Top Tricks For Bending and Joining Pipes | Metalworking Project

Explore a wide variety of content in our carefully curated KZbin playlist: • Binge-Worthy Content
If you’re enjoying this video, check out our other projects! Subscribe to our channel for woodturning, metalworking, restorations, remakes, epoxy resin projects and more. You name it, we do it!
Subscribe to our channel → / totallyhandy
Check our Shorts channel → / totallyhandyshorts
#totallyhandy

[@carlsberg-gs6rl]

What consistently amazes me in these weld videos is the amount of skill the welder has in using an angle grinder.

[@timlong1462]

He's a beast with the grinder, but welds like those guys that stick weld with batteries and jumper cables in their safety sandals.

[@taylorquimby4004]

Dude... the majority of the video was the axe. It's fantastic! Why not make that the title? It's spectacular!

[@sidbec]

Probably the BEST welding/fabrication video: content, photography, editing, explanation w/o words. Could be used in any country.

[@gideonnel2654]

The craftmanship and originality portrayed in this video is worth a million "likes"!

[@jayantyadav9125]

Lovely presentation skills with crisp work ✌🏻

[@gadashendit]

Scorpion, is that you?! 5:56 "get over here" 😂

[@kevindunlap5525]

I've always wondered this: What is the purpose of cleaning the welds, besides aesthetics?

[@shinedown394]

Reveals undercut, other possible flaws, allows other passes to lay on cleanly, allows paint to adhere better, can increase corrosion resistance in some cases.

[@rosshall641]

Very impressive I like the dog's hind leg with the wood. But what you do with the steel. That is unbelievable

[@kennybarron2089]

Am high a/f now and that was the most beautifulest axe or anything metal I have ever seen be made

[@glennkrzeminski7539]

Love the curve on that handle

[@ihad2reload]

Giggity

[@baronbaronov760]

skillful hands, well done.

[@artlife6210]

that was really enjoyable, terrific artistic flair on the textured part too, subbed!

[@user-gz4op3wj6b]

Спасибо большое хороший урок👍👍👍

[@user-ee9fm8yu2m]

Шикарно👍👍профисионально

[@MASTER_BATOR]

Классная работа 👍

[@user-rg8fh8rx5h]

👌👌👌!!!!ИНТЕРЕСНО!!!

[@michaelbacile8439]

Man this is inspiring

[@Intenti0nal]

There are no words, only emotions! :)

[@romeovidalrodriguez7754]

hola el video está muy bueno Excelente 🤜🤛👍👏

[@alexanderTornel]

You make it look very easy, one question, welding with TIG without gas?

[@mixdiver12]

Great, but music is so annoying

[@massimoloduca8055]

Bravo ✌️

[@j121212100]

what was the point of removing rust elctrolytically if you take a grinder to it later? Now i see for the style.

[@donb347]

Far less grinding

[@user-og3xx8jj6c]

Сваривать огрызки это конечно одно дело, выдержать геометрию на изделии это совсем другое

[@Metalheavenjockeolsson3653]

Great 😊

[@ART-STUDIO71]

Молодец 👍

[@Toscanto]

Très belle hache

[@rusticrangebear372]

that black paint makes everything look awesome

[@umidtashmatov6681]

Super 👍

[@drkahara]

Cool stuff dude. Does the pen you weld with work on gas or electricity?

[@JonCampo91]

Both

[@RoBFE-fe5dh]

I would use a portaband for the cuts

[@user-xx4rm1zo8y]

Cool job🤲👍

[@user-sl3gw6mu8j]

Классно .молодец.

[@efrainzavala1919]

este vato !!!!!!

[@petr8068]

Famous!

[@atomicdynamo6062]

What welding machine are you using? I need something portable.

[@CB27]

Yes I'd like to know too. It's looks rather nifty

[@polux6866]

Its semi automatic MiG 😉

[@atomicdynamo6062]

@@polux6866 Pretty cool. What's the brand name?

[@batziii8745]

Its just a MIG welder. And no, actual MIG welding looks different, what you see is fake, TheFabricationSeries did a great debung

[@pero2935]

Great video. First example: how do you calculate the amount of material that has to be removed to get a 90° angle?

[@kumargouravbiswas3209]

At any point on a straight line there is 180 degrees. So to ge a 90 I would guess you would have to shave off the other half but I could be wrong too. Maths was never really my thing.

[@nikolai_kury]

90 degree angle, 90:5=18 degrees for each cut out triangle, that’s it😂😂😂 5th grade geometry here

[@dialectric1582]

Когда в школе по черчению, геометрии и рисованию не был валенком. ☝️😃 Но вот дровосек в конце никудышный. 😄

[@All-Fur-Coat_No-Trousers]

_YUH-YUH-YUH-YUH_

[@ghostoftheUchiha3250]

goes to show you.... you can amazing at restoring an ax and terrible at swinging an axe at the same time!😜

[@TzNuts]

Swinging an ax is like forming readable sentences. Not everyone can do it.

[@ghostoftheUchiha3250]

@TzNuts are you saying that because my sentence is missing the word "be" its impossible for you to read and comprehend? A 2 letter word threw you off that bad?

[@heathsmith1537]

What’s wrong with setting the saw at 45’ and cutting once ?

[@nUmBskulLL]

It makes a poor KZbin video

[@user-vb1yx9vp2j]

good.... 탐나네요. 도끼 잘봤습니다.

[@eyeballinthewoods7813]

The last part 😂😂😂🤣🤣😁😁😁🤣🤣🤣🤣😂🤣🤣

[@bo_arrow]

where do you guys find these beats?

[@mateakhalaia9618]

1.48 cool

[@AzizbekUsta]

Зур👍

[@CB27]

What's that rust removal trick? What's the liquid and what is added to it?

[@robinsailo5652]

Salted water

[@patriclark2480]

YO YO YO YO !!!

[@CRAZY.C]

great job. It's a waste to cover it up with a spray.

[@Neruomir]

The axe looked good but the heat treatment and temper is utterly ruined by the ark welder and creates a ton of stress points in the metal. Good enough for a decorative wallhanger but i would not trust it as a tool.

[@x808drifter]

Fine for making a picture frame but not much else. Nothing weight bearing.

[@tokitoktokitok2612]

Что это за сварка. Легко ей сваривать?

[@kaleidophon]

Same music loop for 10 mins?

[@colemiller2149]

There is no metalworking project at all? Like 2 mins of tricks then he makes an axe! What even is this title

[@user-fi9ue9hn6l]

안경은 꼭 쓰세요 눈에 철가루 박힙니다.^^

[@JugalKishor-yw7jq]

Waldeg msen nam ? ?

[@JugalKishor-yw7jq]

ये कोन सी वेल्डिंग मशीन है ? ?

[@user-rj7iw8fd1t]

Омма коил!

[@user-ir4yf8ci8e]

Ты считаешь это шедевром сварки, что ли? Если да, то ты ошибся😁

[@maxmudxamroev3272]

офарин

[@aldeirsilva6410]

👏🏼👏🏼👏🏼👏🏼👍💯🤝

[@andrew09021977]

2:50 Автор, так ты расскажи подробности то! Что за жидкость? Что за металлы в ней (кусок на который ты положил топорище и кусок который лежал рядом)? Напряжение 14,5 Вольт, а сила тока какая? Ток, я так понял, постоянный? А куда подключать "+", куда "-"? И самое главное сколько нужно держать? И, вообще, может стоило сперва провести механическую обработку, а потом наносить легирующий металл электролитическим способом?

[@TheLasombra077]

Yeah. Only when it’s this thing flimsy stuff.

[@topfilms357]

Сколько полуляхов там? Кто мерил?

[@RealFirstExplouder]

Замедленно смотрел на процесс рубки. Возникает вопрос, а зачем обманывать? Рубить же этой херотой не удобно, даже монтировать автору пришлось.

[@josuemelendezamezcua8541]

🖐🏻😮👍

[@woodshed_moments]

And, if we could just junk the centralized academic juggernaut ticking everybody off from producing lazy citizens and just ignite a revival in this country of craftsmanship and start healing within and making American craftsmanship And solid work ethic mean something again, people wouldn’t be so predisposed to weep for America’s future, craftsmanship has a value.

[@TopBoy-Gaming]

looked better befor bluing

[@schuylerashton813]

Do better welds

[@jakevolk9]

Tacking a seam like that is not proper welding. If your going to demonstrate welding joints and such please weld it properly as well

[@user-xp9ri2el5i]

Как можно полуавтоматов делать настолько никчёмный шов? Попробуйте перенастроить мощность аппарата для начала. Покраска сварных деталей без грунтовки - это просто топ решение от таких "мастеров".

[@drewpruitt4425]

As a certified welder. To everyone out there watching this: please please don't just tack weld all the way through. It's just unskilled so unstable. I would be fired so quickly and stripped of my certification if I ever tried to get away with anything like this

[@RoBFE-fe5dh]

Right? Full passes mofos!

[@olsonusmaximus]

Okay

[@clonex7248]

As a certified welder you should know what weld is enough for what type of application. Aslong these are not structural welds and looks are more important this is totally fine.

[@desolatorready2644]

​@@clonex7248 esa porqueria se va a romper

[@clonex7248]

@@desolatorready2644 as I said it highly depends on the actual application

[@candratan6604]

If I watch your videos every day, will I get the certificate 🥹🥹

[@dmitryorloff7019]

Бесполезый сувенир😂. Топором работать не умеет

[@williamsalvesdelima8368]

Alvin e os Esquilos breve vmo ne qixatise e o que eu faço é um 1⃣ que não me recordo de onde foi o e o que eu faço é um 1⃣ que não me recordo de onde foi o e o que eu faço é um 1⃣ que não me recordo de onde foi o e o que eu faço é um 1⃣ que ❤

[@prateeksarin3555]

This is wrong because points of failure are more than 2 traditional method of elbows plus pipes is the right one more no of welds/jobs more problems within any structure more unibody much better

[@calebjmcguire]

English please

[@pathfinderlight]

The welding in this video is awful, particularly around 0:51 where he does the tack/cut trick popular on KZbin. This creates terrible welds that won't hold IRL.

[@mehrojabruev325]

Gabyo‘q

[@user-yv6jq2pm6m]

🫶🪓🫶👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻

[@amzhiltbakarrean8597]

Более уродливой ручки я не видел, похож на топор с пузом

[@petercraig6990]

I assume I must rate my employee higher then I do, they can weld stiff and sturdy 90 degrees angles without the extra time consuming and material waste the guy in this video do. From an ISO 14001 perspective the guy in the video is a burden.

[@tasminski]

Самое главное хорошенько покрасить свежезачищенную хрень

[@akaretnikov]

Ну, хоть кто-нибудь может объяснить: зачем перед болгарингом все эти пляски с электролизом? Есть в этом какая то страшная тайна? Всегда считал, что ровно с таким же успехом можно ржавую деталь сначала например покрасить или просто помыть.... в чем я не прав?

[@PeterNetped]

[@Bigbriansc]

Lot of work for something totally unnecessary.

[@davidwilfong5820]

Weak all the cuts gives it a place to break very sad

[@Mike-es5zd]

Wanna beee’s 👇