them that!

[@m.brechi2861]

Have you seen the Millab grinder that fits the pineapple burrs?😂

[@TomsCoffeeCorner]

I didn't get a close look at it, no. Why?

[@m.brechi2861]

@@TomsCoffeeCorner I think they lately showcased the grinder in Boston without showing the burrs ☺️

[@Eldred32]

When will the Timemore Brix hit the markets ? i am interested in buying one

[@TomsCoffeeCorner]

I think he said sometime next year, if I am not mistaken...

[@timhanley4396]

Did you like the proftec go?

[@TomsCoffeeCorner]

I haven’t had one myself to thoroughly test, but I think the price tag 🏷️ is high for a single boiler.

[@timhanley4396]

@@TomsCoffeeCorner any single boiler machines with a metal water flow instead of plastic that are cheaper

[@TomsCoffeeCorner]

@@timhanley4396 The hot water flow will likely be through metal pipes, that’s true.

[@asmith2886]

Timemore wants to democratise espresso and yet the Millab E01, which I stupidly purchased on kickstarter, is supposed to be an espresso grinder and yet it grinds far too coarsely. Potentially excellent, but rubbish in reality.

[@m.brechi2861]

The Millab E1 works perfectly with my Cremina..

[@roveism]

Profitec is wayyy overpriced.

[@TomsCoffeeCorner]

Well, they're cheaper than ECM, but still not exactly low budget. Cheers!

[@Mastrenich]

It is really annoying to see how they keep selling the Timemore S3 as a grinder suitable for espresso, when we've tested it and even at 0 it is not able to grind fine enough for it.. Stop lying, you are destroying the prestige and credibility of the brand!

[@TomsCoffeeCorner]

I haven’t tried the S3 yet. Consider the R3 from MHW. It’s pretty awesome for espresso.

[@The_Coffee_Rabbit_Hole]

Creamina is still at the top 🤌

[@TomsCoffeeCorner]

It's a very handsome machine.

[@The_Coffee_Rabbit_Hole]

@@TomsCoffeeCorner i recently restaured an olympia cremina 1976 and i never had a machine outperforming it ... and i had quite a lot 😅