TONE's masterpiece！ RM75A 75° OFFSET RATCHET RING.WRENCH, DEEP HEAD.RM75A-0810 RM75A-1214 RM75A-1719

Рет қаралды 7,112

Күн бұрын

Something you've never seen before! Super convenient! A new addition to the starting lineup!
75 degree double head ratchet ring wrench (deep hole type)
RM75A-0810　RM75A-1214　RM75A-1719【Tool introduction】
A perfect hit!
75 degree double head ratchet ring wrench RM75A (deep hole type) 60-75 gears?
TONE's masterpiece! RM75A 75° OFFSET RATCHET RING WRENCH, DEEP HEAD
RM75A-0810　RM75A-1214　RM75A-1719
TONE's 75° offset Ratchet socket wrench
75° offset, which is something you never thought possible
When you try it out, you'll find it very convenient
It's a completely different experience
Ratchet combination wrenches have an offset or swivel of about 13°
Thinness is an advantage
but sometimes you want it to rise
It rises at 75° and is 5° overall
Rather than a ratchet socket wrench
it feels like using a socket wrench
It has just the right height and is tapered
This taper does a great job
75° + taper height
Overall, it has a very wide range of coverage
It's a ratchet socket wrench
As a gear wrench, it's a bit It is set to be long.
The same length as a box wrench.
A little longer than a combination wrench.
I'm a little worried about its strength, but it's very easy to apply force.
The sound is that of a regular gear wrench.
I think it uses a solid gear.
The forward and reverse rotation is switched with a ring.
It can be locked, which is rare for a ratchet wrench.
It's a common feature for ratchet drivers, but I think a ratchet wrench that can be locked is quite rare.
When you want to adjust the tightness, you can do the work that you used to do with a box wrench without having to switch hands.
It's very convenient.
Why doesn't it use this elsewhere?
Is it structurally complicated?
A strength issue?
Why are there so few ratchet wrenches that can be locked?
Please let me know your opinions in the comments section.
The forward and reverse rotation is very smooth.
...For some reason, only 19 mm gets stuck.
Is the ball movement bad?
It's only 19 mm, but it gets stuck.
I use a little sewing machine oil on the ball part before using it.
(Be careful not to get oil into the gear part)
I think it's just individual differences, but
I wonder if there are hits and misses? I think so.
It's a little long and easy to apply force.
It's longer than a gear wrench.
I'm concerned about its strength.
I asked TONE about its strength, but they replied, "We don't have any data on its strength." (lol)
Since almost the same product is sold by other brands, it is probably an OEM made in Taiwan.
I think it has the same strength as other products such as ratchet combination wrenches.
(Same strength = standard tightening torque of the corresponding bolt and nut)
It's a tool that you can manage without, but it's a tool that makes work fun.
It has a wider range of uses than I expected.
There are many things that can be managed with just this.
Since I got it, it has become my "standard tool to carry around."
A great hit from TONE! They do a great job
Amazon's website
RM75A-0810 Width 8 x 10 mm
amazon.co.jp/d...
RM75A-1214 Width 12 x 14 mm
amazon.co.jp/d...
RM75A-1719 Width 17 x 19 mm
amazon.co.jp/d...
TONE's website
RM75A-0810 Width 8 x 10 mm
www.tonetool.c...
RM75A-1214 Width 12 x 14 mm www.tonetool.c... RM75A-1719 Width across flats 17×19mm www.tonetool.c...