Hey Rob, I would suggest getting brass tweezers or a good set of tweezers. I can't live without my set, but it can always be substituted for rodico to pick up non-heavy parts like handsets. I personally feel more in control with tweezers since its not malleable like rodico - sort of like an extension of my hands. Also, check out the bergeon 2461 for the screwdrivers. Some people just like to replace the blades if they get damaged but I found it really rewarding to know how to dress screwdrivers. The sharpening tool will make it easier to retain a consistent angle for sharpening. Pair it up with a india stone + arkansas stone, then you'll be able to maintain those bergeon heads. I get so much satisfaction knowing how to take care of quality tools.
@RandomRobReviews5 жыл бұрын
Tweezer upgrade sounds good. I hate doing hands though.
@stephenscharf62934 жыл бұрын
Excellent advice.
@Yakena15 жыл бұрын
Thanks again for sharing your knowledge and lessons learned. It has saved me from doing things the wrong way.
@noelmurphy34505 жыл бұрын
Thanks for the useful information Rob. Cheers Noel
@drwindsurf5 жыл бұрын
Thank you Rob...I have slowly increased the number and quality of tools I use. I need to get a set of the Bergeon hand setting tools...I find the cheap one seems to cause more problems than it is worth. I agree with you for things you are using repeatedly it is worth getting better quality tools :)
@redsince754 жыл бұрын
Thanks buddy. I was searching for what tools to start with. I intend to replace some watches of mine with upgraded movements then maybe even custom build my own watch.
@anasaly25495 жыл бұрын
This is the road I'm afraid to take. Good job Rob.
@RandomRobReviews5 жыл бұрын
Trust me, wasn’t long ago I wanted to get rid of it all. I even swore off modding. Had a run of bad luck.
@TennesseeMike5 жыл бұрын
Esslinger has the small forks the cheapest I could find. I ordered an extra when I got my Bergeon. The also have good deal on Spring Bars. Good content thanks.
@oscarmason32525 жыл бұрын
Thank you for this video, been interested in watches for years but could never gather the nerve to try to work on one, maybe this will inspire me
@buzzufy2 жыл бұрын
Those are great tools, this is very helpful to those into watches as they will have the idea of what to buy. Thanks for sharing!
@joshuaevilsizer5 жыл бұрын
Great video! Would love to see more videos of you actually doing the mods (I've enjoyed seeing the ones you've posted that are unedited so that we can see the whole process you use, the good and the difficult). What is the aqua and white stuff that you say you try to keep bagged up because it goes bad? Sounded like it was for cleaning, but I'm unfamiliar with it. Thanks in advance, and thanks for putting out such great content.
@RandomRobReviews5 жыл бұрын
I will try another build soon maybe live. The “putty” is Rodico and is for removing oils and dust from dial and hands mostly.
@Kingstonsmac5 жыл бұрын
I was just online looking at good repair kits. Thanks for vid! 🤙🏼
@Redonepunch5 жыл бұрын
Quality of tools makes all the difference. Especially with something difficult like watches. I want a set of those screwdrivers. Bought some generic ones from amazon and they’re terrible
@xxraverxxonxtacy5 жыл бұрын
Wow such dedication to Horology.
@EhRandomGuy5 жыл бұрын
No loupes! I'm surprised!
@RandomRobReviews5 жыл бұрын
Maybe one day. For now I use +3 reader glasses.
@RonSamson5 жыл бұрын
@@RandomRobReviews What a great idea.... thanks
@mistersiau3 жыл бұрын
to mod a watch, do we need a steady hand ?
@jonoedwards41955 жыл бұрын
No Blu Tac? A big chunk of Blu Tac is Unreal for Casebacks an holding or sitting bits on! I saw the Hammer and swore I could use one of them sometimes,,, AHAHA. That Crystaltimes Non Seiko You created was Sick Stuff for an Amature? Unreal Bobby.
@Jon81G5 жыл бұрын
How do you use blu-tac? You use it to actually remove casebacks? I'm interested to know because I'm tired of scratching mine up!
@GunFanactic5 жыл бұрын
What is the name of the screw down press and where did you get it?
@RonSamson5 жыл бұрын
On several of your videos you have used the Seiko Turtle preset back removal tool (yellow round head with brass? protrusions, white handle). Where did you get this? I have looked all over the internet to no avail.
as nice and great as the bergeon stuff is, at least for the non-modding stuff like replacing batteries, replacing straps and bracelets, and sizing bracelets, i do feel like the cheap chinese tools really can get you far for a fraction of the price. i bought a set of 5 screwdrivers like yours for
@maxellis12225 жыл бұрын
I am just starting my collection and im buying a seiko diver. Do you recomend a padi or a monster?