Tool Review --The Klutch Mobile Welding Station from Northern Tool -- A Setup Table at a good price!

[@shawncoffin1153]

Great video, thank you!

[@ludercoarms]

Thanks for watching!!

[@austinturney9528]

Thanks for the clear and practical review.

[@ludercoarms]

Thank You!!

[@barrybrum]

I agree with the need for wheel locks versus levelers if I had to choose between the two options. Could be the designers of these rigs have never personally used any type of work table with casters that don't lock down. I prefer casters on my welding table so I can roll it outside the shop on nice days. But I also don't want to chase down a table every time I bump or lean against it, and that will happen without lock-down brakes on the casters. Thanks for creating and posting the video, I've been considering buying this table.

[@ludercoarms]

Glad it helped you out, thanks for watching!!

[@dmc2087]

I have a very similar table not a cart , bought a princess auto in Canada , its ok but not great , I threw the legs away cheap flimsy steel ,made my own corner levelling adjusters , works ok for what I do , I you buy some cheap f clamps cut them down and weld on 5/8 short bolts you get better clamping options .

[@ludercoarms]

Thanks, great idea!!

[@greezyzgurage]

Great video and helped a ton!

[@ludercoarms]

Thanks, glad it was helpful!!

[@nickcourtright86]

Nice review. Also nice tips with the setup tools and homemade version with a 5/8 bolt. How sturdy is the bottom shelf? I would like to set a 60 lb welder and a water cooler on it if it would hold up

[@ludercoarms]

Thank you! The bottom shelf is pretty sturdy, and would have no problem with a 60lb welder and water cooler. I use mine to store a large assortment of clamps and jigs, and coffee cans full of pre-cut gussets. Not sure that putting your welder there would be a good idea though, as it is going to get covered in slag, spatter, grinding dust, ect. I guess it would depend on what kind of work you do on the table.

[@richardschaffling9882]

Thanks but I don’t know where you live but harbor freight is $169 for that

[@ludercoarms]

Then you should definitely get it there if you want one -- Northern tool is not a sponsor, neither is Harbor Freight or anybody else for that matter. I bought it cause I needed it for a project and at the time Northern Tool had it. Trust if my local Harbor Freight had one in stock for less when I needed it, that's where it would have come from.

[@zoltannagy1813]

I'm curious to know how flat the top is.

[@ludercoarms]

According to my strait edge, very flat. it has reinforcements welded to the underside to keep it stiff.

[@dalek.6171]

I just bought a cheaper version of that Table with the same exact 4mm top. It is perfectly flat the short 24 inch all the way across , but has a very slight bow the long way.

[@Toekneepowers]

All I can think about is wielding each piece in place and removing the nuts and bolts. That’s just me though, I got problems.

[@ludercoarms]

I will probably do it if the bolts start working loose

[@tristan9920]

😴 Promo_SM

[@ludercoarms]

Thanks for watching!