Tool Show is live at Milwaukee PIPELINE!

[@matthewhoffman9242]

Next step is a cap nailer/stapler for house wrap and roofing felt. Wouldnt think it would take too much to adapt a nailer/stapler but trying to feed the caps is probably the issue.

[@simonjones2234]

Buddy 😂 that skill saw rep is freakin’ tweekin’ lol

[@zacharyrhall55]

YOOOOOO that is straight facts. The way he was moving then you got to see those pupils.

[@ariguerrero8762]

Damn,i never understood why people get so hyped over tool companies and Rock their brands like their favorite sports team. never had this problem before.....and then I bought the fuel m12 impact and drill during home depots sales...and then a few days later i was like, "i guees i need a fuel rachet too.. and a few high output batteries and a 120 bit set while im at it..." Then i found myself looking through more of the Milwaukee deals and now im watching this...i feel like theres a serious problem that im starting to develop here 😂😂😂

[@keeganmartin3187]

You caught the bug lol and eventually you will be trying to dig up dirt on the other brands like DeWalt being owned by Black and Decker😂😂

[@jeffreystrader3191]

Yeah this guy leading the reviews was no doubt a car salesman for a few years…. HA Ha

[@JettaGetUpandGo]

Joined the stream a little late, but was able to start at the beginning and watch it all over the course of the workday. Thank you for the effort!

[@IppiopaidFEEDBACK]

19:29 i’m getting that roofing nailer and I don’t even need it. I have the 21° and 30° framing nailer from Milwaukee for about two years and I haven’t even use them yet.

[@Nicky14P]

So pumped for the new m12 stubby!!! Been a long time coming.

[@Kasperdsmk]

i need it now

[@existential_]

single drawer packout, single drawer packout, single drawer packout 🤞🤞🤞

[@Jayknowstools]

It’s the rolling drawer packout, or the cabinet packout

[@inlinesix1187]

Man you asked all the important questions with the forge batteries!👍 answered all my questions.

[@ElectroAtletico]

The rolling front door packout = winner

[@JamesCusano]

FINALLY A ROOFING NAILER! And it comes with a siding adapter! And daaaaamn, look at those new 20" chainsaw DOGS. Rob, your ability to marathon livestream these events: BRAVO, sir. 👏

[@gregorsamsa1364]

Only vinyl siding

[@92ireland92]

I think the circ saw dude is tweakin lol

[@gregorsamsa1364]

For real

[@jonathanrose456]

You could set the mics to left & right & broadcast in mono to kill clipping

[@andyprice4696]

Ok now….. I remember the same dude when the new 6.5” saw was announced a year ago being a little hyped up tooo much. Now he’s doing the new saws here and he may be tweekin. Been around construction sites enough to know one when I see one. Either that or he’s just hyper and very enthusiastic about circ saws!

[@phillipmoody710]

2:13:18 Sarah you take very good care of Rob. Last year he almost dropped from exhaustion if I remember correctly.

[@jamison74]

Milwaukee is KILIING IT! That 550 ft pounds of torque at 12 volts compact will get a lot of people in the know to switch to team red.

[@donnie017]

I’d like to see the actual 550 first.

[@jwanilpatel3223]

​@@donnie017 Milwaukee is like bmw they underplay the power ..... I can assure u its gonna be 550 or more

[@InChristAloneForever]

Well they are now playing catch-up with DeWalt… so it’s good to see an impact ahead of yellow again.. it’s been a while.

[@raulfonseca2303]

When will the new Forge 8.0 and 12.0 batteries be available?

[@jaemarple608]

When will the tool be release?

[@LastUserStanding]

Hope we finally get some info on the Snowblower they teased at the end of Pipeline 2022. They said it was supposed to release in 2023

[@JeremyJohnson79]

Awesome job you two!

[@906Roofer]

I've been asking about a coil nailer for years I even talked to some of the reps a couple years ago and said they were in the works..... It's pretty much the only DeWalt tool that I have is the coil nailer but that thing looks even better. I'm a commercial roofer so I use it for metal edge sometimes we put on a thousand feet!!

[@hazzt6298]

that rolling tool box is good but how would it be trying to open on a uneven surface.

[@ToolShow]

It wouldn't. You'll need a flat surface, and you'll need to keep at least a small area of it swept. :)

[@nildefonsop]

If I win the lotto I am not telling anyone but there will be signs

[@Choko-hc8gv]

Thanks for the video 😊😊

[@krazyfishkeeper819]

How much and what was the release date for the rolling drawer packout?

[@dannyboy111268]

I was wondering if you could use those speakers to communicate to workers ?

[@benfowler2127]

I was just thinking a couple days before pipeline that a battery pack light would be really nice to have. I’m happy to see they made one, but it’s not on OPT’s site to pre-order. Neither is the 7 1/4 rear handle or the new power head for OPE. I really wish these things were more readily available sooner. I understand getting people excited, but as Jim Gaffigan once joked, “I’d like the cheesburger… Where is it?” 😂

[@IRAKLICHIKHLADZE]

4 hours, that is so crazy, so crazy that it is mad

[@LukeWalsh-o8n]

Do they have a power washer?

[@scottmorris4914]

was just going to say, the audio issues seem to have been occurring when both mikes were together, but the Milwaukee guy beat me to it. But it shows I am listening.

[@Billy_bSLAYER]

He is clipping his mic input, which can be adjusted.

[@GordonWhite-k1c]

I missed the live video but when is the wall chaser arriving for electricians

[@danielsoutdoors]

Packout wrench 🔧 kit sold separately ?

[@Igor-q3f]

Hope Milwaukee will get a 10k lumens light like Bosch or Scangrip has. Painting contractor really need that.

[@tylerburden5144]

Was hoping they had new sanders but literally just looks like a rebranded bosch was hoping for something more comparable to a festool

[@4468861989]

My poor speakers

[@s.n.9485]

I like that slim rechargeable light that can fit in your pocket and has magnets. Gotta get that one.

[@AERuffy]

is there an update to the Fuel backpack vacuum?

[@toolsdealsautomobiles6980]

We need a M18 fuel 1/3 sheet sander or even a replacement for a full size air file sander

[@OneWithWolf1]

So much I want, don't really need, might be able to afford. 😊

[@bryang9158]

Yeah I have a question, what's the name of that coffee u been drinking 😮

[@jorgeespinosa1945]

You are the best

[@jdmillan8398]

What quarter is the rolling box packout???

[@Pradathepitbull]

I'm so mad I had no knowledge of the 550 model n I bought the 250 model just a month before. 😂

[@brandonmeredith4602]

Release date on the packout outside accessories?

[@mikezat6328]

Sad that there wasn't any updates to the Angler Fishtape

[@nathanvanlieshout7834]

I only just got the M12 Stubby and the orbital sander 😫 Tabless cells in M12 🤤

[@epic_donut2.5]

2:32:46 new bag packs

[@epic_donut2.5]

2:39:30

[@UpcycleFab]

I might be late…but do they plan on offering heated gear in tall sizes? Great coverage by the way!

[@phalanx3803]

bruh and i just brought the old heated gear. then again its Australia so it will be a good 3-4 years till i see the new stuff here.

[@toolsdealsautomobiles6980]

When rob looks down when taking it about blows the speaker in my phone 🙉

[@Ben-bp1zi]

More about the packouts please

[@thechad7803]

It’s okay Rob I don’t work with big pipe either.

[@gregorsamsa1364]

Nothing wrong with workin with little pipe. It's about how you use it, bro

[@92ireland92]

320 for the back pack is insane. How is it 70 more than the already over priced rolling single drawer

[@jonathanrose456]

Heated gear for lower back would be nice

[@justinjusin1]

Counting is hard ✌️Three things

[@freedomconstruction]

Gosh that nailer is sweet!

[@rowankeltizar5961]

Timestamps, pleeeease?

[@cousinzayenz]

Finally it coming!!!! M12 stuby!!!

[@bijanshahidi3933]

Any riveting tool?

[@JeremyJohnson79]

Did you both manage to eat that BBQ and keep those white shirts clean? 😂

[@ToolShow]

@@JeremyJohnson79 right?!

[@AnAvgJoe]

I literally just picked up an M12 impact 2 days ago. I'm so pissed. That new one is insanely smart. I love the power mode switch

[@bryang9158]

he asked u if u had any questions on the rear handle saw , n u completly blew him off i would of liked to have known the specs on the rear handle , the weight compared to the first gen would of have been nice

[@DeWaltManZ]

FINALLY! A rolling bottom box with 1 big donkie drawer! What took you so long milwaukee?! 🎉🎉🎉

[@TOOL_TECHNICAL]

Meanwhile makita hasn't made a new power solution because theyre trying to be samsung making coffee makers and microwaves sidenote improving the m12 mount is a huge concern with holding the battery/stressing the prongs. glad they addressed that. con is no more mode button so clicking that trigger more often means faster wear and tear. Milwaukee is killing the game and only flex has any hope of catching up at this point. DeWalt's new hammerdrill is from torque test channel leaked, believed to be the best on the market but it took em too long especially with the complaints of honoring warranties and bad customer service to many tools.

[@benelson234]

Will they ever make a concrete nail gun?

[@lukemullen7674]

they did if i’m correct

[@janaojana1061]

im Bangladeshi. Love YOU tools.❤

[@MrIMCP]

Oh that new chainsaw is awesome! I have zero need for it.....but.....

[@MeowMixDinner]

I hate Milwaukee...now I have to spend money

[@Lostin2024]

Bummed out on the DJI microphones you’re using. Wanted to get a set for myself after seeing a bunch of good reviews, but if this is real world usage I might have to skip them and get the Rode mics instead. Content was great, sound…not so much.

[@ToolShow]

We had a few issues for a few reasons. We were forced to buy the DJI II on the way to the event. Sarah used our first gen DJI mics for our show footage. I used the new II for live, and never got to set them up. Second, I kept putting them next to each other on my badge before I discovered that was detrimental to quality. Lastly, our WIFI was not reliable, and caused problems in the stream. We have owned and used several Rode sets, and would chose the DJI every time. It’s far superior. I just needed to setup the new set to avoid peaking. That’s on me, and due to our rushed schedule. It will work better after setting it up.

[@Lostin2024]

@@ToolShow thanks for the reply. Sorry you ran into issue that were out of your control. That’s gotta be frustrating.

[@ToolShow]

@@Lostin2024 you’ve no idea. If I can’t produce a high quality stream, I rather not go live. I own the mic problems. Won’t let that happen again. But the WiFi is supposed to be “world class”. It wasn’t. Really want to build a cellular backpack and split the feed up over 4 phones. Stop relying on WiFi. But that’s expensive.

[@steffendetrick]

I’ve heard all this from Milwaukee before like the GEN4 was the strongest drill/hammer drill on the market period… it wasn’t

[@LightingUpTheAbyss]

That $600 outlet splitter will be the downfall of milwaukee

[@gregorsamsa1364]

Allright, bro. Calm down

[@ToolShow]

No.

[@coreyneufeld9418]

Milwaukee did not have an industry leading tape measure and by the looks of it still don’t

[@livingimprovements4382]

I dont understand, did he just say that air flow ads to the heat and doesnt help cooling when talking about the new circ saw motor?

[@Kikister101]

I could be partially wrong: It doesn’t add to the heat but air is a poor conductor of heat. That’s why in cars, you need to bleed the air out of the cooling system so you don’t risk overheating the engine with air pockets. Similar concept to flashlights, computers, etc. they use metal, paste or both to dissipate the heat away before air contact. Basically, the more conductive material in the motor, the faster the heat can dissipate away.

[@johnny4713ify]

Just in time saved me from buying the Dewalt 1/2 DCF921. I already own a few 3/8 stubby's, but going to upgrade to these ASAP!!!! 550ft is almost Gen 1 Midtorque territory crazy power👍🏻💪

[@dinosaur5647]

Everything there is straight up garbage . Yeah they have made slight modifications but still the same crap . The real question is when is Milwaukee going to make the metal connector hardware gun

[@brandonmeredith4602]

Does the new chainsaws come with a box?

[@Peter-jc9dq]

Y’all need a better camera

[@epic_donut2.5]

On god

[@ToolShow]

It’s the Wi-Fi.

[@user-bw5xf3yr3m]

Wow this makes me depressed, I’m a MAKITA guy.

[@すらいむ-q4f]

欲しい

[@jamison74]

Why even bring her along if she’s not willing to live stream? She couldn’t even let him have a proper lunch without having to”gimbal issues” 🙄

[@alamomonkey]

YOU LEAVE SARA ALONE.

[@g8beast679]

Man. I'm on Team yellow. But that new stubby and Milwaukee's no nonsense of what is what, has me tipping towards switching to the dark side.

[@jeffcoolhd]

That guy that was cutting the plywood is on meth or something

[@ToolShow]

@@jeffcoolhd don’t be a dick man. He’s a cool guy who loves his job and he’s great at it. No need to point out people’s differences. He’s a pro.

[@mugen2002]

YES SIR!

[@gregorsamsa1364]

​@@ToolShowthere's nothing wrong with being a meth head, bro. It's just a different way of life

[@ianevans776]

It seems to me that Milwaukee looks to be blatantly copying a signifucant amount of Bosch's best tools inovations, as well as the form factor. Especially in the woodworking category Milwaukee has entered. Their lineup is basically all stolen from Bosch. If you painted alot of these tools blue you wouldnt be able to tell me whicb was Milwaukee and which was bosch. I cant be the only one seeing this.

[@sviatoslavtulin7876]

m12 line is good, chainsaw is absolute rubbish.

[@hammyzgod]

30% more compact and 90% more unreliable, like most of milwaukees most recent impacts 😢 gone from being world leaders to an absolute joke.