Top 12 Most Viewed Manufacturing Working Process Mass Production

[@StrangerInAStrange]

The Internet has questions! @4:23 What are these point/hook kind of things used for? @55:35 What are the red painted wooden rounds used for?

[@thevintageaudiolife]

اللہ پاک محنتی لوگوں کو سلامت رکھے۔ زندگی ایک جدوجہد ہے لیکن کسی نہ کسی طرح خدا فراہم کرتا ہے۔

[@Владимир-э9ь2г]

Спасибо❤❤❤❤

[@ИльясСеитов-н8ч]

я просматриваю такие фильмы. Молодцы, все могут, и руки золотые. Не буду говорить о технике безопасности. Но удивляет другое. Они могут время от времени провести субботник, убрать помещение, почистить станки, обслужить их. Ходят в тапках по кирпичам, обрезкам и стружкам. Хотя, это их воля. Успехов вам мастера

[@GerhardDoring-wm4fj]

bei Dreharbeiten fallen jede Menge Späne an wo man sich verletzen kann ,wo ich als Dreher gearbeitet habe, hatten wir ,wir nannten sie Spänemax, die die Späne beseitigen mussten

[@renepinos3236]

Is there any reason why you remove the casting from the mould that fast while it is still bright glowing. Let the material cool down gently and the surface will not be that hardened from cold air.

[@pennyturner8293]

Yes working conditions are grim,but what would these people do to feed their families if the factory was closed…easy to apply your standards from where you are sat.

[@RumMonkeyable]

Safety and a clean workplace are absent in 99% of these manufacturing/production sites. The situations are sad. 😧

[@bhavikvadariya3882]

Is this Indian?

[@RumMonkeyable]

@@bhavikvadariya3882 Nor sure. Pakistani? ❓🤔

[@bhavikvadariya3882]

Pakistani manufacturer

[@RumMonkeyable]

@@bhavikvadariya3882 Thanks!😀👍

[@r0nin783]

Что бы жители западной Европы и северной Америки могли поддерживать высокий уровень жизни весь остальной мир должен прозябать в нищете

[@ColinWatters]

9:02 Perfect casting. Right down to the Honda logo.

[@IM358]

I strongly believed, they have to wear safety shoes and face musks for safety.

[@manditrrr]

Amazing those wood working guys still have all their fingers.

[@77gravity]

They only show the ones who do.

[@SPECTRE367]

It's a wonder any of them has eyes, toes or fingers! I guess those few extra coins to ihe Imam must be doing some good. Who needs PPE anyway? 🙄

[@rafiqkatana]

What's the point of throwing something on the floor only to have to pick it up again to take it to a new area and do the exact same thing? Do they just enjoy making more work for themselves or do they just not understand the concept of Double Handling?

[@77gravity]

Agreed, that bugs me - I'm a factory worker, minimizing wasted effort and time is an essential and BASIC part of efficiency - keeps costs down, improves product quality. I know they can pay some kid $3/year to pick up those parts, that's not a good reason though.

[@stevo68]

I do it in my job, as an engineer, because I'm too lazy to do it twice.

[@affidavitdonda]

@9:04 Honda :))))))))))))))))

[@paulmcnamara6325]

There ok, let them do there own thing, great workers!no moaning just get on with job!😅❤

[@donnadees1971]

What are These trays with a pipe?

[@awaisahmad6338]

Amzig bro

[@melds14]

Wow good job

[@troth6251]

Hard workers turning out a good product.

[@digamberthorve106]

कारागिरीला व मेहनतीला तोड नाही.

[@jorgemendoza8605]

Estas personas son trabajadoras 100%, lástima que siendo un país donde abunda la miseria, sean explotados por bajos sueldos y en condiciones de trabajo infrahumana!

[@sjb3460]

You guys need to do several things to get better results: 1. after using your torch, knock the slag off the cut parts. 2. Before you clamp your round stock on the arbor, get a grinder and get all of the slag off the plates before you clamp them together. If you do that, the plates will be flat against each other. Right now, you have so much junk on the plates, they are not touching each other and they will be crooked when you cut the gear teeth.

[@annoyingbstard9407]

You don’t understand the culture in Pakistan. Nothing changes, simply do what your grandfather did.

[@วัฒนางามวัฒน์]

ลล😊

[@terryknott4055]

I can tell that Health & Safety are a priority in these businesses

[@herbiehoss]

That's not what @sjb3460 means. It's all about the accuracy of the right angle of the axis to the sidewall (should be exactly 90 degrees). When it was turned off, it was clearly visible that one of the three discs was wobbling. This disc, at least, would be scrap in precision engineering. But this Vid is not about precision but rather about rough mechanics and such small tolerances are general accepted.

[@silkymcnasty7465]

OSHA inspectors would have a heart attack seeing them working in flip-flops and no pretection of any kind. They would close that business in two seconds.

[@СлавикАбасов]

как у нас до революции

[@들새-e9v]

장갑.안전화.마스크착용해요.여차허면.디지던지.반빙신되요

[@mortenmyhrmoen7592]

🇳🇴👍👍

[@ligip7159]

Вы серьезно, разрезать профильную трубу, на которую была затрачена энергия, выпрямить в сомнительно плоский лист, а потом порубить на треугольники хрен знает для чего? Отходов другого производства нет?

[@Hokay01]

lol why is there a chicken in a cage next to a guy braising a muffler?

[@STANPAN772]

Irytująca jest niedbałość o jakość i bezpieczeństwo. Przełączam na inny film

[@siddiquiaalaminetwork5396]

جزاک اللہ

[@digamberthorve106]

हा कारखाना कुठे आहे.

[@Shirl15239]

Most everything they make they toss in dirt on the floor

[@sjb3460]

Do the workers in the videos get paid for being in the videos? I bet the owner of the "factory" keeps all the money and gives the workers an extra slice of bread as a bonus.

[@gummansgubbe6225]

You know the answer to that one. Workers get treated like nothing. For workers in the western part of the world there were are a short relief from 1776 until now. As USA is failing we all going back to the good old ways,

[@honda2555]

Um bei Ihnen Sauberkeit zu erreichen braucht es einen Radlader , um alles auf einen Haufen zu schieben . 😢😂

[@sjb3460]

Don't you guys know how to engage the feed on a lathe? If you did, you wouldn't have to hand crank the cutting tools.

[@DGAWDGAW]

With such old and neglected machines, probably it is not working.

[@sjb3460]

@@DGAWDGAW I hadn't thought of that, makes sense.

[@billandbenny]

neandathol man was more advanced

[@ЮрийКолесник-р7р]

Ти не простудишся босиком по холодним камням батон даже и летом хоьоден ,простиниш зуби будут болеть.??????

[@ammarsheikh5802]

Amzing

[@larrykostopulos1332]

No OH&S here but they are the ultimate recyclers for sure. If you steal away these workers to a modern factory with decent wages you would still make a fortune.

[@savdjcbs]

Ну они правда гордятся своим трудом. До чего ж бедолаг англо-саксы то довели.

[@еагенийпупс]

на стоке СССР нописоно

[@timonreikin7088]

Раньше ремонт после гарантированного срока работы был запланирован, неоднократный. В СССР. Сейчас запланировано выкинуть, после включения.

[@MirzaG-mj2kc]

🎉

[@isidroantunes5642]

These people are masters of recycling,and Those toilets remind me of when i was in primary school 50 years ago😂

[@еагенийпупс]

техника безопасность у вас ноль

[@KadriDauti]

this it sheet

[@sheikhshahraiz3185]

Ok

[@ВикторЦерцеил]

Страна на коленках из металлолома глиньі творит чудеса и двигается вперед а мьі в цєнре европьі идем в каменньій век Слава прогрессу Коментарии не принимаю

[@МикЛев-ф2я]

Нана технологии. Не стреляйте в музыканта он играет как умеет

[@timonreikin7088]

Сервисное обслуживание глушителя и чуть позже стартера , это вам не это. Профессионалы с рождения.