Tool Truck Alternative Grey Pneumatic Impact Sockets

[@flatratemaster]

Grey Pneumatic (1226M 3/8" Drive 26-Piece Deep Length Metric Master Socket Set amzn.to/2Lef8Zq 13 Piece 3/8" Drive Semi Deep 6 Point Metric Impact Socket Set by Grey Pneumatic amzn.to/2NJXm1W Grey Pneumatic (1210UMSD) 3/8" Drive 10-Piece Semi-Deep Metric Universal Socket Set amzn.to/2PCrYFf Grey Pneumatic (1708SN 1/2" Drive 8-Piece 12-Point Spindle/Axle Nut Socket Set amzn.to/2MY8bOv Grey Pneumatic Corp 1326MD 1/2-Inch Drive Deep Length Metric Master Set - 26 Piece amzn.to/2PylHKy Grey Pneumatic 1326M 1/2" Dr. 26 Pc. Shallow Metric Socket Set amzn.to/2ZNG6el

[@AV84USA]

It says on the GP website that they will NOT warranty products bought on Amazon.

[@Steve0885]

Got that set

[@joevannyrivera]

My current impact sockets are Grey Pneumatic, Sunex and Tekton. Have had absolutely no problems with any of them. They have such good value for the money 👌

[@davidkanengieter]

I'm about the same. K-T, Sunex and GP. Have some Tekton, Kobalt and NAPA scattered in to fill gaps. Very happy with all of them. I don't like the Snap On deep sockets because they don't have a very deep well for the nut to retract into.

[@rustyjeep2469]

The top producer in my shop uses the Tekton impact sockets in 3/8 and 1/2 and highly recommend them to me.

[@joevannyrivera]

@@davidkanengieter exactly how I feel about them!

[@joevannyrivera]

@@rustyjeep2469they're great and you can't beat the price

[@That_one-guy192]

David Kanengieter I’m right there with ya on their depth. That is my biggest issue with my snap on deeps. They’re basically shallow sockets with a hollow 2 inch extension

[@steveg7425]

Grey Pneumatic sockets are my go to impacts. Can’t go wrong with any of the sets.

[@MrAKPAPA78]

Great video. Have the tools work for you. Not you working to pay for tools. (Snap-off tools) Having expensive tools does not automatically make you a good mechanic/technician.

[@ADVANCEDLEVELAUTO]

I own a set of Tekton sockets I bought on Amazon that look almost identical. They even came in the same case, only red instead of blue. These sockets are an awesome deal! Good stuff!!

[@ekaufman9565]

Love your video been using your advice to improve myself in the automotive industry and I can use some new sockets to put my father hand me down to a rest

[@karlstephenson776]

All these great tool alternatives help make getting into the mechanic trade easier and cheaper. I show these videos to my classmates when they are looking for tools.

[@Toolaholic7]

Grey Pneumatic voids the warranty if bought on amazon,not an authorized dealer of Grey Pneumatic

[@mecalpsha4473]

One of the reasons to stick with the tool truck, the time chasing down warranty is not worth it.

[@kdautomotive1165]

My MAC guy warranties them for me

[@travisgustin4677]

KD Automotive mine too

[@johnkayser3151]

I love when you do your tool truck alternative videos. They are great for new techs who don’t want to buy everything off the tool truck but don’t know what should be tool truck vs alternative brand. Thank you from all the new and aspiring techs..

[@timwall6916]

I wish you lived closer to me. You really seem to know what your talking about and what your doing. It’s so hard to find a good trustworthy mechanic when you need one. I do a lot of my own repairs but now a days there’s only so much you can do as a DIYer with all the specialty tools you need. Keep up the good vids

[@severomendez6889]

A guy walks into an auto shop and says, "I'd like a gas cap for my KIA." The car mechanic thinks for a few seconds then says, "Ok, that seems like a fair trade."

[@scottsmrcka2769]

Nice sockets. I have been looking for a set of swivels. Where do you get yours warrantied when you need to?

[@rcbasher101]

I heard that Grey Pneumatics doesn't consider amazon an authorized retailer so you have NO warranty if purchased through amazon.

[@crism3304]

Honestly best channel for automotive advice I’m a starting out mechanic and your advice helped me out a lot on making choice for sockets and tool box

[@Rudy_fit]

It’s only been a year for me into the automotive industry and you helped me a lot in tips and smart tool purchases, thank you FLM

[@davidgrandstaff5047]

Great video. I have used the Grey Pneumatic Duo sockets (1/4 and 3/8) for years. I have never had an issue with them. Keep up the great work.

[@That_one-guy192]

I love my GPs. My local tool store here in Va. had a big sale on them a year or so ago so I picked up the metric and sae shallow, deep, and wobble sets for my home box. After trying them out I ended up bringing them to the shop and I took my snap on impacts home. They’re the best impacts I’ve ever used. Also, if you haven’t seen them yet check out their adapter kit. The part number for them is 103RA.

[@petethiel7129]

I enjoy your channel very much it’s been twenty years sense I was in the auto repair business. How I wish there had been available when I was in the trade but as you know once a mechanic you will always be a mechanic ( usually your family makes sure of that) but I enjoy learning about the newer procedures and tools Thank you again

[@andrewmerris4005]

Enjoy watching your videos. Always great to to see differences and similarities from the automotive world to large ag. And enjoy watching your tool reviews.

[@hoosierrifleman9633]

I love it when guys who know what they're talking about are willing to give the rest of us rookies a look at alternative options to the top tier tool brands.

[@majdmansour8646]

Great videos, keep them up. I love sitting down at night after work and watching whatever content you put out and i even go back and re watch some videos that i thought were helpful. Thank you so much and keep it up

[@MichaelMac9325]

I would be interested in seeing how well they stack up against my Sunex sockets.

[@ryankovaly3927]

I’m glad people are noticing the grey pneumatic stuff.. I’ve used the 1/2 and 3/4 for like u said years doing heavy truck repair. The 3/4 drive sockets arnt the cheapest sets but they are inclusive and they hold up great for that price. The half inch I have broken a couple due to hammering them with the socket air chiselers attachment ( ended up buying replacements ... but otherwise they have stood the test of time (8 years so far ) .. the wobbles I have from them have gotten stiff at the joints due to the usage ... haven’t warranted them yet due to the pin not breaking . Thanks for the video and I hope those go to someone in need!

[@richardsawdon3401]

I like your advice to purchase pneumatic sockets, and I agree with it generally speaking. I would only add that the reason I have not thrown out my regular sockets is because they are not quite as thick as the impact ones, and every once in awhile the difference in clearance does become an issue, so I am forced to use a regular socket instead. Otherwise, I typically go to impact sockets for everything, regardless of whether I have an air tool in my hand or just a regular ratchet.

[@Bionerd16]

I have watched your videos for years, you give real world advice for us techs out here in the field. Keep it up

[@thescottyfraizerofficial]

Been using my Tekton impacts ever since before I've started wrenching professionally and I've been wrenching professionally for about a year and a half now and they haven't failed me yet, though I've noticed my 19, 21, and 22mm are all starting to wear out. I can't remember how much I paid for them but I got them at Meijer believe it or not.

[@chase9348]

I've been back and forth on whether I should get these or sunex, still haven't decided lol

[@TheAlaskaCajun]

I’ve got a Harbor Freight set of impacts that are holding up good but I’ve always wanted to try those Grey Pneumatic sockets! I think I’ll pick up a set of the swivels in 3/8”... thanks for the heads up!

[@ZombieSpiderProd]

Those are really nice sockets. Ive been watching you for a while and have enjoyed the tips ive gotten from you and i used them in the work force and its really cool being 18 and replacing motors and your little tips have helped a lot

[@ARsandCARs]

I used to have a couple sets of grey pneumatic impact sockets and extensions and loved them. The quality is good. For the price they are top notch !

[@michaelnice4753]

Glad the hurricane didn't effect your electric. My coffee and your videos start my day. Thanks

[@Mattorwig]

Love your videos. They helped me be a better auto mechanic and helped me with my day job as a millwright. Being fast and flexible in what I am working on. Thank you for putting out your videos

[@RobertLaneTech]

I like to keep the roll cart light, and I keep mostly impacts in the cart, with one set of 3/8 deep sockets for things like batteries. I also keep a set of metric nut drivers for my 1/4 impact for quick removal of mud plates.

[@Matt-og5sd]

How do you stay motivated when the shop is slow for that 1 oil change that comes in

[@jasonpressley9711]

Love your videos!! Fellow southern technician as well. I feel your pain in the summer. Thank you for what you do for this industry.

[@NutsandBoltsAuto]

I sure could use some impact sockets :D how would the warranty work if you're giving them away? I mean, free is free... I think GP wont warranty stuff bought off "unauthorized dealers"..

[@nathanm5352]

Had a bad experience with GP had a impact met set 2 of the sockets broke and they would not warranty them. I have since then been replacing them with snap on or tekton.

[@rudydaberry122]

What’s better? Sunex vs grey pneumatic? Everywhere says sunex but grey pneumatic is more expensive

[@danohstoolbox]

I am not sure hear in Canada we have grey tools is grey pneumatic the same company i have loads of grey impact sockets and yes they are great And i have powned the hell out of them

[@jeffbarnard348]

I don't think they're the same but I own some of each, both make good sockets.

[@kendallas3705]

Has anyone had to wrty a GP tool after buying from amazon? The GP wrty says you have to return it thru whom you purchased. Just checking..

[@pjg3311]

I have a few GP sockets, my most used one is the 3/4" extra deep for air brake chamber service. Never broke one yet so don't know about the warranty process with them

[@dave0z96]

How quick do you get a new socket using the warranty, I’m a heavy equipment technician and I work on cat 992, and D8,D9 dozers so I break sockets more than I’d like to .

[@aldavis6725]

A friend at my shop got a set of 3/8 drive impact sockets a few weeks back and he loves them. For the price I can't see why anyone would run to snap on a pay 400+ dollars for a set when you can get these for a fraction of the price. Especially for the newer guys getting into the industry. Great content as always, keep it up!

[@LGrancapitan]

FRM thanks for being one of the few passing down good knowledge and the way of the trade for us young techs

[@calebhazelwood8716]

Would you recommend Grey pneumatic impact sockets or Sunex?

[@chadcaldwell6162]

Love grey pneumatic sockets. They hold up well and have a few of their magnetics that I couldn't find in the big brands.

[@shadymaint1]

I have the 1/2 drive metric deep master set. They have been used and abused hard for over 10 years. Yes some are worn out and do not grip bolts like they used to. Plan on buying another set of the same in the near future. Excellent tool. Highly recommend and will be buying again.

[@Elbanona]

Thanks for the review, will be buying these soon. Do you also have any recommendations for a good tap and die set?

[@dustinbotzum2338]

I am thinking of getting the grey pneumatic swivels or the gearwrench pin less. Any suggestions? Btw awesome videos

[@mannyactual]

I think this those sockets are awesome. I recently purchased a green 48" dominator prybar. I think it's under rated I sure would like to hear what your opinion on it in a video.

[@Plandrew]

I frequently use matco 3/8 swivel sockets, and I get about 3 uses out of each one before they're jammed and don't swivel. Each time, my dealer takes longer to warranty them

[@elmoz71ls15]

Anything, literally there I followed instructions and commented “anything” as per the request. Love the videos and honestly thank for teaching me roll cart efficiency.

[@otharwilson6585]

I'm doing a front wheel bearing job on my 2001 pt cruiser and I was sweating getting the inner race off the hub until I saw your trick using a gas torch. Thanks for the tip...

[@brandonkenyon2563]

Has anyone had a hard time with warranty on GP sockets bought from Amazon? Last time i looked into it GP didn't consider them an "authorized dealer"

[@rene9125]

Great video as always. I can't choose from the grey pneumatic or the sunex set i have been looking at lately maybe this would help me choose witch set to buy

[@johngibson3594]

Grey pneumatic has the duo sockets they need to send you those to check out they are supposed to replace chrome and impacts in one shot. Did u buy these or did they send them to you

[@mikedaugharty5544]

mike good advice. at 65 yrs old wished i knew about these options years ago. when did they start up!!?? the warr ?? do you have to mail them back?? turnover time?? money saver for sure!! thanks keep up the good info!!! up north minn. i sweat worse just watching you in the heat!!i will stay here and fight rust.mike d

[@donaldhollums3278]

Great film, FRM! Have you, someone in your shop, or someone else you know used the Grey Pneumatic Duo-socket sockets yet? I heard some good comments about them on another channel and this other mechanic has been using them for years. I'm considering, over time, getting all three drive sizes to replace all my chrome and impact sockets. Doing that would save some tool space.

[@abelgonzalez9292]

I have just about all Sunex sockets but I haven’t purchased any mid length sockets wouldn’t mind giving them a try

[@stacydornan9765]

My Dad worked for Grey tools over 40 yeads ago,had thousands of dollars of Grey's tools myself for over 30 in my Truck mechanic days.They still can't be beat,lifetime warranty on all there tools.Still have a factory in my Hometown of BRAMPTON Not Canada

[@TheWrench97]

I've used the Gray Pneumatic for 12+ years in 1/2" metric have only had 3 fail both 21mm but while using a 3/4 " adapter and air impact on spring hanger bolts(also broke a SO and Tekon on the same bolts) and a 18mm deep which gets a lot of use

[@kennethblankenship7080]

Your videos are always short and to the point. Great way to start the day. I have learned alot about the industry and tools from you. Thanks for the content

[@wyattoneable]

I love my Grey Pneumatics. I saw them first on Eric the car guy channel in 2016 and they have performed flawlessly. Thanks for the information Mike.

[@93sundance]

How do you get those warrantied? I bought a set of Sunex sockets from the internet and later found my Mac Tools guy can warranty them and does.

[@jiminguo7700]

Also good are Grey Pneumatic's duo-sockets.They are as thin as tool truck chrome sockets; and can be put on a impact wrench. Also notably, the 3/8" "deep" duo-sockets are actually semi-deep.

[@anthonyb8691]

I assume you prefer the Matco pinless design?

[@johnnypruett7169]

Thanks for all your hard work showing us what really happens at a auto repair shop !!

[@davidbodkins8986]

Great advice I have some magnetic sockets I use on dash work or inside doors where u don’t want to drop anything.who do you get your warranty through the manufacture? I buy a lot of stuff off amazon and warranty gets sketchy

[@tylerars24]

They got the sizes stamped on them? I've got some 10-15 year old craftsman USA impact sockets. They were laser etched and stamped. Most of them only have the size stamp left. I'm looking to get a 3/8 metric semi deep set, but worried about the laser etching wearing off. Thanks

[@timbrassinne719]

Just recently brought several sets of GP sockets and a master 3/8 sunex set. Pittsburgh pro in 1/2 non swivel are actually really good too. I've had my set for 5+ years and use them daily with no issues.

[@nikn8950]

Bought a set of 3/8" adapters with swivel at least 5 years ago and have loved them. Been looking into mid length sockets and these would be a great addition to my box

[@marshalanders6472]

I currently use harbor freight impacts. How different are the gray’s from harbor freights?

[@Rockmonkey96]

Enjoy watching your videos, as a young tech your stuff has shown me effeciency and people managment tips and tricks that come in handy. Keep it up!

[@Jonathan12812]

What are your thoughts about Astro Pneumatic or Sunex? I've been indecisive these between these 3

[@fuzzytek2794]

Yes, decent mid length impacts that aren't SO. Now I have to check them out in person.

[@ZynovFTW]

DeWalt makes a 1/2 drive impact socket set metric on amazon for $80 i believe. It comes with all sizes up to 32mm i believe. Good deal on them too. Shallow.

[@rustybrowneye]

I recently broke one of my Duo gray pneumatic sockets. I just contacted them yesterday about warranty. It looks like the warranty might be a pain in the dick since I bought them off of Amazon and not at authorized dealer. How this warranty process goes will determine whether or not I keep using gray pneumatic..... we'll see

[@gregblau8082]

I'd love some mid length impacts. The only ones I've seen before are snap on. Recently got the gearwrench all 10mm set and I use the mids way more than I expected.

[@Oldcoinsandstuff1]

What do you think of their duo sockets? ( thin wall impact rated )

[@llbigdn757]

I love your videos. I found you right before I got into automotive, I've been a GST for a little over a year. I start my automotive program at a vocational school next Monday. Thank you for helping me manage my expectations, understanding pay, and navigate the many personalities in the shop (ie shop divas). Keep making good content and dropping gems. Peace ✌.

[@fers14thligion]

Thanks for all the advice , I'm a new tech for Lexus, and thanks to your videos I have bought good tools for an affordable price, keep it up .

[@knasasduckkiller]

Love my GP stuff. Have had the 1/4-3-4 drive sets on my service truck for years and no complaints. Just got the 1 inch sets for my new 1 inch Milwaukee this last monday.

[@dereckhaugen3600]

Gray makes great sockets. I bought a set of their thin wall impact sockets and love them.

[@jamesfabijancic250]

Great video. I have really started migrating from tool truck brands to some other brands thanks to videos like yours and Eric O at SMA. Keep the content coming!

[@kcfer99kc]

So who warranties GP? As far as the tool trucks, or do I have to go through Gp directly? Cuz I’ve used GP sockets for years now but have never needed to warranty any yet, anyways great video I hope I win.

[@ronaldmorris7908]

Great advice and encouragement! Thanks for sharing about grey neumatic impact sockets. I am following your advice about impact sockets first. I realy find all your videos very interesting. Thanks for sharing!

[@tylerrussell6415]

Love your honesty and how your straight forward about tools. Really helps the younger guys in the trade out.

[@prakashchander6914]

sounds good what about chrome ones?

[@DEmechanic2000]

Really love your videos , I’m 18 years old and new in the industry and your videos are great advice to me

[@garrettarney2903]

So I don’t have any metric impact sockets yet but I do have sunex sae impact I’ve used for about 3 years before switching fields and now I don’t use them. How would you compare the grey pneumatic to sunnex?

[@rushjones94]

Great advice for the techs starting out, when you can get quality tools and still afford the quantity of tools you need everyone wins!

[@B1G5L1M]

They really are great sockets. I've been using grey pneumatic daily for years. The swivel sockets cannot be beat for the quality and price point.

[@rudydaberry122]

SUNEX vs grey pneumatic. Which is better

[@adamcoble6632]

Excellent info! I am amazed by the information you have been providing for the rest of us in the industry. In our geographic region, we are unaware of several of these tool manufacturers that you have recommended, due to the lack of distributors and vendors. Keep it up.

[@ryanbaumgardner8583]

Just bought the 1/2 set , 10-27mm shallow from my s&k dealer. Saved my bacon on TWO leaf spring shackles on my brothers 01 blazer. The cheap chrome set I had for home were just a hair too deep from the passenger side right next to the evap canister.

[@ericl7007]

GP is also good for the DIYer you can get them off the tool truck at some local tool supply places and aren't much more than the cheaper house brands in the long run

[@T6Tarek]

I absolutely love my grey pneumatic sockets, 80 percent of my impacts are grey, the only snap on I have in impacts are the few thins that were on special buy one get one. I just picked up a set of duo sockets, the thin wall is great.

[@mouf32]

I have the 1/2" set at home and used them to rotate tires. Great little set

[@procyonia3654]

They also make some impact sockets that are almost the same outside diameter as the chrome ones. Think they are called duo plus or something similar, I love their stuff.

[@kevinw6525]

Right on! The majority of my tools do not come off the tool truck. As long as it's lifetime warranty and a quality tool I'm good with it.