Top 40 BEST 3D Prints of the MONTH with Satisfying Timelapse

On this video we compilated a Top 40 BEST 3D Prints with all videos of DECEMBER and Satisfying Timelapses.
Contact for partnerships:
✉️ [e-mail]
#3dprinting #timelapse #compilation

[@mrkennedy3d]

All files used in this video: Toilet Roll Sisyphus by SerenityRanch: www.thingiverse.com/thing:6287835 Mini Bic Lighter Case inspired by a popular toy brick by DevonRogers: www.thingiverse.com/thing:6287082 Knurled Twist Container with larger inner space by SEA17: www.thingiverse.com/thing:4366929 Parametric Card Box by Roguenorm: www.thingiverse.com/thing:3072760 Q-Tip Swab Dispenser by RockyMtnMark: www.thingiverse.com/thing:4876487 Tire Pen Holder by caseys_graphics: www.thingiverse.com/thing:6301248 USB Cable Reel by manabun: www.thingiverse.com/thing:2856991 3x and 4x AA Battery Case (Box) Eneloop by k-eye: www.thingiverse.com/thing:4073130 Shot dispenser by Littleroot3d on Thingiverse: www.thingiverse.com/thing:4540111 Happy New Year 2024 by FiveNights on Thingiverse: www.thingiverse.com/thing:6309208 Beer Tray by Atelier Vcube: www.myminifactory.com/object/3d-print-food-platform-for-beer-89860 Bottle Ant Roll by WDonders: www.printables.com/model/266438-bottle-anti-roll-stops-interconnectable Circular Beer Bottle Carrier: www.printables.com/model/6266-circular-beer-bottle-carrier Smart One Handed Bottle Opener by Kart5a: www.thingiverse.com/thing:269463 Holiday Party Cocktail Stirrers - Swizzle Sticks by barb_3dprintny on Thingiverse: www.thingiverse.com/thing:4021766 Beer Bottle Lock by benjaminedwardmorgan on Thingiverse: www.thingiverse.com/thing:628847 Your Little Christmas Tree by FloppyFist on Thingiverse: www.thingiverse.com/thing:4669619 Merry Christmas decoration by jsovey on Thingiverse: www.thingiverse.com/thing:5187254 Santa Claus supportless by TJ78 on Thingiverse: www.thingiverse.com/thing:3921816 Snowman by tcrdesigns on Thingiverse: www.thingiverse.com/thing:1919587 Gnome ( Supportless ) by BODY-3D on Thingiverse: www.thingiverse.com/thing:5720442 Cookie cutter: www.thingiverse.com/thing:3194573 Laying Christmas Deer by yeg3d on Thingiverse: www.thingiverse.com/thing:1203313 Chubby T-Rex Dino Pencil Holder / Pot / Container by IK3D on Thingiverse: www.thingiverse.com/thing:5927848 Scorpionz... with Rotating Tail and Pincers that Nip! by muzz64 on Thingiverse: www.thingiverse.com/thing:1001286 ANYCUBIC FLEXI PRINT-IN-PLACE ALIEN by FLEXIFACTORY : cults3d.com/en/3d-model/art/anycubic-flexi-print-in-place-alien Working Cannon by makkuro on Thingiverse: www.thingiverse.com/thing:5421331 PS4 Dualshock 4 Controller Holder by Metzhara on Thingiverse: www.thingiverse.com/thing:3082825 Succulent Planter / 3D printed planter / Legged Planter by p4zR on Thingiverse: www.thingiverse.com/thing:2677108 FLEXI TORTUGA by Krear3D on Thingiverse: www.thingiverse.com/thing:6312626 Flying Night Dragon by Sevro : www.printables.com/model/404447-flying-night-dragon Binge Watcher's Popcorn Bowl by ecoiras on Thingiverse: www.thingiverse.com/thing:4586463 Ghost Pacman Planter by Chaolinx on Thingiverse: www.thingiverse.com/thing:1957674 Hand Can Holder by ryan5sampson on Thingiverse: www.thingiverse.com/thing:6315041 Karate Phone Stand (More angled) by Littlefiver on Thingiverse: www.thingiverse.com/thing:4722236 Big StrawGlass - Practical by bLITzJoN on Thingiverse: www.thingiverse.com/thing:1483266 Parametric Squashed Mouse Door Stop Wedge by iamburny on Thingiverse: www.thingiverse.com/thing:418207 The Rocktopus (The Rock + Flexi Octopus) by DanielCazar on Thingiverse: www.thingiverse.com/thing:5151852 Cookie cutter: www.thingiverse.com/thing:3194573

[@rexgoodheart3471]

Thank you! For that you get a subscribe. :)

[@user-ow6du2kf2v]

The rock toothpaste is so cursed💀. Great video, this is what I love to see on KZbin.

[@mrkennedy3d]

It's a humor, let's say... specific hahaha 😂😂 Thank you!! We are happy to read this 🙏🏻

[@marce290280]

Please put the link of the models, that helps the channel

[@mrkennedy3d]

Hey! We pin the links in the comments, have a nice day 😁🙏

[@mr.d2869]

Do you have retraction enabled in your slicer, and if so, what settings are you using? Adjusting this could help with the stringing seen on some of your prints. Also, i think using a skirt instead of the brim looked better on the Merry Christmas peice, personally I always use a skirt instead of a brim unless I'm having issues with bed adhesion. Noticed the bottom edge of the "C" peeled up a bit on the Merry Christmas, but still thought it looked better than it would have if you had used a brim. Cheers and Happy New Year!

[@mrkennedy3d]

Yes, we leave a retraction of 6 mm with an average speed of 35mm/s, normally the strings happen due to the timelapse clean, as the hotend needs to return to the corner of the printer in each layer and this ends up resulting in some strings... And regarding brim, we use it very frequently because almost all of our filaments are ABS and our printer is open, sometimes it is a real challenge to make the piece stick without it, even on pieces with a lot of contact area 😅 Thanks for the comment and tips, happy new year to you too 🖤🎉

[@lolzlarkin3059]

This is amazing! ...a stock ender 3! :o

[@mrkennedy3d]

Thank you!! 🩵🙏🏻

[@muthukaalai4363]

Bro I want to start 3s printing business to make gifts and Home decor items and toys Which machine is suitable for it . Please guide me sir....

[@mrkennedy3d]

Hey man! Unfortunately I'm not the best person to guide you on this matter, but I can share our experience! We had an Ender 3, it's an entry-level model and quite manual, it's a good printer for beginners but I don't know if it would be the best for producing items in quantity to sell, now we have a Neptune 4, super fast! It was a great decision to buy it, so far we haven't had any problems... But I recommend that you do a good KZbin video marathon with printer reviews and write down the pros and cons, who knows, you might even like resin printers! I've never had one but I know that the finish of the prints on it are prettier... Anyway, sorry I can't help much more than that hahaha 🙌🏻

[@muthukaalai4363]

@@mrkennedy3d thank you for your reply bro........

[@muthukaalai4363]

Bro..which 3d printer is used to make this products

[@mrkennedy3d]

We use a Ender 3 V2, a Elegoo NEPTUNE 4 PRO and a Beagle Cam V2 for the timelapses, the links are in the description of this video 😁🙌🏻

[@muthukaalai4363]

@@mrkennedy3d very much thank you for your reply bro ...

[@jeffreytackett3922]

Just once I'd like to watch one of these videos and it not be a bunch of toys.

[@mrkennedy3d]

Hey Jeffrey! We usually make these prints aimed at entertainment, but the 3D universe really has infinite possibilities, thanks for the suggestion the feedbacks are very important for us, have a nice day 🙏🏻😊

[@rodrigomp517]

like pelo guaraná

[@mrkennedy3d]

quem sabe sabe kkkkkkk

[@orozcocris93]

put a warning on things that are meant for food or drinks, your standard pla printed on standard printers is not food safe. you would need special coatings and pla designed to be food safe to use those things as food holders and such

[@mrkennedy3d]

As we make the video for entertainment only, we do not use prints involving food after recording, but we would appreciate the advice to put a warning in the future! Thank you for the comment 🙏🏻

[@jdpantoja442]

Respectable job but can't find the link to models...

[@mrkennedy3d]

Hey! We pin the links in the comments, have a nice day 😁🙏

[@jdpantoja442]

@@mrkennedy3d Thank you!

[@mrkennedy3d]

@@jdpantoja442 you welcome 🖤

[@The_Privateer]

Please link STLs

[@mrkennedy3d]

Hey! We pin the links in the comments, have a nice day 😁🙏

[@ozdevil4564]

not the beer bootle lock

[@mrkennedy3d]

😁🙌🏻

[@0xdreadnaught]

Please do not make that cup with an FDM printer. The filament you use may be food safe, things made via FDM are not. OP should have included a disclaimer or just left it out.

[@mrkennedy3d]

This time we just made the video, but thanks for the tip 🙏🏻 Have a good day!

[@carolmatt2959]

Why add brims to all these models? Waste of time and filament, for sure.

[@X-JAKA7]

The brims are also hard to take off as well, and it tore off my nail once.

[@mrkennedy3d]

Hey! Here in our country, filaments are not very affordable, as we do a lot of prints we tend to use ABS and our printer is open, the ideal is to create a structure around it to prevent air circulation, but for now using brim helps to fix on the table without it coming off 😊

[@altergermane9556]

Das Video wird unnötig in die Länge gezogen. Zigmal in der Hand hin und her gezeigt. Einmal reicht !

[@mrkennedy3d]

Thank you for the suggestion, have a great day 🙏🏻