Cheap Vs Expensive Ratchets

[@tshadow6]

Amen on the less expensive tools. Some guys (especially the non professional) love to talk about how great Snap On is, but they don’t own any. I grew up on Craftsman, now I’m a Kobalt fan. My tool box holds Craftsman, Husky, Kobalt and Duralast tools. They all keep my cars and motorcycle running.

[@swanaldmcdnld]

I completely agree, I have brands from snap-on(blue point and Williams) as well as harbor freight(pitsburg, Quinn, and icon) as well as Walmart(hyper tough, and Hart) and craftsman lol, other than the snap on hard handle, most of the mechanisms function about the same

[@jessenewsom]

I run a heavy truck shop and have a mix of everything including harbor freight stuff. But for wrenches the only ones i like are mac and proto

[@prairiefarmer5994]

Tekton is the new craftsman if you ask me. I had bought a decent amount of Kobalt in years past because I liked the tools, and had a Lowe’s right by me. Now that Lowe’s is slowly phasing out Kobalt hand tools, I’ve been moving into Tekton. Plus their warranty is something you can’t beat now that I’ve moved to a rural area.

[@andybub45]

The Kobalt ratchets are total junk right now. Most of their tools are now made in China instead of Taiwan, super sad.

[@TonyTheTechnician]

Agree. It's hard to beat that tekton warranty!! 👍

[@randybrown9815]

I been a auto tech for over 30 I have a shop in southern Missouri and I have a good amount of tools but never bought top line tools but the cheaper tools work good and if one brakes I buy another one and don't brake many and I do a lot of work

[@ED-es2qv]

As I’ve gotten older, I enjoy the feel of high end tools more than I used to. I used tools more when I was younger, and I only cared about toughness and fit. In some cases, the Tekton feels better to me than the snap on, and I would prefer it. I mostly only have used snap on tools, because I never shop anywhere that would have new. If I’m going to buy a tool without feeling it first, it better be a reasonable price, so that leaves me ordering tekton.

[@gtcam723]

I boxed up and stored all my Craftsman stuff simply because if I do break it, they’ll replace it with some imported piece. Now I have a lot of Tekton and Gearwrench

[@timothylockhart2009]

Very thorough comparison, I'm a fan of the bang for the buck mindset when it comes to tools. Especially since almost every hand tool has lifetime warranty through the big box stores.

[@TonyTheTechnician]

Thank you. 👍

[@acidforblood]

Just picked up 2x 243 piece Gearwrench sets 1x in 6 pt. and the other in 12 pt. These are my first starter mechanic sets for DIY. I'm not a mechanic by trade. I probably could've gone for something else like Tekton or Sunex but I had my heart set on Gearwrench. Seeing as I'm not going to be using them consistently like a mechanic would with proper care and using my brain (not to be too rough with them if I can avoid it, and pick a beater tool if I need to) I think they should last a few decades till I'm dead. I realize some professional mechanics out there will think I'm stupid for buying them seeing as its lost on DIY or the flipside being the claim for downward quality control and warranty issues but meh. I need to start somewhere. I respect peoples choices and their budgets. To all the mechanics out there busting their asses off to make a living to me you are heroes that need to be recognized. It makes me angry when I hear how cut throat it is in many trades out there. A lot of men like myself like working with our hands. We need job security and to be treated fairly.

[@rogerfluhr5652]

Try one of the Koken Zeal series ratchets and you will be blown away.. And you can find really good prices on their stuff if you do the right searches. Worth it.

[@desertratedc9596]

Tekton 90t ratchets are holding fine for me as a Chevrolet mechanic. The current ratchets I am putting to the test is some olsa roto head ratchets that I got sent by accident instead of the wobble extensions. They seem allright so far. Better then the icon and pittsburg roto.

[@TonyTheTechnician]

Very nice. Glad to hear it. Thank you for sharing your experience

[@jrpowers667]

I've been looking at Olsa for a while and finally getting a set of 3.

[@michealrobinson]

I too love my Snap-On but I just picked up a Pittsburgh Pro 72 tooth 3/8" comfort grip, and it's a nice ratchet. Can't wait to put it to the test. Also got a husky 1/4" that works like a dream, and actually prefer it over my Snap-On simply because it's smoother with less back drag

[@cyoungso]

Yep, very smooth. Head is also very thin. Only downside for me is the switch is backwards

[@michealrobinson]

@@cyoungso yeah, some like to call that a**backwards lol I'm sure it will annoy me as well but I bought the Pittsburgh to try out and mainly for a back up

[@rodrigodelallata7140]

got the Tekton 1/4 ,3/8 and 1/2 in. socket sets, they are very nice. ordered two sets of ratchets 1/2 in drive three of them, 3/8 drive four of them. Its been 10 days and have not arrived yet wish I had them since they have already been paid for.

[@TonyTheTechnician]

Very nice that's awesome. Dang that's crazy about the ratchets they usually get the stuff shipped and arrived in like 2 days. The only reason I can think of is that you ordered a ratchet that ran out of stock and they are waiting for more before shipping. If that's not the case I would contact them. They are usually very good at shipments

[@rodrigodelallata7140]

@@TonyTheTechnician I will tomorrow on Monday. contacted them yesterday via email they did respond quickly, said to give Fed ex till this coming week.

[@mandapalque]

Tony: On the 1/4" ratchet, Chros from Client Graphics testes a good amoutn of 1/4" ratcheta and the: TEKTON, CAPRI. ICON ratchets broke at higher torque pounds than the SNAP-ON. Also, i use the PITTSBURGH PRO flex head 1/4" and is is so smooth that it is my go to ratchet, fornthe past 5 years. I work on scooters and motorcycles, once a bolt is tight enough, that i would need to do a lot of pressure, I grab my 3/8" ratchet. I have NEVER broke any ratchets cz i NEVER buse them. Also, back drag is important for auto mechanics, the Pittsburgh PRO are the best, according to another video from Chris. So. Thanks for this video. I wanted to add the advantages of the PITTSBURG PRO ratchets.

[@TonyTheTechnician]

That's great to hear and glad you found a ratchet you really enjoy and I'm the same. If I get something tight with my ratchet and it still needs more it's as simple as stepping up to the next bigger ratchet. Thanks for sharing your thoughts. I appreciate it 👍

[@ED-es2qv]

Keep in mind that’s a pointless test, so you might as well compare them on how long it takes to grind through them. The torque those things failed at is so far above anything you should or would pull on your prized socket driver. I have a 3/4 breaker bar for those torques, if the impact gun didn’t do it. I think the back drag, slop, whatever else is way more important than seeing if my 3/8” ratchet can break lugs off a semi.

[@andybub45]

I love my Tekton 90 tooth ratchets. The Snap Ons are great, but I do not like the thick head design. I like the very slim design of the Tekton. If Tekton would start making these in the USA, I would be even more impressed. I also have a Pittsburgh swivel head 1/4 inch ratchet. For the price, it is pretty high quality. Only complaint I have about it is it is quick release and there is a lot of tooth drag. But it is great for under dash work.

[@TonyTheTechnician]

Very nice that's awesome to hear and ya I like the slim design as well!! 👍

[@ryankosik18]

Snap on, gearwrench and tekton are all I buy now

[@TonyTheTechnician]

Very nice!!!

[@countryonemobile4420]

Agree. Im with you. Gw and Tekton new. Snap on used when i do have to buy.

[@colemanbonner]

I got bit by the bug, I’ve got a collection of snap-on comfort-grip ratchets. I’m at 25 so far, with 4 breaker bars. Help me. I can’t stop.

[@jamesstephenson2346]

Snap on and tekton are great. Gearwrench.. not so much

[@ryankosik18]

@@colemanbonner I'm 25 as well and have like 20 snap on, mac, sk, etc. ratchets.

[@guyconnell2250]

$70 for a new Craftsman ratchet. I had no idea. LOL. I recently jumped on the new GW reduced profile 3/8" ratchets. A stubby and a regular length. Phenomenal.

[@TonyTheTechnician]

Very nice ya that is a great set I love those ratchets.

[@raulcamcho7046]

And sometimes the heads make a little difference when you’re working in tight areas for how thick the head is of the ratchet

[@james88477]

Snap on 1/4 flex head body with classic hard handle and 3/8 drive in place of the 1/4. 10 years working at international dealer and fire dept shop and it’s my go to never an issue...great investment

[@TonyTheTechnician]

Very nice. Ya I know another of people that love that 👍

[@jeffhooper3447]

FCF72 I just picked one up last week. Awesome little thing!

[@altonbarbee8864]

Matco silver eagle ratchets are my every day go to. They are inexpensive and lifetime warranty. I only wish they had the flex head versions.

[@haig6877]

I just bought the 101 peice silver eagle 1/4 and 3/8 set from silver eagle I was wondering how long do they last with every day use

[@altonbarbee8864]

@@haig6877 i been using mine daily for over a year now. No issues at all. Definately an upgrade from my craftsman ratchets.

[@mamakd32]

I love my GW ratchets. I just bought a 90T 1/2 drive flex head for $44. The 120xp is even cheaper at $38 right now, but I wanted to try out the new 90T. Good deal 👍

[@TonyTheTechnician]

Very nice!!! Hope you enjoy

[@greghandy4746]

I think a big issue is the quality of the actual sockets, which is not discussed. A cheap socket can round out a bolt causing misery. As I have become older, I don't have time to mess around and lack patience. If I have to pay more to avoid the frustration I will spend it. The ratchet wrench is also important - like it was mentioned fine tooth is the way to go, and a clean direction switch feel. You know when you are using a cheap tool. Sometimes it is better to spend more than you had planned than less than you should - life is too short for cheap tools.

[@TheDSMIVTR]

I find it interesting that inexpensive tools are always placed alongside Snap-on. I think it would be interesting to see a shootout between high-end ratchets like Snap-On, Proto and Wright. Granted, Proto and Wright are more for industrial use (and few know that Proto, let alone Wright, exist!), but a torture test between the three would be a fun watch. I know. No need to dump hundreds of dollars into three ratchets. But I'd still like to know who the real king of the hill is.

[@Grodd70]

I have to agree with this posting. I have a mixed tool box of ratchets ranging from Kobalt, Craftsman , Huskey, to Armstrong , BluePoint, Mac, Cornwell...and one Snap on. They all work fine. Back in the day the truck brands really put emphasis on comfort. Yes, there was quality but Craftsman back in the day got the home mechanic through just as Armstrong, Proto some of the others. But the grips were not as nice so back then I could see it especially if your using tools day in day out as a trade. Now everyone has copied the high end truck brands. My Kobalt and Blue point are just as comfortable as an older Mac. I have Mac screw drivers that are super comfortable, especially compared to the old hard plastic Craftsmans. I went to Home Depot picked up a set of Milwaukee and they have just as nice a grip and the whole set cost less than one Mac.

[@jrbpit1]

I got a SK 90 tooth 1/2 drive flex head ratchet from SK for 65.99. It was on special a few months ago. Right now they have a similar deal on the 3/8. If you can afford it, buy the US made stuff, support your hard working fellow citizens!

[@TonyTheTechnician]

Absolutely👍 great buy. Thanks for sharing

[@bobbygarrett9588]

You know me Tony, every ratchet I currently use is Carlyle. Catch em on sale, can’t beat them with a stick!Thanks again, Brother.

[@TonyTheTechnician]

Agreed. Great ratchets especially when on sale. Thank you

[@jamesstephenson2346]

Love em for the price

[@dukefanshawe6815]

I have husky and Icon tools. I just bought two SK USA round head ratchets. I can't wait to try them out

[@jaydee2620]

If ur doing heavy diesel tekton 1/2 inch ratchets and sockets won’t due. Well not on large bolts that need excessive torque. 1/4 and 3/8 are good to go for appropriate use. Btw I love tekton tools and value

[@TonyTheTechnician]

Ya for heavy diesel I might step up to the 3/4

[@rodneywager2142]

Tony I have a tekton 3/4 impact socket set ,ratchet and xtra long 3/4 breaker bar for working on agriculture tractors and for the price and abuse they take I'd definitely buy again. Great tools great price great warranty.

[@TonyTheTechnician]

@@rodneywager2142 very nice that's great to hear thanks for sharing your experience with them 👍

[@alvarobedoyafranco2228]

saludos, gracias por regalarnos tus opiniones a los amantes de las herramientas

[@williamdon3442]

Shaun of the dead. Wasn’t the only one thinking it

[@TonyTheTechnician]

Lol Simon Pegg. I'm sure I've gotten that comment 1000x over the last few years 🤣👍

[@MrSpartanicus]

As far as ratchets, I have a set us craftsman and I bought a set of newer craftsman after they first appeared in Lowe’s. For my birthday though, I’ll be investing in Matco locking flex ratchets.

[@TonyTheTechnician]

Thanks for sharing 👍

[@kevinragsdale6256]

Matco is just rebranded Taiwanese tools at snap on usa made prices. Just buy gearwrench, its the same thing

[@MrSpartanicus]

@@kevinragsdale6256 Except Matco ratchets are made in the USA.

[@jaymechanic1228]

I really like my mac axis ratchetts...but nothing fits my hand and performs like a snap on comfort grip ratchet... im a sucker for the extreme green and pearl blue

[@TonyTheTechnician]

Haha nothing wrong with that! 👍

[@Toolaholic7]

If you want to see real expensive check out these Japanese tool brands, Koken,Nepros and Tone.Koken has one 3/8 ratchet that is over a grand.With Gearwrench,proof of purchase is needed with their warranty.Been through this lately,Auto Parts store we bought the set from told us proof of purchase is needed.It was with a broken 8mm deepwell socket in 1/4 drive

[@TonyTheTechnician]

I hate that tool companies expect you to have a proof of purchase. That's ridiculous. And ya I was looking into nepros awhile back. Amazing ratchets but definitely spendy

[@carterthiessen2664]

I have 2 1/4 inch, 4 3/8 and 2 half inch ratchets and they're all Dual 80s. Can't go back to using anything else. I do this 9 or 10 hours a day 5 days a week, I will not mess around with cheap tools.

[@cyberneticghost47]

I have the comfort grip icon ratchets .I would like to get some of the tekton.

[@raulcamcho7046]

I love my Pittsburgh pro flex it ratchet I just wish they will make the long version of it with the flex it instead of buying the snap on one I know there are other brands of it almost like it I’m just skeptical about breaking it and not being able to warrantee it

[@tonytooltime5373]

Hey T3, 3T Here, great vid!👍 I work with my Ratchets daily, (Duralast/Pittsburgh/Armstrong/Titan/etc.) inexpensive Ratchets. They all still Work & Look like New. As long as you Treat them like a Baby and not Abuse them, they will Last Forever! But I just got to a Point in my Life where I just want the Best of Everything! So I just got my 1st Snap-On Ratchet, I love it. Alright TTT, just wanted to put that out there.👍😁👍 TTT, Out!✌

[@TonyTheTechnician]

Hahaha what's up TTT absolutely agree with you on that. And that's awesome I'm glad your enjoying your new snap on!!!

[@tomwinslow5086]

Check out the Milwaukee flex head ratchets. I like them a lot. I own snap on , gear wrench , Icon , American Craftsman , and more. I reach for the Milwaukee more than I thought I would.

[@TonyTheTechnician]

I picked up a 1/4 locking flex head Milwaukee ratchet and I love that thing.

[@jaydee2620]

I own the 24 inch tekton 90 tooth half inch ratchet. Non-flex and no quick release. The handles is noticeably thinner than my Snap-On or Gearwrench. Not sure why they did that other than cost. A 24 inch ratchet needs to b stout. Just curious is your tekton half inch in the video thinner than the snap on you have next to it ??

[@TonyTheTechnician]

Mine is the 18 inch 3/8. I think the reason the handle may be thinner is due to the head of the ratchet being so much thinner and the head would become the weak part if handle was thicker. I hope that makes sense 👍

[@larryborkstrom3580]

Mine are not most expensive but there up there I prefer a snap on ratchets I've tried the more expensive Matco it's nice but the so is a little better speaking for only myself

[@jamesstephenson2346]

Have to agree. I have a few matco and mac ratchets. Both are nice. Snap on is better. When it comes to ratchets. Just one mans opinion, and all 3 are great

[@jordanrussell345]

Great review. Can you tell me the model/make of the black tool cabinet behind you?

[@codysallander581]

My most used ratchet is my matco locking flex head long handle

[@TonyTheTechnician]

Very good Ratchets 👍

[@Pauleh123]

With main line stuff, you do get what you pay for. My 3/8 12" locking flex matco 88 was worth every penny. When your a professional, that last 5% of quality is worth double the price, and the service from the truck is very important. My 40 year old 1/2 matco round flex head got floppy and my matco dealer exchanged it no questions asked with a brand new locking flex the same day. And the mechanism was still great after being bounced on by 2 techs countless times. That being said, these mid tier ratchets are really starting to get good. I like the tektons the best, the head size and feel is a lot closer to the pro brands. The pittsburgh's are hit and miss, but they are nice to have around when you need to beat on it with a hammer or bend to make a special tool. Haven't had the best luck with the gearwrenches, though I haven't tried the new 120XP. Their kits have a lot of gimmicky stuff (like why in the world would I want 6 point wrenches and 12 point sockets?). All their flex ratchets are junk, and the mechanism is kinda sloppy. Anything lower tooth then the 84 is JUNK. Their ratcheting wrenches will get you out of a bind or for speeding out hard to reach bolts, but not much else. Easy to break, and the mechanisms are sloppy and gritty. For ratcheting wrenches, there really is no comparison to snap on or matco, though I want to try the new SK x frame wrenches. Avoid carlyle and craftsman, junk with impossible warranties. Especially now that Sears is gone. Lowes always gives you the runaround. For those watching the videos showing how the off brands beat snap on in strength tests and hate on them, it's not all about the strength test, once you pick up a pro brand ratchet and use it, you'll understand.

[@Pauleh123]

ONE VERY IMPORTANT NOTE. The ball detent flex head ratchets WILL GO BAD. The little ball or the spring will get worn out, or more commonly for me is the teeth on the ratchet head wear out. They strip out and then no longer hold the position. I really like how the Tekton has the bar that goes across.

[@pdaddy879]

You really need to try that 120xp I believe it will change your mind about gearwrench

[@Pauleh123]

@@pdaddy879 I might, it's cheap enough and I hear good things. And I have a soft spot for interesting ratchets.

[@thomasenglish1173]

Picked up a Snap-on f80 the other day for $60, but definitely want to get the tekton flex head ratchets

[@TonyTheTechnician]

Very nice!! 👍

[@jamesstephenson2346]

@@Crustychevrolet thats not something to brag about. Sorry you were never used how to properly use your tools

[@georgeferlazzo7936]

Hello again Tony Thank you for the Great Video. All of your ratchets are good choices. I have never owned a non-quick release ratchet. How does that change the way, the ratchet works? Does it change the way the ratchet feels? Like I mentioned earlier, I have never owned a non-quick release ratchet. Otherwise, another Great Video, Thank you

[@TonyTheTechnician]

Not much of a change in feel or operation. Just a preference really. They say they are a little stronger since the anvil isn't hollowed out like a quick release but I don't break anvils lol if something is to tight I just grab a bigger ratchet

[@Pauleh123]

As a professional, I much prefer having non-quick release ratchets. When you're constantly changing what socket or extension setup is on there, it's much quicker to change it out. Much more fluid motion. I wouldn't mind quick releases if you didn't have to press the button to get the socket on there. I've also never had a problem with sockets coming off. That being said, I do like having a few quick releases in my box just in case.

[@georgeferlazzo7936]

@@Pauleh123 Hello Pauleh Thank you for replying to me. I too am a professional, as a Aircraft Mechanic. Most of my tools are Old School Craftsman. In the twenty something year old to when Sears closed their doors. So I am looking and researching for my upgrade my tools before the oops it's broke, now what stage. I wish my Father were still alive, He would love it with all the new Tool brands. Thank you again.

[@TonyTheTechnician]

Thank you and sorry your father is no longer with us. It is amazing how many tool brands are available now compared to 10+ years ago.

[@Pauleh123]

@@georgeferlazzo7936 if your looking for a main line set, get the Tekton 1/4, 3/8 and 1/2 set. Gives you pretty much all the socketry items you need at a really great price. They offer that kit in 12 point as well. $375 US. It's no snap on, but it sure beats all the home store brands and it has everything. Sorry your father is no longer with us, dad's truly are the greatest.

[@countryonemobile4420]

Nice video. The new Gearwrench 90t ratchets are great. Have about half of the entire line. Will have all of it soon.

[@TonyTheTechnician]

Very nice. Glad to hear your enjoying them as well

[@ronanderson1816]

What do you think of Sonic Tools ???

[@TonyTheTechnician]

Some of those tools are very generic. Some are very nice. But I haven't personally used them so I can't say much. As far as I can tell another of it seems over priced. But you also get some nice organization with them 👍

[@scottreiber8555]

Matco Ratchets are made in the USA. I bought a 3/8 in black chrome and a 1/4 inch in chrome and there is an American flag above the handle on both. They are very expensive but very very nice. N jbl

[@ThriftyGarage]

Thanks for this tool review!

[@TonyTheTechnician]

Thanks for watching 👍

[@craigchiddo2794]

What is the pn on the silver eagle ratchet

[@mattfinleylive]

That craftsman is now .... EIGHTY DOLLARS!!!

[@johnrobertson1531]

Craftsman was bought by Stanley & that's why they are now made elsewhere instead of in the us.

[@towboatjeff]

Craftsman left the U.S. long before SBD bought them. Now that SBD bought them they are building a new plant in Texas to start bringing manufacturing back to the U.S.

[@MrSilvervw]

Fantastic content 👌 👏 👍

[@TonyTheTechnician]

Thank you

[@nickbrown8553]

Matco ratchets are made in the USA btw

[@johnnyramirez9082]

Matco ratchets are the best in my opinion

[@TonyTheTechnician]

Glad you enjoy the matco ratchets. Thanks for sharing your thoughts

[@haroldkleever8213]

Look like there handles are going to the older ones I have a craftman from 1989 still doesnt skip a beat with that same handle but my new craftman suck I dont like them I going to try tekton tools now

[@TonyTheTechnician]

Heck ya the old craftsman were bullet proof.

[@branned]

Excellent review. 👍👍

[@TonyTheTechnician]

Thank you

[@trentroberdeau6399]

The craftsman gun metal chrome sets are a great value, an a very good quality.I would never buy tool truck brands...

[@TonyTheTechnician]

Absolutely I saw that set during the holidays. That's a great deal! When you see craftsman sets on sale or at a great price then definitely look into them. Unfortunately alot of the other stuff is a little high. But very good point 👍

[@eggs712]

The worst ratchet ever, IMO, is the 45 tooth craftsman. The back-drag is terrible, and they often reverse themselves under high torque. It's crazy that the new Craftsman didn't let that design finally die

[@towboatjeff]

I couldn't believe the prices craftsman was wanting for their ratchets at lowes when I looked at them.

[@TonyTheTechnician]

Ya I know. It's cheaper to buy a craftsman socket set then it is to buy a couple of individual ratchets

[@kevinragsdale6256]

Craftsman is shit now

[@asm42]

@@kevinragsdale6256 they're trading on a name, it's all Stanley. not even old craftsman was anything special. they used multiple suppliers.

[@zeth8300]

I agree with you

[@tomycodd]

SK makes good ratchets you can catch a good deal on Amazon.

[@SnD340]

You referring to their round head style or their new lp90 pear head

[@tomycodd]

Both styles

[@andybub45]

They are starting to get expensive

[@BradsWorkbench]

Nice one ton ton tony ton

[@TonyTheTechnician]

Lol thanks

[@HawtSawz86]

Looking through the comments, I’m going to be unpopular with my perspective here. I have Snap On, Mac, Matco, Williams, old Craftsman, and some German stuff. I’ve used co-workers GW and Tekton. I am a very patriotic person and fear what happens when more Mfg ends in the US. I even look for USA made clothes on eBay. I’m not perfect, but I’m trying to do what I can within reason. I have greater pride knowing the tool I’m using was made in the USA. I spent 7 years using my tools professionally and not a single failure except a locking button or an impact swivel, and I was pushing the tools, flat rate. Everyone has different priorities. Someday when my kids get my tools I’ll be proud knowing it’s not from China or Taiwan and still working great. No I’m not a dinosaur, I’m in my 30’s.

[@hlpang1075]

No quick release button, no buy

[@neighborhood_k]

Koken and nepros ratchets for me

[@randellgribben9772]

i just watch a video on how much ft/lbs to break these wrenches all of the failed above 250 ft/ls... tectron and snap on failed at 292 ft/lbs..if you are putting 250 ft/lbs on a 3/8 drive wrench, you are a fool

[@TonyTheTechnician]

That is very true!!! Completely agreed. If you are putting that much force onto it, it's probably best to step up to the next drive size or to a breaker bar. No sense in destroying a perfectly good ratchet.

[@davidwalle5025]

Texton, gearwrench and Kobalt. Have some older craftsman professional made in us they look like mac very good, now craftsman is crapsman.

[@TonyTheTechnician]

Agree with you once again lol 👍👍👍

[@MarzNet256]

The craftsman tools at lowes are ridiculously pricey, and and the design is lame. However, the new sockets and ratchets seem fairly solid.

[@TonyTheTechnician]

I feel the same way for a majority of it.

[@theNillaLenape]

I prefer the fr80 over over the F80s.

[@aldonco]

All done with craftsman tools. You might as well buy Harbour fright.

[@bryansmith5980]

I was a lifelong Craftsman tool user. Even though over the past 30 years I have bought big dollar truck tools. And cheapo dollar store junk. I have found that over the years Most of the big dollar truck tools have gone the way of the midrange tool. The Stanley Tool company has destroyed for the most part of the once great tool's out there. With there purchase of the big tool companies? Mac, Snap On, Proto, Craftsman, Etc. The one time trust and quality is for the most part slid into the trash pile of Corperate greed and profits. I know due to a ton of pressure from us the peanut qallery they are attempting to build a new US based plant in Texas to bring back some of the production of Craftsman again? I know that someone will gripe about this post. But we as a collective should put on and keep the pressure on the tool companies to bring back Quality, And yes we may have to pay more in the end. I am willing to?

[@raulcamcho7046]

Honestly with a new craftsman ratchet the handles are too weird for me

[@TonyTheTechnician]

Agreed 👍

[@TheSprinterVan]

Great advice to find a good ratchet but shop around for the best price also! My favorite place to find tools is garage sales and flea markets I love picking up a $30 ratchet for $3😳😁

[@jeffalan6339]

Tired of take my car in for repairs, pay a lot to be fixed. Not always, went to college for auto tech. Bought master mechanic had customer satisfaction guarantee. All theses later still using them while my craftsman couple have been warranty out, one several times. I worked in a dealership bought some snap on and some matco, Mac a couple of tools, sk gave me couple of tools to win me over never sas him again. At times you get what you pay for like audio or optics.

[@michaelkolbe5963]

Breaker bar and ratchets will last forever even the cheapest of them

[@TonyTheTechnician]

Breaker bars possibly but cheap ratchets no, maybe if you just change oil 4 times a year

[@matthewkobielus2656]

Aircraft mechanic here and we have snap on boxes provided at work and after seeing the pure abuse the snap on tools can take I don’t think any other brand could hold up especially not your inexpensive tools. Plus you can’t beat the feel of a snap on tool so low profile and comfortable to use.

[@pdaddy879]

You havent used the 120xp yet then...try it

[@matthewkobielus2656]

@@pdaddy879 haven’t yet and not saying it’s bad but I bet it wouldn’t last

[@TonyTheTechnician]

The 120xp has held up just fine

[@thinshadow551]

Unless you have experience with both, you can't really compare them just because it's new to you.

[@HawtSawz86]

Amen brother

[@NB22222]

Idk if anyone has said but you have rapairs instead of repairs on your intro

[@TonyTheTechnician]

Ya lol I noticed awhile back I stopped using this intro I just recorded this video awhile ago

[@TheMetaldudeX]

Prices have change so much..

[@TonyTheTechnician]

Right! It's crazy how much had changed in such a short time

[@CollideFan1]

Tool truck brands are overpriced and overrated. Plenty of American brands like Williams and Wright which are cheaper and better than the tool trucks. Plenty of people have tested various brands and have proven that, like Project Farm. I don't buy china garbage hand tools. Some Taiwan is good, I'll give credit where credit is due like Tekton. They have good tools and they're slowly moving some manufacturing back to the States where it belongs.

[@ivanushka1646]

First again!!!

[@TonyTheTechnician]

Haha 😂👍

[@1Barsamian]

Yawn

[@TonyTheTechnician]

Go take your short attention span to TikTok 🤣👋

[@trentroberdeau6399]

Nothing quality about snapon

[@lukesalazar9260]

My snap on tools are quality