Top 10 Knife Deals Happening Now | 2024 Holiday Gift Guide

[@jamesgoodlet6554]

It's crazy that the CJRB knife with S90V is $15 more than the demco with plastic scales and D2 steel!

[@phil2082]

The wonders of Chinese slave labor.

[@chrisjosekuehl]

The shark lock is really amazing. I’ve really beaten the crap out of my 20cv, 3v and k110 variants. I’ve batoned, chopped, done some prying of bark and used the tip to do some drilling. The lock doesn’t care what you do, it never comes loose or has any play. I’d agree they are overpriced but not so much when you get to higher grade steels. The aftermarket is very good too. I’ve got a set of titanium scales, and a set of aluminum and a micarta set, plus I’ve upgraded the hardware for pretty cheap to titanium. If you haven’t had the chance to handle one I think you’ll see what the fuss is about after you do.

[@chrisjosekuehl]

Plus the 20.5 is made in Taiwan and the Cjrb is Chinese.

[@landofpc]

on dlt demkoi is for 80 but aus10

[@A3rngcrcs]

It’s crazy for sure the big Chinese companies are killing it, would be nice if we could compete.

[@ajmprovidence]

That cjrb hectare would be 290 bucks if it had a butterfly on it

[@shoshinman]

I picked up a skeletonized wharncliffe MKM Makro a while back. I cut a maple piece of maple and fit it into the handle opening. It makes for a lower profile grip that works well. No screws needed either. Also made a Kydex sheath. Great steel and knife.

[@iansclone]

This is the channel I watch when it's time to give myself a knife, but I'll play along

[@flannigan7956]

Wellzir my knife buddy's gettin hiloday goods crammed into stocking and the rest we can just use the Santa Bunny for a culprit

[@bmljenny]

My shopping is usually one for them, one for me.

[@kushviper]

Happy holidays, y’all

[@iamgroot4080]

🎶 Last Christmas I gave You my heart, but the very next day, You gave it away 😲🎶

[@MatisseStLaurent]

It’s my experience that the individual knife manufacturers have better sales than e-retailers.

[@flannigan7956]

Grab up an Arctic Storm Hectare if you have small fingers and like the less-tough more-hard steels. Bout the cheapest s90v you're gonna get and my handle came with beautifully-even FatCarbon. If you can get your finger into the compromised flick hole area it counts as a plumb Bugout destroyer, fabulous carry

[@dwaynechristensen6449]

Your idea of a Deal. Is way different than mine.

[@DualFury]

My go-to gift-knife is the baby banter, can’t go wrong

[@jimbob5376]

I have a couple of these - the MKM Makro is a great pocket knife - mine is in carbon fiber but not the KC exclusive version. Feels great in the hand and the sheath, once it loosens up, works very well. I also have the Boker Kwaiken Air Mini Exclusive. I really love the looks and the upgraded blade steel. Unfortunately, the flipper tab is very iffy. It'll open with no problem a few times, then jam up and be next to impossible to open. I've oiled it and loosened the pivot screw, but the issue remains, and I've read other reviewers state the same. YMMV.

[@hoomanmostofi464]

I would be curious to see ur christmas knives, meaning the ones u bought or ones gifted to you for christmas

[@timtitus2532]

Got all Leatherman style multitools I'm ever going to need. A Swiss army knife from Italy? Nice blade steel... Bought the Kwaiken full sized version back when you guys first had them in the Gold and red handle, first knife I purchased in S35VN. Good video David and Thomas. Thanks

[@funkyskibo]

Those prices are CRAZY!

[@waxknucklebearingjuice5592]

You must be new.... shit gets wild...

[@landofpc]

crazy height

[@randypangborn7213]

What no slip joints? The pocket fixed blade looks uncomfortable to me but I have not tried it yet.

[@iamgroot4080]

Hey DCA, I was wondering... What's so special about the magnacut steel? Does it have any special properties?

[@jdwills11]

In the same spirit of this gift guide video, I've been wanting to gift my wife (and myself) new kitchen knives. I like the idea of buying 3-4 knives from different brands that will do almost everything in the kitchen (chef's knife ~8", santoko or small chef's knife ~5", 3-4" pairing knife, and long serrated knife). I also really like some of the fixed blades I've seen this year... Would you recommend any fixed blades for kitchen duty?? Since I'm only looking to buy a few knives, I'm ok with spending good money on good knives.

[@dakken74]

Will you guys be doing a black Friday sale on the website?

[@gregward8234]

I had Kershaw skyline awesome small knife to carry

[@paul022887]

Are there any balisong/butterfly knives with pocket clips? They dont have to be amazing flippers, but still something that can open with some momentum. I think it would be fun with edc a usable balisong.

[@real_tuman18]

Any chance to see MKM Campo 8 in black again? I like the tool set very much, but burlap is not for me

[@knifecenter]

No plans at this time, sorry -DCA

[@andrewkruchoski7757]

// i've just been reacquainted with my old Wave, found it in my storage unit after 13 years apart...

[@alexandregraulle607]

At this moment, i've got to finish my collection with the Vosteed Psyop, the Marten. And the Kunwu X Padre ..! ^^

[@drzandlcp]

That blue demco fixed blade looks identical to a $20 shrade slash old timer I owned as a kid in the 90s😅 it had a green handle so obviously completely different lol but for real it wasn’t made out of no Demco fancy metallurgy magic it was cheap though

[@williampontious7075]

The boker is just a copy of the CRKT Executive knife......

[@stonefox9124]

😂 I haven't seen that over priced Kershaw sell out once!

[@alexandregraulle607]

It's a good idea to upgrade the Hectare. His fat carbon handle make me think of the Rubato 4 handle. And the blade make me think of the Miguron Moyarl, or the Racoon ..! ^^

[@StarDarkAshes]

What I don’t understand is that no companies let you break up payments in a way so that even if you have poor credit, you could still buy stuff and what they could do is they could penalize you for half the cost or a quarter of the cost if you don’t end up paying the whole thing off and then what they could do is not send you the item until you pay the whole thing? So it’s like layaway. Personally, my credit stinks and the thing is when your credit stinks chances are you probably don’t have a great job or it’s hard to get extra spending cash for stuff like knives. But if you could reasonably spend like 25 bucks a week or if you’re really poor 25 bucks a month For like $100 knife and then at the end of four months after you send the last payment they can send it. Nobody does that.Sezzle only works if you don’t have poor credit. Amazon should do that too. A lot of times they see something really nice that I want and and it would be great if I could just send $25 today and then you know like $25 next week or even next month and they should give you like six months to pay it off and if you don’t pay it off then they should at least charge you the amount of profit they’re making off of the item. Like say they get a knife and they pay $20 each for the knife and every time they sell a knife they make $20 if you don’t make your payments in time like at the end of six monthsthey could either give you the option to send you back whatever you paid over it back to your credit card all while keeping what they would’ve profited off the knife anyway. This way they might even be able to profit off a knife twice.😊 so if you paid like $25 and then you ended up getting arrested and you went to jail for five years and you couldn’t make another payment they would still get to keep the $25 and the knife😂 and the thing is if there was another company like Sezzle that was willing to do something like that what they could do since they’re providing the service as they could keep the first five dollars because it’s not gonna hurt the company selling the knife if the person forgets the payment or never pays for any more payments because they’re not losing money on the knife. The only thing that I can think of is like if it’s a really limited edition or something and they only have like five in stock then OK that’s a different story but if it’s something that in six months it’s not gonna matter cause they’re just gonna get more like say it’s a CiviV knife so it doesn’t really matter. It would just be a great way for people to get some grail knives that they’re never gonna have $500 for for instance.

[@MrBeefy-og7nw]

Could you mention country of origin in your knife description?

[@BjCmeadows]

If he doesn't explicitly mention American made, then you can assume China

[@davidgarrett5671]

@@BjCmeadowsOr Italian, or German, or El Salvador. It is easier just to go to the list here, click on the one you are interested in and get the information from the website.

[@0scarm19]

Just buy the FIELDMASTER‼️🤟 N a BUCK 110 🦌

[@gordonmacdowell8117]

I try to stay away from D2, unless it's a knife done in low production numbers or CPM-D2. I chose the AUS10A blade version of the Demko 20.5 and have no regrets.

[@The4cp]

I don't understand the AD 20.5. The AD 20 was the proper size knife.

[@murvinlcpeoples7408]

No. You're not the only one that is a skeptic on multitools.. I've had about 4 or 5 leathermans. And I've got to say I'm all but almost done with them. To me leatherman really misses the mark above all on comfortably period! Blocky and uncomfortable...My go to is the bucktool 360. Comfortable in hand does the job. Sadly don't make anymore. Wish the would pick it back up and improve a touch.

[@BVIAS]

A pleasure to watch a video without Thomas’s smart-alec remarks.

[@LonnieHutchinson90]

Can’t wait for that S90V Shaman!

[@stephenbarabas6286]

I think I'm the only guy that doesn't want anything to do with a multi tool.... They don't do anything good.

[@induet1me]

I agree with you on the inconvenience of carrying a multitool, but it's especially useful in the car or kitchen. Instead of having to run to the garage or shed for a specific tool, having one on hand can save a lot of time and hassle.

[@mokgable]

I'm the same way

[@jax3695]

I mean, they definitely have their purpose for the sake of convenience. Though I don’t like having to carry one either.

[@stephenbarabas6286]

​@@induet1me what is going on in your kitchen that you need pliers, wood saw and screwdriver? 😂

[@chuddlefunk3352]

Truth

[@CarlSanford76]

I spend too much money on knives to go to even a less than fancy steakhouse.

[@Capin91]

Yeah no multi-tools for me thanks.. I just have the real tools at hand too often, and real pliers(or any other tool) are infinitely more effective

[@davidroberts2201]

Never understood the fascination with multi tools - pretty useless if you ask me. Just use the proper tool for the job.

[@ElStriker777]

🔥👍

[@kennymckown8603]

No 👎 I'm with you ! , they do nothing good , multi junk 🙄

[@ben9and1-3rd]

👍🍻

[@unfi6798]

Cowabunga.!

[@valeriypykhalenko3113]

👍🔪

[@martijndaems6503]

My top deal was a magnacut mkm.yipper