TOP 5 FLOW CONTROL & PRESSURE PROFILE RECIPES

Flow Profile Recipes for the Lelit Bianca, Flair, Decent and other Espresso Machines.
► Third Wave water: thirdwavewater.com?sca_ref=1831454.vJoUySSRR3
► Become a Patreon: / kylerowsell
► Lelit Bianca: geni.us/hrZu5B
Subscribe & Like for more Videos like this.
Find me on Instagram: kyle.rowsell?ig...
Tik Tok: vm.tiktok.com/ZMLenRk47/
-- FEATURED LINKS --
🛒 My Coffee Bar Setup: kit.co/Kyle.Rowsell/my-coffee...
► Subscribe to 𝙎𝙩𝙖𝙣𝙙𝙖𝙧𝙩: www.Standartmag.com/Kyle
☕️ Coffee Gear I personally Use: kit.co/Kyle.Rowsell/my-coffee...
📷 CAMERA Gear: kit.co/Kyle.Rowsell/camera-gear
THIRD WAVE WATER: thirdwavewater.com/discount/K...
𝙇𝙞𝙣𝙠𝙨:
► Aeropress: geni.us/LKQ0P
► Kalita Wave: geni.us/8R8e
► Origami: geni.us/yeHtZHC
► V60: geni.us/3faIhf5
► Chemex: geni.us/CRQN
► Fellow Stagg X: geni.us/ZkO4A
OTHER LINKS
► MERCH: kylerowsell.com/collections/all
► Email: [e-mail]
(Some but not all of the links above are affiliate links and provide me a small commission at no extra expense to you)
Timecode:

[@KyleRowsell]

To take this one step further be sure to download the Smart Espresso Profiler app to track and log your profiles. It’s an intuitive app that connects with your smart scale to graph your espresso profiles.

[@brandonrohrer2245]

I wish it had the capability to download profiles from a community

[@adammacfarland6415]

Do you have the profiles on a website or PDF somewhere for quick reference? Preferably in grams per second.

[@True60RS]

What smart scale do you recommend for viewers?

[@matveip3727]

Thanks for the suggestions, indeed curious with the suggested app, do you have scales review that could work? With the Lelit v3, I assume the pressure is not Bluetooth? Did you modified yours to get the pressure information?

[@rafitorres15]

The Acaia Lunar is a widely used smart scale in the prosumer community, is not cheap though…

[@CristianStancu]

00:00-Intro 01:32-1.Londinium Profile 02:02-2.Blooming Espresso 03:29-3.Declining Profile 04:42-TWW Sponsor 05:57-4.Slayer Profile 07:26-5.Espresso Allongé Usefull video, thank you. A cheat sheet will all of these would also be nice.

[@tjt6966]

Thanks Kyle... this is exactly the sort of video I was looking for... been wanting to play around with flow profiles and bam, here is the perfect video for it... The way you explain it and present is makes it very easy to understand... thanks again.

[@KyleRowsell]

Ah that made me SMILE! Thank you for the kind comment! This channel is all about helping with approachability to specialty coffee - so I’ll consider this a win ✅

[@OuchyEs]

Kyle I've not sure what you've changed but I thought this was your best video yet! Super helpful and concise! Looking forward to trying some of these profiles on my Breville Dual Boiler!

[@darwinngo]

As someone with a Lelit Bianca, this is the video I've been waiting 2+ years for! Can't wait to try these out tomorrow.

[@KyleRowsell]

Enjoy!

[@Penskeeee]

Finally. A good flow profiling video from one of my favourite coffee content creators. Great stuff! Do share more in the future!

[@KyleRowsell]

Ah you’re too kind!

[@SantiagogranadosR]

Thank you!!! It’s a pleasure someone explaining this in a easy way! Decent videos are great, but this one kind of gives you an easy point to start from. Thank you!

[@KyleRowsell]

Glad you feel this way! Enjoy!

[@adammacfarland6415]

I love this one. Thanks for sharing. I’ll be trying them all out. I also like the spring lever profile. For that I use about 6g/s flow for 3 seconds, stop flow for 5 seconds, about 7.5g/s until full pressure is reached and smoothly decline flow until I hit the output I want. Usually end at a rate of about 5-5.5g/s and a total shot time between 30 and 35 seconds.

[@muhammadsyaakirin1781]

Thanks Kyle! Tried the declining profile, It really does good thing to the espresso. I get better balance with the medium roast beans. Bring up the acidity to which it become more balance. Keep posting flow profiling in the future, I just owned the lelit bianca for about a month now. Still learning and getting use to the flow profile features. Thumbs up for the video! 👍 Really helpful! Again, Thank you very much!

[@KyleRowsell]

So glad to hear this!

[@nat2world]

awesome i’ve been wondering about all of these recipes, so this is great. especially because there’s already been videos on the sprover and turbo shot, so these are nice complements. i’ll see what i can do with my flair pro2! big thanks!!

[@KyleRowsell]

My pleasure! Enjoy

[@bendallas5639]

Great video Kyle. Just what I've been looking for, with my profitec pro 600 with flow control. Thanks a lot

[@edipisreks5535]

The Londinium is my standard profile with my Flair 58. I find it works great with the primarily quite lightly roasted coffee I almost always drink, and I find it to be fairly (flairly?) easy on the 58; anybody who has used a non-spring lever machines knows that keeping the pressure steady can take practice (you get an instantaneous drop in pressure if you release force on the lever, as Kyle mentions), and this one is pretty easy to modulate if you have the grind right.

[@KyleRowsell]

Great comment! Thanks for watching

[@kaneticpt]

Great video. I have a La Pavoni lever machine and these tips on profiling have improved my brew results more than anything else I’ve tried. 🙏

[@KyleRowsell]

Love this!

[@viavelum]

Thanks Kyle for those recipes!

[@davidrogala7597]

Londinium apparently is one I like a lot. Blooming profile is intriguing too. Thanks for putting up extra info on the screen. Thank you! 👊

[@christiankozma454]

Been looking forward to this since your first Bianca video. Thanks Kyle!

[@KyleRowsell]

Enjoy!

[@MrTwins95]

definitely a video ill have to come back to! I currently have a gaggia classic pro but have a HX machine with flow profiling being delivered tomorrow. Cant wait to experiment with it!

[@cal616]

What an amazing informative video! Make it so clear for learning! 🙏 thanks Kyle! Keep up the great work 👍

[@Mestreech1995]

Hi Kyle, thanks for the great video. I've had my Bianca for a few days now and with your explanation it will be even more fun to play with profiling on the Bianca. For me you can make even more videos with profiling.

[@BenJoelLush]

Much appreciated! Looking forward to your coffee table magazine :D

[@KyleRowsell]

Thanks for watching!

[@thedudewithpedal]

Great video! Just in time as my lelit bianca v3 arrived too. I guess I need to switch off all the preinfusion timer, low pressure start and end on the feature. Thanks man!

[@Richard-uh8oq]

A recipe I tried was turn on for 3seconds then turn off for 23 seconds then turn on until I get 45 grams of espresso from 18 grams of beans from a medium roast with a good result, will definitely try some of your recommendations ,keep up the good work .

[@digitalazia]

Excellent, thanks for sharing the knowledge... Keep posting more profiles as am experimenting at the moment and this is pretty useful as a starting point.

[@KyleRowsell]

Glad to hear it

[@TheBaristaGame]

Great video, Kyle! 👍🏼

[@KyleRowsell]

Thanks!

[@sahand5938]

Have been waiting for this one!! Just got my Lelit Bianca yesterday and first thing I did was make an Allongé (which I like saying because it makes me feel fancy).

[@KyleRowsell]

Right on! Enjoy!

[@clovala]

Thanks for the profiles. I’m especially looking forward to trying a couple of these on Four Barrel’s Friendo Blendo for that sweet fruity goodness.

[@KyleRowsell]

My pleasure! Amazing! Please share how they turn out!

[@iamjerney]

Great video Kyle

[@KyleRowsell]

Thanks friend!

[@ozpain1]

Just tried third wave water and it really does add something pretty great to my espresso! Fought the urge for a good while and am happy to have finally tried it. Was using water from just my pure filter, but now I’ll probably keep a steady supply of TWW espresso on hand. Thanks Kyle.

[@KyleRowsell]

Glad to hear it!

[@carsiotto]

I love this vid, great job!

[@KyleRowsell]

Thanks!

[@ilphantaztiko]

This video was just what i needed. Thanks! Hopefully the recepices work well with my Crem One $.

[@ersatemek9052]

Great content Kyle!

[@KyleRowsell]

Thanks!

[@sherkhanmy]

finally, seen a reason for me to get a bianca!

[@miccocruz]

I loved this! You normally have a friendly vibe, but this felt extra friendly and approachable despite the complex concepts. Maybe it's the camera angle, the staging, or something else. Either way, great vid!

[@KyleRowsell]

Glad to hear it 😃

[@nobitataweel7848]

Great video as usual. I wish extractions times where included or mentioned.

[@nemilperez5441]

Just tried the blooming espresso on my flair, it was so smooth! Much more balanced flavor overall, less fermented taste which is missed but still present

[@Sunlives]

Are you kidding me?! I spent a week trying to figure out my new GS3 with mixed results. And yes, it was a bit frustrating. Then you come along with this video and I pull 3 Londinium shots with 3 different beans with great results one after another. Mot*erf*c*ing YAY ;) to that.

[@KyleRowsell]

Ey! Love that! Glad to help!

[@caffeinated_slacker]

Great video Kyle. I have a Londinium and an E61 with flow control. I think a better emulation of the Londinium profile is to follow the first two steps as you described (pre-infusion until first drip, then 9 bar) and then immediately go to a declining pressure for the remainder of the shot, rather than holding at 9 bar and dropping to 6. Immediately declining after hitting peak pressure is what the Londinium spring lever naturally does.

[@KyleRowsell]

Another great way to emulate the londinium! I chose this recipe to share for simplicity. Thanks for the comment!

[@caffeinated_slacker]

@@KyleRowsell Thanks for the reply. As an interesting aside, my efforts to emulate a Londinium with flow control never really capture the results from the lever. There’s been discussion on this topic on the Decent forums, and a variety of theories for why this is true, I think the water debit theory has the most merit. Lever machines deliver water faster than pumps. A vibe pump delivers ~8 grams/second, a rotary pump more like 12g/second. But, when you pull a Londinium lever down there’s a torrent of water, ~25g/second from my testing, that near instantly saturates the puck. It would be interesting to see this theory explored.

[@HoratioBannister]

Love this. Thx!!

[@80Entreri]

Very helpful, Kyle! Would love to see some content regarding the variants of turbo, and hear your thoughts about when you would consider this type of shot.

[@KyleRowsell]

I’ll keep this in mind!

[@user-lv7ph7hs7l]

This is helpful preparation. Almost all the parts for my dimmer bypass mod are here. Not as fancy as a Bianca but I think it will be one of the first PID Anna's with this mod. Bypass selects either full voltage on the pump or the dimmer, that's preset to preinfusion pressure, then I can flick the switch and get full pressure or leave it in the dimmer position and use it conventionally for full flow profile. Of course what I'd really want is an ECM Classika PID with pressure profiling kit. I frequently day dream about this machine. An often overlooked beauty in my oppinion. 0.7 L boiler, E61, no HX temp fuss, it's just a single boiler and PID with ECM quality. Also expansion valve to set the brew press under the removable drip tray. Takes 10 s tobset it to say, 6 bar for turbo shot. 20 s to go between steam and brew. I think if you don't absolutely must steam and pull at the same time it's gonna eat many HX alive in temperature stability and predictability for half the price. Or 1/3 that of a dual boiler that also gets amazing temp stability of course.

[@KyleRowsell]

Glad this helped! Seems like you’ve got it all figured out regarding your future! Have fun!

[@gregorio5543]

Kyle! This video is incredible. Ive been waiting for a long time for a video like this. There are so many on a decent but not on a flow profiling machine like the Bianca. Im getting one later this year (hoping with a P64, if its not availiable). On the Bianca, how do you know which ml/s is being pulled at a given time?

[@audriusa7005]

Thank you for excellent video!

[@KyleRowsell]

Thx for watching!

[@AlexZapata-]

I always pull Londinium shots and they are my absolute favorite! I used to always pull Blooming espresso shots and they were also amazing! (On Flair 58) Blooming espresso shots pulls it’s best shots on the Flair pro 2.

[@KyleRowsell]

Right on! Glad you enjoy them! Why did you find them better on flair pro2?

[@AlexZapata-]

@@KyleRowsell I probably should’ve worded that better but what I meant to say was I believe that the blooming espresso shots are the best shots the Flair pro 2 produces!

[@KyleRowsell]

@@AlexZapata- gotcha! I do love a blooming espresso.

[@greysuit17]

I do an allongé on my Rok espresso….it is pretty modded though, I’m not sure you could do it stock. Love the allongé! Great video!

[@jf1675]

Kyle thank you so much for this video! So this all about yield and not timing correct?

[@CrazyCalabrese78]

Great video. Have tried a couple of these already on my Robot but need to try them all. Had a hard time dialling in some beans recently because I kept getting a lot of astringency anywhere beyond a 1:2 yield. Now I know that’s the limit, which one would you recommend to bring out some sweetness? It’s a blend with half Yirgacheffe and half Brazilian something…lol The Londinium brews a decent shot with these beans but I may try the declining profile next and then the Slayer. Also, for something like the Robot where you boil water then fill the portafilter, will those mineral packets work?

[@HaekalAlchatieb]

very interesting technique

[@oliviera6780]

Thanks for the video Kyle!!! I have the same setup as you and just started playing with the multi purpose burrs with the p64. Any tips or profile recommendations for unimodal burrs?!

[@edip2590]

Very very interesting video Kyle 👏. I have a Slayer Lp machine and I'm going to use medium roasted and sometime light roasting coffees and my question is ; what would be your most important advice ? thanks 🙏

[@florianguigui1302]

Great and concise ! Would it be possible to make a nice small downloadable poster with those 5 recipes ?

[@ThunderRunner]

Hey Kyle! I think you covered it between the Londinium and declining, but a traditional spring lever profile would just be slightly different. Wondering if you’ve ever been able to use one or considered over your Bianca? Kind of stuck between the manual control of the Bianca and the auto lever profile of a spring lever machine at the moment. Great video!

[@GeroLubovnik]

Great video... On your Bianca, how many mL/sec does your machine give when the paddle is fully open? Secondly, the Lelit FCD only allows roughly 180° of rotation where the FCD itself can rotate 540° (1.5 full turns). Do you find the paddle as a limiting element? If not, why? Thanks in advance for your answers.

[@borjalpze]

Hi Kyle! Such a great video! It would be a great addition to this explaining how you set up and calculate flow rates on your machine, it can help others like me (I also have a Bianca) or even people with others machins since the process should be quite similar. Cheers!

[@KyleRowsell]

I’ll be sharing How to measure flow rate in an upcoming Bianca review! Thanks for watching!

[@michaelcibula9552]

@@KyleRowsell Was the flow rate supposed to be in your 2yr review that you just posted? I don’t recall seeing it. or is there another one coming?

[@mattodrums]

Do you ever use the automatic preinfusion timers within the Bianca? Do you recommend bringing down the pressure from 10 bar to 9? Great videos, thank you!

[@paryzfilip]

My favourite espresso profile is... Whatever my cafe does, works everytime 😅 Amazingly sweet espressos.

[@KyleRowsell]

Ha fair enough!

[@ali4ek]

Thank you, an amazing video. One question - how do you set your preinfusion settings? Off and purely control the pressure by the paddle? Or On (start 3 sec, stop 8 sec?) and apply all the above, e.g. for Londinium let preinfusion run as set (start 3 sec, stop 8 sec), but you control the pressure with the paddle at the same time, in parallel, i.e. 3 bars until the first drops in the cup, then open to 9 bars, then taper to 6 bars?

[@omarpixel9176]

You should definitely play around with turbo shots if you haven't already. And if you had then I'd love to see a video on that soon too!

[@KyleRowsell]

Oh I have! More on it in the future

[@StephenProsserHCC]

Profiling app is clutch for not DE1 machines. Cool to see

[@daq1882]

Hi, great video, very helpful. Any idea of the flow rate of your Bianca (full tight and full left ?) Thanks.

[@rand9176]

Great video mate. Question for you - what burrs are you running on your p-64? I've got one on order with unimodal burrs, which they recommend for those who want to get the best out of light roasts (which is what I am interested in) - however, in their FAQ, they call out flow profiling as something that may make this burr set not an optimal choice (in combination with other things like VST baskets, light roasted coffees etc). It has me wondering if going for high uniformity and pursuing flow profiling is the go or simply going with the unimodal burrs and those quick extractions/turbo shots... Keen to know your thoughts. Cheers.

[@michaelcibula9552]

Just watched your 2yr review and posted a comment of how I think the Bianca paddle is more intuitive than the flow control knob on my ECM. Watching you do these profiles just now I’m doubling down on that statement :). I find flow profiling on my Synch a bit more challenging. Wish they offered a kit that’s more similar to the Bianca.

[@KyleRowsell]

I agree with you. But I’m also not trying to start a tribal war ha.

[@michaelcibula9552]

@@KyleRowsell haha. Of course not, and me neither :)

[@BenBaranovsky]

Hey Kyle, thanks for the great video! It looks like you set your pump pressure to 9 bars, is that correct? Or is it closer to 10?

[@robertmessler800]

Thanks so much Kyle. Are the shots based on yield of 36g in about 30 seconds?

[@Ohboyohboyohboy]

Hi Kyle, what would be the recommended brew time range for let’s say londinium and blooming espresso recipe? I brew various type of coffee of different roast level. (Light to medium) When I fix a grind size to start, each coffee can produce a wildly different flow rate. I’m confused of what variable to pivot on to guide me. Normally, when using a machine with no pressure profiler, I keep my brew time (from machine on to off) within 20-30 seconds in which the total yield is reached. Then I’d adjust other variables such as dose, yield, temperature based on how the espresso tastes, its tds and EY%. Now with pressure profiled recipesx, that 20-30 seconds time doesn’t make sense anymore.

[@q8ihassan]

Hello Kyle, is there any recommendations on the extraction time? Thanks 🙏

[@darkim1777]

Hey kyle have you ever heard of layering shots with different beans? So the video i saw layers 3 different coffee beans on his puck before brewing it as an espresso. His tip is starting from the beans easier to extract to harder to extract. Dont know what makes it different from the blends though.

[@cameronbatko]

My major problem with espresso is after drinking it is , darn I wish I could drink more of these without being over caffeinated. Favorite is declining pressure 1:2.5 20g/50g 8 bar to 6 bar over the shot on my robot. Also like to do a spro over on the nomad too.

[@KyleRowsell]

Amazing! Thanks for sharing Cameron!

[@phillipphan1394]

Great video. thank. Strangely, my Bianca reaches 10-11 bar regardless of where my paddle position is. The bar pressure does not go up or down if i turn the paddle 3-6-9 o'clock full open, or in the opposite direction, like yours seems to do. Any clues what's going on with my flow control other than it's not normal? thanks!

[@error404BrainNotFound]

My go to for very floral shots the past few weeks has been a 30-35 second total shot time, 1 bar pre-infusion for 20 seconds and a 3 bar extraction the rest of the shot. 15g in 14g out with a paper filter in the bottom of the portafilter and a puck screen on top

[@KyleRowsell]

Very interesting! Thanks for sharing!

[@error404BrainNotFound]

@@KyleRowsell just followed on patreon!😁thanks again for the great content

[@KyleRowsell]

@@error404BrainNotFound ah you’re too kind.

[@dragonstead]

do the cremina shot! i love emulating a lever shot on my VBM domobar super digital. that's a brand and a machine that doesn't get enough love. you should check it out!

[@CoreProject05]

Hi Kyle, Have you measured your water debit in different paddle locations? All the way open I get 5.65 g/s middle 2.6. Seems within spec of the bianca v3 but curious if this is ok or not

[@molina.unofficial]

Great content Kyle. I’d find it be super useful if you’d mentioned output flow in g/s instead of pressure. Bonus if you know what the water debit in ml/s the paddle is on too. Any idea what your output flow is on these recipes?

[@vecinoscoffeeguy993]

I have a Bianca as well as a DF 64 I am trying to pull an Allonge with 20 grams f Ethiopian natural what number would you use on the DF 64 I tried a coarser espresso setting of 24-25 how many grams out is typical?

[@doshiharsh123]

Where did you got that green espresso cup ! So nice

[@BensCoffeeRants]

Funny I was doing the Londinum profile without knowing it, I usually start slow flow and ramp up slowly then taper off towards the end. But lately I've kinda been doing a fast flow rate at the very start and going low just before pressure builds up since I heard that it's better to have higher flow at first to fill up the empty space quicker (not sure if that actually helps anything though). I might experiment with going back to slow flow start and see how it compares if there's any difference really.

[@KyleRowsell]

Right on! Have fun experimenting Ben! What are you brewing with?

[@BensCoffeeRants]

@@KyleRowsell ECM Synchronika is my main beast, but I also have a La Pavoni Europiccola I've been enjoying recently, and just picked up a Flair classic and added a pressure brew gauge to that. I'm always experimenting :)

[@wilsonkarakire]

Hi Kyle I’m using white eagle one but can change those profiles plz if possible help me I want to try those 🥰

[@karlwilson863]

Another great video, as always Kyle! How easy is it to get good results when using a smaller dose than the basket is designed for? Does a shower screen help? I’m using a Flair 58.

[@KyleRowsell]

It’s still possible to get good results using a dose designed for a specific basket will often yield the best results

[@edipisreks5535]

You’ll want to get a smaller basket. I would avoid adding a second puck screen, probably. I am assuming you are using the newest version which only uses a puck screen for dispersion.

[@tommihommi1]

If you're using a puck screen or a paper filter on top, you can way downdose without issues. I wouldn't go below like 14g in a straight wall 58mm basket, though.

[@phillipphan1394]

Great video. please can you provide a written descriptin of each of the 5 in your video outline text above? thank you!

[@JuliusSP1]

With the slayer can you preinfuse with greater pressure, like can you start it at 3, 4 or 5 bars before switching it you full pressure?

[@michaelcibula9552]

Hey Kyle, do you make those Coffee Over Caffeine hats, etc, that I've seen you wear? I am not seeing anything on your merch link at the moment.

[@sushixp]

Dang P49 is just down the street from me. Will definitely try it out

[@rulshah6064]

Would try the 2nd method

[@KyleRowsell]

Right on!

[@andrewdevall4438]

Which burrs are you using in the p64? I'm still struggling to get the texture I want out of SSP MP using a Slayer modded BDB. Shots are really peaky and sometimes offensively acidic

[@lenso010]

is it normal to get flow speed at low at beginning of shot and it gets speed up during shot. I can not get consistent flow during shot. I use Gaggia classic with 9bar spring .

[@juancampos1826]

Hello there, I'm new at this espresso world, I have one quick question, what do you mean you you say ratios? because coffee is measure in grams and water in ounces maybe. how do you measure your ratios or is it time? thanks

[@Gk2003m]

Good job. What are your temperatures?

[@321Borny]

Blooming: You say that after your 30 sec blooming (pre inufsion) phase you want to ramp up to 9 BAR of pressure until you reach a 1:2 or 1:3 ratio. Do you start measuring that ratio by timing 30 seconds from the moment you start the pre-infusion or do you start measuring that ratio by timing 30 seconds AFTER the bloom (pre infusion)?

[@Lytfh]

Heya! Do you manage to do this recipes with MP burrs or do you have the HU? thanks!

[@KyleRowsell]

Both! But here I’m using the HU

[@Myusernamehere33]

Do you need a flow profiling scale like an acaia to properly create these on something like the flair 58 or can you base it off the meter alone?

[@KyleRowsell]

You don’t need a smart scale! But if you want to use the smart profiler app you will need a capable scale

[@fjaviergl99]

you should consider the Easy Blooming profile. similar to blooming but a big improvement from a fellow DE1 user

[@KyleRowsell]

I’ll check it out

[@blutcherama]

Kyle, can you articulate the difference to "astringency" and "acidity?"

[@gambi321]

Is it possible to get recipes with seconds and pressures? Also do u need to adjust grind settings for each recipe?

[@KyleRowsell]

You do need to adjust grind settings! And some of these don’t need to rely on time as much as they do for flow and taste. But some profiles do have time outlined in the data bubbles that come up on screen as well!

[@adiparekh3163]

Hi kyle & coffee lovers, are these recipes irrelevant of the time it takes to extract the ratio? I’m assuming you can only do this once you’ve had your grind size perfected? Just bought Lelit Bianca. Excited to try out the recipes.

[@dandietetics]

Hey Kyle, where can i get a similar walnut tap you have to control your valve?

[@KyleRowsell]

Lelit dealers often sell these

[@ArthriticAngler]

Any recommendations for drinking a cortado sized Americano? Less acidic

[@KyleRowsell]

Try the blooming espresso!

[@flipu2k]

Great intro to pressure (not flow) profiling, but why no mention of temperature? If you pull a standard shot in 25 seconds at 93C, what temperature will you use if you pull the shot in 50 seconds?

[@KyleRowsell]

Thanks for the comment! Pressure is only derived from flow of water multiplied by resistance. Without flow change there is no pressure control. As for temp - that’s left to play with depending on the coffee and taste desired. The purpose of this video is to simply provide some frameworks to test different profiles… and temp can be adjusted accordingly.

[@teedzay]

What’s the model and brand name of the silver grinder?

[@barjee8965]

Do these profiles have a rough extraction time or is it just arbitrary at this point?

[@eda7875]

All of them other than the last one you dial in to your usual 25 to 30 second shot. 1:2, 1:2.5 or 1:3. Then you try your flow profile and forget about time. You can also change grind settings at that point to dial in to taste. The last one is trickier. That one you want to go really coarse so that you cant hit the 9bar pressure. then slowly tune in the grind until you are just coarse enough to hit the initial 9bar.

[@ahmadhusaini8420]

Kyle, serious question here. How can you manipulate the pressure gauge by changing the flow paddle? I have a bianca as well and i set the pump pressure to 8.5. For example if i set the flow as low flow (1/3 of paddle), the pressure eventually build up until 9 bar. I can't maintain at specific pressure while playing with the paddle. Need help!

[@Baristan]

Did you find your answer already on this? I'm having the exact same problem!

[@ahmadhusaini8420]

@@Baristan no. But it's from flow control limitations. It limits the flow, not pressure. So yeah

[@pablo-zn1mg]

Any way to try these on the gaggia classic ?

[@KyleRowsell]

Try the allonge!