The ASG Dan Wesson pellet (plastic screw tip) revolvernalso accepts the cartridges of a Crosman Remington 1875. I had no original ASG DW pellet cartridges at first (due the revolver was not mine, and broken when I got it) so I tested my Remington 1875 rear loadable cartridges in it. And, hellyea, it works.👍🏻 (and I prefer rear loadable cartridges anyways).
@MegaFrank1960 Жыл бұрын
***Most of these guns use either SAE 1/4" or metric 6 mm allen keys. Naturally the 1/4" will not fit into the 6mm opening, BUT, the 6mm will fit the 1/4" opening with little movement, having the operator believe the sizing is correct. However, the 6mm fits just loose enough to nicely strip out the mag cap opening. Like you exhibited, be sure of your keys. It's not as easy as going on Amazon and ordering a new one. ***I find cocking the hammer and applying the safety on KWC 1911's makes for a smoother mag drop.***Although Pelgun Oil works, it still contains petroleum distillates unfriendly to airguns. For a dollar or two more, 100% silicone is a much better choice. ***Don't forget the occasional drop of oil on the rubber gasket holding your BB or pellets in the faux revolver shells. Also avoid leaving bbs and pellets in these shells for long-term storage. They will take a "set", and changing ammo one day might not result in the needed snug fit to securely hold them in place. Owning over 100 of these little gems, these are just a few things I've found......😁
@airgunreplicas77 Жыл бұрын
All good contributions, thanks!
@tiaorourke6565 Жыл бұрын
I am loading my cartridge with a CO2 cylinder. When I tightened it, gas escaped. If this because I have over tightened and the O rings are damaged. Is this fixable?
@cuthbertedmundv.escobar5853 Жыл бұрын
Is it all metal?
@airgunreplicas77 Жыл бұрын
Which gun do you mean?
@ShaunShearman Жыл бұрын
Oh my Gawd ! I laughed out loud when I saw the holster for your P365, it's the EXACT same one I use for mine and I keep the allen key in the EXACT same place for it, lol.....Great minds think alike (or fools seldom differ, I'll let you decide, lol). Top tips from me ? Use Pellgun oil on EVERY CO2 capsule (it's cheap enough when you're only using a drop on every capsule), it certainly will not do any harm and it ensures that the seals are in tip top condition, Regular servicing - clean and lubricate your guns on a regular basis (at least annually), a good quality suitable lubricant will extend the working life of all metal parts in the gun and FINALLY - Join a forum dedicated to Replica Airguns, where tips 'n' trix, good advice, stripdown diagrams and a plethora of other wonderfully replica related goodies can be found, try co2-handguns.freeforums.net/ for a friendly interactive forum.
@airgunreplicas77 Жыл бұрын
😂 yeah I think you mentioned that on a previous vid! Sound advice regarding the forum too! Some really knowledgeable folks on there with loads of great solutions/tips/info etc.