Top 15 Plastic Repairing Tips and Hacks That Work Extremely Well

Hello everyone! You are watching video "Top 15 Plastic Repairing Tips and Hacks That Work Extremely Well"
I hope you enjoy watching my video!
► Subscribe: bit.ly/Creatio...
On Creation Holic channel, you can learn various inventions, science projects, crafts and DIYs teaching how to reuse or recycle.
© Copyright by Creation Holic ☞ Do not Reup
#diyprojects #plastic #tips #welding #plasticwelding

[@Alotipsalo]

"Absolutely brilliant! I've struggled with plastic repairs in the past, but this video has opened my eyes to a whole new world of possibilities. The use of materials like clay, charcoal, and even metal wires for reinforcement is genius. Kudos to the creator for such innovative solutions!"

[@creationholic101]

You're very welcome!

[@yd1cuj]

@@creationholic101 what type of clay you use? is that polymer clay? plasticine clay? or the real clay?

[@Tips365day]

Great creativity

[@Peppymoke]

​@@creationholic101 Could you please answer which type of clay you're using?

[@mclopesjr]

Greetings from Brazil and thanks for sharing! I made my first repair yesterday, using stapler clips for anchoring a broken fan base. But I have 2 suggestions: 1) Please emphasize that the glue must have low (or very low) viscosity; 2) Please add a warning that melting plastic can generate toxic, asphyxiants (such as carbon monoxide), or even poisonous substances (such as cyanide), depending on its composition.

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@crismorales6147]

Cuál es el súper pegamento en Argentina...?

[@АлександрСлаутин-б1л]

7d5d😮7dddxxxxxxz 13:21

[@draalchemist]

​@@crismorales6147 cualquiera como el loctite o super bonder, o la gotita de poxipol. Tienen que ser pegamentos cuyo ingrediente activo sea cianoacrilato.

[@RiverAlph]

@@crismorales6147 la gotita (si es que existe todavía) - o cualquier cianoacrilato

[@sergioavilaelviro]

Alguna de tus ideas me parecen absolutamente geniales. Y las pondré en práctica en algunas reparaciones que tengo pendientes. Gracias por tu contenido Saludos desde Madrid, España

[@creationholic101]

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

[@williamabunado9406]

I'm a self-made handyman in the house. Over the years I have accumulated a lot of broken/discarded plastics from broken appliances, gadgets and devices. I never throw these because I can really use these for various repairs and improvisation. The lead of a pencil, baking soda and styrofoam applied with super glue will be helpful in my tasks. Thanks for sharing.

[@creationholic101]

"That's awesome! Your resourcefulness with broken plastics is inspiring. Thanks for sharing your handy tip with the pencil lead, baking soda, and super glue. Keep up the great work!"

[@manoranjanlenka4241]

@@williamabunado9406 I think everybody should follow your footprints.Because Ur also helping to reduce the garbage.Thanks for your effort.

[@savoiramur]

Why baking soda?

[@TurtleWaxed]

6/15 tip for fixing a broken gear totally ROCKS! Love it! This tips video would be even better if you identified what type of plastic each was made from and which mix you use for which kind of plastic. That would put this video over the top as best plastics repair video!

[@orazha]

We used to use a hot air plastic repair gun (not homemade) to repair cracks in polypropylene. I suspect that you can use any thermoplastic to repair others of the same kind. These are excellent ideas. If you can, experiment with different ideas. Then use the best on the real job. Notice that the video uses mostly baking soda or heating the plastic using the same plastic for fill. Baking soda seems to work better than other materials on plastic. I haven't had much luck with graphite but haven't tried too hard.

[@creationholic101]

Thank you! Cheers!

[@dez_man]

the gear wheel probably was made from polyoxymethylene.

[@Maleko48]

I hear pure dryer lint (with no softener contamination) is the bee's knees when used appropriately

[@raymondgarrison3560]

The gear idea is ingenious, awesome all the way 🤙🏼

[@tifflynn2215]

As a rc enthusiast I must say thank you for all the great ideas since 90% of the breakage I deal with are plastic ❤

[@trif55]

fyi heating nylon (most strong parts of flexible plastic in RC) makes it very brittle! Do not try and repair your RC chassis with the metal hoop melted in shown here. I've looked into it at length and there's no real feasible way to "repair" broken nylon plastic parts, the only solvents that come close are dangerous and not easily available to the public and I'm unsure how well they'd work for a repair. The best "fix" for broken nylon parts is to use metal or other plastic to make a "brace" of sorts with a flexible glue around the broken area, or by drilling new attachment points to add the brace. Basically Nylon doesn't "wet" with glue and is a nightmare to glue even in industrial assembly when they have perfect conditions. It's also flexible which is a nightmare as a lot of glues are not!

[@tifflynn2215]

@@trif55 thank you for the info every bit of knowledge gained is a benefit 👍

[@trif55]

@@tifflynn2215 I went back down this rabbit hole a bit, it looks like I was using Nylon 6.6 so maybe Nylon 6 doesn't embrittle as much with heat?

[@creationholic101]

Thanks for sharing!

[@glock21cal45hp]

One of the most informative videos I have ever watched. Thank you @creationholic101

[@wofy1970]

Hi great vid thanks, just one tip, when repairing cracks always drill a small hole at the end of the crack as this will prevent it from propogating further, even if it is repaired the crack may continue with vibrations ect, with a small hole that can be patched afterwards this will be prevented

[@creationholic101]

Hello! thanks for your recommendation. Wish you all the best!

[@SuperLegitGuy]

You just watched the MASTER of plastic repair..did it look like he needed any help? LOL

[@wofy1970]

@@SuperLegitGuy Nope but just a tip that was not mentioned in the vid, someone might find it useful

[@amodernalchemist432]

Wow!? I wish I knew of these methods earlier in life...thanks for this. Extremely useful ways of repairing split, cracked or broken plastic. So helpful

[@MariaCastillo-yi1ub]

😂que bueno estoy aprendiendo mucho me alegro

[@MariaCastillo-yi1ub]

Gracias por colaborar conmigo que Dios te bendiga

[@amodernalchemist432]

@@MariaCastillo-yi1ub ¡gracias por la respuesta! Dios bendiga y te deseo lo mejor en el nuevo año

[@creationholic101]

Glad it was helpful!

[@mochhadihadi4076]

7😊

[@user-gw5bk4rd3c]

เยี่ยมเลยครับ ได้ความรู้การทำพลาสติกที่แตกร้าวให้กลับมาติดสนิทแน่นใช่งานได้ต่อไปอีกนานโดยไม่ต้องไปหาซื้อมาเปลี่ยนใหม่ให้เปลืองสตางค์ขอบคุณครับที่เผื่อแผ่ความรู้ที่ดีๆให้กับเพื่อนพ้องน้องพี่จากฅน ครวรรค์

[@mikedalakis5292]

Thanks for sharing your amazing techniques. Over the years, I've done simple plastic welding using fine stainless steel mesh for reinforcement, but you've shown so many more useful techniques, that I'm bound to use one day. Thanks much.

[@creationholic101]

Glad you like them!

[@james_the_darklord]

​@@creationholic101 What kind of tape are you using?

[@user-rz8bv8bi3y]

Не могу дать ответ,так как нет возможности перевести комментарий 🙏.

[@marieannickdechabalier3204]

Merveilleux de voir comment vous vous y prenez que de créativité !

[@khalidhameed3696]

Sir you nailed it by showing amazing technics and self made tools and baking etc I was using common salt 4 repairing with Super glue Bravo ❤❤❤

[@capnpugwash5403]

The first of these kind of video's I have seen that actually have useful ideas.

[@creationholic101]

Thank you! Cheers!

[@rayglasscock9667]

Really have made me feel like breaking plastic parts so I will have to fix it myself absolutely brilliant thank you for your advice and skills!

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@Gamamaha]

Brilliant. It's often worth to try repairing things before throwing them away.

[@creationholic101]

Glad you like them!

[@manoranjanlenka4241]

I am from lndia & I liked this video very much.Its not only educational video but also reduce the garbage which it seems major problem in every countries.

[@creationholic101]

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

[@conyx5200]

You are truly the plastic surgeon ! Genius 👍👍👌🏿👌🏿

[@creationholic101]

Thank you! Cheers!

[@sharit7970]

🤣🤣🤣

[@DavidA.Johnson]

Get outta here! Actually pretty cool though . Plastic surgeon coining ? You're at the top of your whits aren't you?

[@ladywolfwolf]

Sometimes being the God of plastic can be a good thing. Thanks for the tips. 😘✌️

[@Tips365day]

Great creativity

[@tinkiekat]

Great tips. It would be interesting to know the types of plastics you are repairing and using in the repairs (ABS, Polypropylene, styrene, PET, etc.) It would also be interesting to know how many watts the soldering irons are.

[@creationholic101]

ABS and PP plastic soldering iron 60w

[@willemnoppen]

Wow, this is a eye opener. Thanks for sharing. Great instructable. Best i have seen for a while on KZbin! The whole is nagging over plastic. This is a great way to fix things. 😊

[@clapotisdumonde]

De Bordeaux en France. J'ai réparé avec de l'acétone et du plastic une coque de rétroviseur de voiture. Depuis 5 ans, parfait. Je ne connaissais pas les autres astuces. Merci.

[@creationholic101]

Hello! thanks for your recommendation. Wish you all the best!

[@peterkaczor1773]

Your technical and mechanical mind is ingenious. I am amazed what you can do with a soldering iron and crazy glue. You prove that, with creative know-how, most regular broken and/or ineffective items in our everyday lives need not be relegated to be thrown out. Keep it up.

[@MakeDo-Turner_Smith]

One of the best repair videos of any kind I've seen!

[@creationholic101]

Hello! I am glad you like this ideas. Wishing you all good things!

[@Tips365day]

Great creativity

[@gonzaloalbertolopera1149]

Asombroso, espectacular. No solo felicito al instructor y técnico, felicito también a esas MANOS que no están nada lejos de las de un Cirujano Plástico. Hasta pronto, Gonzalo Lopera desde Medellín (Antioquia) COLOMBIA.

[@khaledalatyat2831]

Thank you for the new information and ideas. We enjoyed it. I am from Jordan

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@ebaab9913]

Those are great tips, I have been repairing things for 50 years and I still learned stuff from you. I use more standard epoxy for strength, again strenghting it with metal screws etc., and use bluetak to mould it. My other thing to use to strenghten the joint is fibre glass tape. You are officially a "Fix-it fairy". To explain this, other people go off and do mundain things, and when they come back, it is all repaired, and they are amazed.😮

[@creationholic101]

Thank you! Cheers!

[@g.borgia5100]

​@@creationholic10132:36

[@stupidas9466]

I'm almost sixty, and in my whole life the only thing i've found that super glue actually sticks together are my fingers.

[@user-bx7kx9sp7y]

🤣👍me too

[@creationholic101]

You can use salt water to remove them

[@ericwazhung]

40years, here... FINALLY someone says it!

[@user-ni1jl7it8q]

Порно 3:02 2:50

[@gonzalodanielperez87]

😂 no pero hablando en serio es un pegamento asombroso

[@flausch9536]

"Cheers, that's why KZbin is so great. You can't find such in-depth knowledge anywhere else. Thanks for that!"

[@creationholic101]

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

[@armandolupi6578]

De verdad te felicito, me gustan las personas creativas e ingeniosos como tú, aportan utilidad y aprendizaje a las personas, felicidades

[@creationholic101]

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

[@aloyssschwarzenberg8744]

Thanks for your teachings. This is a real help for the planet, by repairing plastic objects instead of throwing them away.   Comentarios

[@aloyssschwarzenberg8744]

Thanks for your teachings. This a real help to the planet, by repairing plastic objects instead of throwing them away and polluting. I watch your channel from Chile.

[@elviscera4661]

I like the gear repair idea a lot. Creating a mold of good teeth out of wax. Clever but simple to implement. Kudos.

[@creationholic101]

Glad you liked it!

[@user-pi8cz2dm2h]

Украина город Александрия. Вопрос как по прочности шестерёнки и что даёт графит в смеси с содой?

[@Pipmen]

We have learned that you can fix nearly everything with soda and super glue 😂

[@creationholic101]

😘😘😘Thank you for watching

[@carllamb6711]

For a clever fella, you break, quite a lot of things, some great content and some great ideas 😊😊

[@creationholic101]

Glad you enjoyed

[@leenb.7936]

😂😂😂

[@andrewbassett2507]

Hahaha

[@jeannetterivera4268]

Yo creo que él ya se volvió el arregla todo de la familia y amigos

[@craftsman40]

By golly, I'm supposed to be good at this stuff, but you outdid me by miles. Kudos to you sir! Btw, I'm from the Philippines. Thank you.

[@creationholic101]

Hello! I am very happy to read your comment. Have a good day!

[@Cloony4u]

You can never stop learning in life.

[@Zentron]

I've used soldering iron to press in staple-gun staples to bridge cracks a couple times, though one of my fave methods is putting plastic cable ties into a glue gun and using it just like a glue, or filling in holes!

[@MostafaDarr]

إذا أردت النجاح: 1- لا تفكر أبداً في المناصب، اجعل همك الوحيد هو عدم العودة. إذا أردت النجاح: 2 - لا تضيع الوقت، فالوقت ثمين جداً وعمرك محدود بصلاتك، ونومك، وقيامك، وعملك، ووجباتك، وعلاقاتك، وتمارينك. إذا أردت النجاح: 3- لا تنتظر حدوث معجزة، ولا تنتظر الفرص لتأتي، أنت من يصنع الفرص. إذا أردت النجاح: 4- لا تشتكي من ألم التمارين الرياضية وطعم الطعام كالأطفال. انت محارب. تطوير شخصية تظهر الصبر والتكيف. بغض النظر عن مدى اضطراب كل شيء، تكيف معه وتغلب عليه. إذا أردت النجاح: 5- الاستمرار في النهوض بعد السقوط. أنت أقوى مما تتخيل. كل، نم، مارس الرياضة، ابتسامة مبهرة مرعبة تكشف أنيابك القاتلة، وثقتك بنفسك، وعضلاتك التي لا تقهر. أنت، نعم، أنت الذي تقرأ، خلقت لتكون بطلاً. 6- كثرة الاختلاط بالناس . يمكن أن ينمي ذكائك الاجتماعي وستصبح ذو خبرة في التعامل مع الناس، لكن عقلك لن يبدع في أي شيء (فاخلطه دون الكثير). 7- جعل شخص ما قدوة لك هو عمل يحطم روحك تمامًا اجعل من نفسك السامية قدوة لنفسك فقط، فأنت لم تخلق غبيًا بالفطرة، بل جمود عقلك وميله إلى أن يصبح شخصًا معينًا هو ما أدخل الغباء في عقلك. 8- العلاقات المكثفة. احذر من أن تجعل شخصًا أساسيًا في حياتك. اقترب مما تريد، لكن ضع في اعتبارك فكرة غيابه عنك يومًا ما حتى لا تتدمر آلية تفكيرك. 9- احذر أن تصبح كما يريد الآخرون لك أن تكون. لا تقم بتعديل أو تغيير أو تغيير أي شيء عن نفسك وحياتك. بدلاً من ذلك، عش بالطريقة التي تعتقد أنها الأفضل لحياتك.

[@not-yours-I-checked]

Plastic zip ties into a hot glue gun? Wouldn't that ruin the glue gun??

[@creationholic101]

😅😅😅I tried it and the plastic strap didn't melt

[@Cloony4u]

His glue gun must be like furnace 😅

[@Zentron]

@@Cloony4u It does have temperature control, but really you just have to wait for the glue gun to get up to full temperature before doing so, as the plastic does have a slightly higher melting temp than the glue sticks!

[@InstantPayback98]

"I love simple yet effective tips like these."

[@aemabdullah9334]

Yes, you are a genius plastic surgeon ! I was completely astonished. Thanks a lot for the ideas. From Rajshahi, Bangladesh.

[@creationholic101]

So nice of you

[@jonahstepro3909]

"Plastic Surgeon." 🤣🤣🤣 I love it!

[@luizfernandolessa1889]

Belo trabalho. Vou tentar a técnica do 1º vídeo para uma tv quebrada. No 14º vídeo, após a lixagem, pode-se pulverizar um pouco de wd40 ou similar, para dar um acabamento homogêneo na peça. Saudações do Brasil e feliz ano novo.🇧🇷

[@creationholic101]

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

[@vitorpaquito9711]

Hello, I'm from Portugal, You are very ingenious! I was very impressed with the forms of restoration and reconstruction shown in the videos you made.

[@creationholic101]

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

[@diameadozen]

From the islands or main land

[@Tips365day]

Great creativity

[@TinaShay]

I own a farm and I'm almost 60 and I'm subscribing after watching 2 video! Lots of these things could have made my life so much easier! I'm going to marathon watch today! Thank you!

[@EShirako]

There's some seriously good stuff in this video so far, and I'm not even halfway in! I like the 'graphite-embedded gear fix', too, since that'll go nicely with the usually low-friction-nylon/ptfe-embedded plastic that the gears are often made of so they don't need oil. I wonder how long it'll last, but for 'buying you enough time to order/craft a replacement', it seems excellent!

[@creationholic101]

Thanks so much for subscribing! I’m glad you found the videos helpful. Enjoy your marathon watching, and feel free to reach out if you have any questions or need more tips!

[@wilsongenrygomezandrade148]

Excelentes videos e aprendido mucho quisiera que hicieras un vídeo para pegar ornamentos de plástico para acuarios felicitaciones

[@Je360guy]

Fantastic ideas, I already have a few broken items to fix! This should be fun and save money too.

[@creationholic101]

Hello! I am glad you like this ideas. Wishing you all good things!

[@thiodorchalkias8906]

Very smart repairs of plastics!!!! Best regards from Hellas (Greece)!!!

[@creationholic101]

Thank you! Cheers!

[@debi7039]

I like the tip you made out of copper tubing for your soldering iron. I was wondering what the hole was for. Great a idea to push through small plastic pieces like a glue gun. Harbor freight used to sell a plastic repair kits with all sort of tips for melting plastic & a soldering iron, but they stopped. It's great to see a way to improvise by making your own bit, and also by using a bolt. Good job!

[@jimbelton]

Some techniques I haven't seen before, particularly the use of acetone to create a liquid patch. The baking soda/superglue trick I knew from Marty's Matchbox Makeovers. Adding reinforcing metal I've seen before on Toy Polloi. One technique he often uses is to sculpt missing material out of epoxy putty. He also custom builds parts out of styreen sheets and lego.

[@creationholic101]

Thanks so much for watching our video. Wish you all the best

[@Bespelled22]

The acetone trick is commonly used for filling cracks in 3d printed parts. The multiple methods for reinforcing plastic welds with wire, screen etc is great and solves an age old problem I’ve had with weak repairs. Great video

[@juandelacruz1520]

The best skills and tutorial video I've seen in new year 2024,, thank you for sharing this,, this is what an internet supposed to be...

[@vincentgonzales8917]

Great video so many times I've just replaced parts what a loss of money.

[@ChaleswarMajhi]

Super excellent

[@user-ii3lv9sz2p]

Гениально все!!! Золотые руки!!! Браво Мастеру!!!

[@creationholic101]

Thank you! Cheers!

[@Gibblefriz]

🤑

[@Charlie_Duz]

This video makes me want to go and break something just so I can fix it. Absolutely genius! 👏👏

[@creationholic101]

Thank you! Cheers!

[@lachezarkrastev7123]

Great work - I consider myself a good repairman, but this is sweet !!!

[@creationholic101]

Glad it helped!

[@user-kb8vf9dz6o]

Es muy maravilloso tu enseñanzas mi amigo yo soy de México

[@user-he7gr9pj6f]

بارك الله بكم وجزاكم الخير

[@ChristianThomsen-dv5lv]

Christian from Denmark here. I lerne so many new ways of plastic repairs to day, just by looking this video. Wow this is so good. I for sure is going to follow your Videos in the future. May you live long and prosperous. Good luck for you.

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@Daniel_Antonio_Arellano782]

You pretty much covered everything! Great job It is very important to know many of these tips for people like me who tend to try to DIY everything.

[@creationholic101]

Glad it was helpful!

[@albertyip6363]

Great ideas and skills! Wonderful. I do not think I have the courage and skill to do repairs like you do, but still I enjoy watching!

[@luc1ferblack]

what are you ten? it doesnt take courage or skill to use a soldering iron on plastic

[@creationholic101]

Thank you very much!

[@zajdlos4652]

Great stuff man👍👍 What super glue do you use? I used many in my projects and none of them seems to be as good as yours😂

[@creationholic101]

cyanoacrylate adhesive glue

[@zajdlos4652]

@@creationholic101 Thank you.

[@Z-MoNeY63]

Making essentially an epoxy or plastic adhesive using ACETONE to break down the polystyrene (cd case) was one of the best things I've ever learned. Being able to make your own epoxy/adhesive for plastics is just freaking awesome. 2 questions though... How strong is the hold? I am not using it for any life critical objects but still want to know if itll hold/bond for a good period of time or is this just like a band aid fix? How long does the mixture stay as a grl before hardening?

[@VondaInWonderland]

These were all very useful tips. Thank you for your time ❤

[@creationholic101]

Glad it was helpful!

[@sirleimoreira9393]

Maravilhoso, ótimas ideias com resultados satisfatórios.

[@kemalpinar3405]

Ip uçları süper

[@creationholic101]

Hello! I am very happy to read your comment. Have a good day!

[@user-oe7sk1dh2g]

Вы открыли мне глаза и дали знания! Спасибо Вам огромное...

[@creationholic101]

Glad you like them!

[@KingLong-ev4bo]

Juda yaxshi. Omad tilaymiz. Tashkent Uzbekistan

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@Turco949]

His secret was the awesome background music to cure all the repairs!

[@creationholic101]

Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!

[@T_bone]

Adding reinforcement is necessary as when melting the plastic for repairs, the carbon content increases making the repair area more brittle. Spot heating the area with concentrated heat VERY careful to not deform the piece and then so the repair can help, but is not always feasible.

[@creationholic101]

Thank you for sharing your feedback . Have a good day!

[@AroundTavush]

I am from Armenia🇦🇲

[@creationholic101]

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

[@ebrahimi_shahin]

It was very informative, creative and practical, thank you ❤

[@creationholic101]

Glad you like them!

[@KhalRashid]

Absolutely great ideas for repairing plastics, especially when parts are hard to get. You for sharing this wonderful video 🙏🏾

[@creationholic101]

Thanks for visiting

[@sgt_s4und3r54]

I'm gonna say this, almost all of these are a "If you have no alternative". Number 10 especially can be done with that same piece they cut and pair of couplers. No need to spend time with super glue or cutting the pipe into pieces. In most cases when you use heat to melt plastic you are almost always guaranteed to make it weaker or more brittle. These techniques can work in applications where there will be no stress on said items for long durations.

[@gladispenalver3278]

Ay South América we are so poor that need this kind of "Works". Believe me.

[@sgt_s4und3r54]

@@gladispenalver3278 I do understand. Especially when parts aren't available.

[@agranov5081]

КЛАСС... Как всегда здорово, очередной лайк.

[@creationholic101]

Thank you! Cheers!

[@peoplesconscience]

Baking soda + charcoal = resin plastic

[@creationholic101]

That’s an interesting mix! Have you tried it yourself?

[@rikunevalainen8154]

Using "antenna cable" was brilliant idea !

[@creationholic101]

Thank you! I’m glad you found the idea useful.

[@hrvojebartulovic7870]

Is that 60W soldering iron? 100W? More? Less?

[@SuryaKencana-ae6ek]

👍 Ya benar sekali, itu soldering iron dengan watt tinggi, sekitar 60 W, 80W atau 100 W, untuk mendapatkan panas yang cukup agar hasilnya bagus untuk melelehkan plastik.

[@SuryaKencana-ae6ek]

Ini Tutorial yang Inspiratif, kreatif, bagus, jelas dan tepat, Mode hemat dana untuk mereparasi barang2 dari plastik yang Kita punya, Saya dari kota Madiun Jawa Timur, Terimakasih atas Tutorial yang sangat Inspiratif ini, Salam Sehat dan Selamat Berkarya Berguna bagi sesama.

[@creationholic101]

60W

[@professorg8383]

Better than most. Superglue based repairs are marginal at best. It does not truly bond. It's easy, but not really that good. Low strength. Most of the thermal repairs are good but using wire ties as filler is most often going to be the wrong type plastic use the parent material scrap and shavings instead, That will be compatible, other materials may not be. Better to get a real adjustable plastic welder. Thermal is almost always best to retain strength and it can be reinforced, Solvent based repair using acetone may be ok, buy solvent based glues are usually better

[@creationholic101]

Thank you for sharing your feedback . Have a good day!

[@Avengedsevenfoldrocks]

Probably should put a disclaimer when you're melting the plastic and the fumes are coming off to at least wear a respirator. I've been painting for 25 years so I know about these things 😢

[@ekfjlsrl]

Yes, I agree to you. Smoke is very harmful to us

[@oglaflores9630]

Exelente aportacion.

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@user-kx1sq9zr5t]

Hello ! Greetings from Varna,Bulgaria. Thank you very much . I can't stop to watching again and again .

[@creationholic101]

Hello! I am very happy to read your comment. Have a good day!

[@sharit7970]

Dang. All the stuff I threw out and replaced when I didn't need to. Genious! Thanks for posting!

[@creationholic101]

Glad you like them!

[@SwapPartLLC]

I weld plastic all the time. The #1 tip I have is to use the same type of plastic as your filler. Different types of plastic expand and contract differently with temperature changes. So, mixing different types of will result in a repair which may not last.

[@creationholic101]

Thank you for sharing your feedback

[@abdul-shakoorhendrickse9063]

Hi from South Africa🇿🇦 ,thanks for all of the ideas i can really make use of each one of the. Simply genius👌

[@creationholic101]

Thanks so much! 😊

[@UZYLI]

Türkiye den izliyorum. Çok güzel pratik onarım bilgileri.

[@creationholic101]

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

[@sparky7915]

Excellent tips and tricks! I learned some new tricks! Instead of staples I suppose you could use small washers. Also, making your own wire staple from wrapping a wire around a screw is brilliant! Taking a piece of copper tubing and then making it fit into the soldering tool and then being able to push a cable tie through is brilliant! WOW!

[@creationholic101]

I'm glad you enjoyed this project! Feel free to connect with other viewers in the comments section and share your results. It's always inspiring to see what everyone creates

[@dante56varias]

Im from the Phillippines...thanks a lot for this tips on repairng plastics..Very helpful..

[@creationholic101]

Thanks for watching!

[@marcialhumbertorosalchoxom4956]

De Xelaju Guatemala . Te felicito eres un genio y gracias por enseñarnos. Eres nuestro maestro .

[@creationholic101]

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

[@andreypetrov79]

Thank you very much! You are a genius! I just saved several hundred euros by fixing problems in my car...Thanks to your video!!!

[@creationholic101]

Glad it helped!

[@jeannetterivera4268]

Usted es un genio. Gracias por compartir sus conocimientos, me han servido mucho y ya no tengo que botar las cosas que aún pueden servir. Un abrazo desde Colombia

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@eidhemeid4317]

كلمة واحدة عمل رائع

[@ionpopescu7320]

Using coaxial cable shield is brilliant!

[@creationholic101]

Thank you! Cheers!

[@mahendranr1317]

Greetings from India very useful tips. Will save a lot by repairing broken plastic parts in my car

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@saucedoroberto1]

Thanks for sharing your amazing techniques, they are great.

[@creationholic101]

Glad you like them!

[@angelcosmegomezserna1952]

Gracias genio por compartir sus conocimientos de restauraciones en todo tipo de plástico bendiciones 🙏🙏🙏

[@creationholic101]

Thank you! Cheers!

[@patrick.b.5603]

Provengo dalla Svizzera Italiana, Grazie per i consigli condivisi per aggiustare la plastica.

[@creationholic101]

Grazie a te per aver guardato! Sono felice che i consigli ti siano stati utili!

[@yuranigomez7981]

Le habló desde Bogotá Colombia me parecen interesantes sus trucos para arreglar cosas de pastico

[@davidgarciamenda]

Desde Madrid, te mando todos mis respetos. Geniales las soluciones.

[@dgb5820]

This is one of the most interesting and clever videos on KZbin

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@Ryonisss]

Thank you for your help and free education. Your ❤ is Big... 😊

[@creationholic101]

So nice of you

[@danieleleiva]

From Argentine. Thank you a lot. Very usefull video.

[@creationholic101]

Glad it was helpful!

[@vilmafonseca3937]

Eu achei todas hoper interessantes. ❤ Obrigada. De Portugal.

[@1Klus]

Biggest lesson for me here is that super glue never works alone. It will work with your fingers if nothing else😂

[@creationholic101]

Thank you for watching

[@E-hab]

That's what I say always it won't stick on anything but your fingers

[@axfu61]

Das mit dem Zahnrad ist fantastisch. Alle Achtung! 😮

[@creationholic101]

Thank you for watching

[@SandroRufino]

Boa Noite, sou aqui de Maceió Alagoas Brasil 🇧🇷 e gosto muito dessas ideias e dicas de reparo em plástico. Obrigado @Sandro Rufino. 👏👏🙏

[@creationholic101]

Olá! Estou feliz que você tenha gostado dessa ideia. Desejo a você todas as coisas boas!

[@DragonUlises]

Muy bien. Felicitación y gracias por regalar conocimientos. Desde BOGOTA, Colombia.

[@creationholic101]

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

[@mlslourdes1]

Sou de Belo Horizonte, Minas Gerais. Gostei imensamente dos seus vídeos e da sua criatividade e habilidade. Você deve ser também um ótimo escultor de peças de arte.. Parabéns. Precisamos de pessoas como você divulgando informações úteis.

[@creationholic101]

Muito obrigado pelo carinho e pelas palavras gentis! Fico muito feliz que os vídeos tenham sido úteis para você.

[@shahramafshar4710]

I am from Iran and I learned many things from you, thank you for this creativity

[@creationholic101]

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

[@peterk2279]

天才ですね。家の物を修理する機会が結構ありますが、樹脂系は諦めていました。参考にさせて頂きます。

[@creationholic101]

ありがとうございます！役立つ情報を提供できてうれしいです。参考にしていただけると幸いです。

[@劉英俊-s8q]

…..人才啊..！實在佩服…是真心的！ 原本是想一邊吃早飯一邊看您的視頻，飯ㄧ上手後便用右手用筷子🥢挾了一片鹹豬肉放入碗中，正想配著飯吃第一口…就一直維持同一姿勢一直到您的視頻結束..！ 這視頻對我的幫助很大，謝謝您願意分享出這視頻 感恩..！

[@creationholic101]

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day! 你好！歡迎來到創造狂人頻道。我很高興讀到你的評論。祝你有美好的一天！

[@carloscebrerotamayo3893]

Realmente impresionante.....la forma adecuada para reparar todo tipo de artefactos domésticos que de una u otra forma se caen o se dañan por su uso diario... diferentes materiales y métodos de reparación según su daño . "Felicitaciones " de mi país Chile. Gracias

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@johnwagner8465]

Thank you for all the awesome tips

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@edilsongrande2975]

Surpreso com tanto talento pra recuperar coisas que no meu caso não acharia recurso ,Parabéns pelo aprendizado , simplesmente excelente 👏👏👏

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@fjac3807]

Hello. I´m from Madrid, Spain. You are a machine of plastic.... Thank you very much.

[@creationholic101]

Thanks for watching!

[@abbadiefouad6930]

Hello. From Algeria, the north of africa.

[@creationholic101]

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best