Making a half moon leather knife

In this video I make a special knife for leather work. An interesting challenge as always!
Check out my recommended tools/gear:
www.amazon.com/shop/torbjorna...
If you like my videos you can support me at:
/ torbjornahman
.. or buy a T-Shirt here:
www.torbjornahman.se/tshirts

[@holoex4475]

Can we just appreciate how beautiful the shots of his house and the entire editing of the video is? Really wonderful

[@torbjornahman]

Glad you like it! Thanks!!

[@ericksciallis3185]

I completely agree the doffernt shots and cuts make for a much more immersive viewing

[@agusriyanto7851]

@@ericksciallis3185 😅😍😍

[@user-rm6rd7ot5r]

0

[@wilsonchancay8334]

P

[@calviajante]

I could make one, too. I just lack the tools, the machinery, the knowledge, the skills and the talent. But I have the time, though. It's a start.

[@Cabeza492]

Well if you didn't have time you couldn't do anything even if you had all the tools and skills.

[@ibrahim-sj2cr]

...and the determination

[@edwarddrost5299]

I you have a piece of paper, at least you can cut brass pipe. Start there.

[@supermanlol5865]

What about the resources?

[@matthewmarting3623]

Surprisingly easy to make knives. With an angle grinder from harbor freight, a hacksaw, drill, hand files, sandpaper and a clamping method you can make a covid 19 knife during the shutdown. That’s how I made my first 5-10. Walter sorrels has some tutorials. Really, it’s pretty easy- just time consuming.

[@mynameisgod666]

Wow, this blacksmithing project is truly amazing! The craftsmanship and attention to detail on the kindling splitter are outstanding. Super impressed! The skill and artistry displayed in crafting this kindling splitter are simply superb. A true testament to the blacksmith's talent. Bravo!

[@roberteaster6655]

Does anyone else think that his making of the brass ferrule, is the most impressive part of this?

[@txikitofandango]

that's the part I was looking forward to most from the thumbnail!

[@disturbedmario3913]

Never saw something like that, i'm really impressed!

[@JackPorter]

yeah, did you see him cut that brass pipe with a piece of paper? so impressive!

[@ashishsuvarna3440]

I do ... It was indeed worth the watch 👍

[@tale7955]

It looking like 👄

[@scotlandwoodwork2553]

Very reminiscent of the Inuit Ulu knife. Awesome job.

[@mikeford963]

Ulu has a looped handle and is quite a lot larger as the blade isn't quite so tightly rounded. Being Canadian we're taught about(or we used to be) a few of our Native cultures tools

[@scotlandwoodwork2553]

@@mikeford963 That's why I chose the word "reminicent".

[@mikeford963]

@@scotlandwoodwork2553 Fair point.

[@MsXtremeCamper]

The ongoing battle between metalworking youtubers about cutting stock the most creative way is really quite a bliss to watch.

[@torbjornahman]

Ha ha... didn't know there was a battle!?

[@MsXtremeCamper]

@@torbjornahman A silent and friendly one :) Loved the video!

[@Sneakymisha1]

The paper cutting the metal was phenomenal

[@Charlie_the_Chair]

alternate title: meet the most Scandanavian man in existence

[@N-A674]

Your tools are really pieces of art. And any time I'm watching your video, I'm amazed how clean your workshop is. It looks like a surgery room of the modern private clinic.

[@torbjornahman]

Thank you so much!!

[@bwood6337]

The video itself is art!

[@t1t4n66]

He needs to make a samurai sword. Seeing him work, he actually inspires that much confidence

[@jararibitou3007]

Wx

[@claxan]

I think from all the intricate, precise and masterful work you put into this project the thing that impressive me the most is the fact that you did not use a drillpress. How can one drill so precisely and straight with this bare hands. I bow my head to such craftsmanship.

[@abrahamd2k]

I've made a couple leather knives in the past couple years, and they do work great for leather. I like your design just the right size.

[@brentnicol6391]

What an absolute art. The making of the brass ferrel is amazing. Great craftsmanship.

[@torbjornahman]

Thanks!

[@Graeme758]

A man who knows how to make a knife and a video. Clearly shows the process then cuts out the dull stuff. We all know what grinding looks like, no need to show us the 20 minutes of grinding. And with all that obvious skill also show us his errors, minor as they are. And his humour. Brilliant.

[@zarrus2172]

But it’s so damn satisfying when they speed it up no?

[@RachadRead]

Art, creativity, mastery ... your work is amazing, you have to open a school for generational education. A thousand thanks and appreciation

[@torbjornahman]

:) Thank you!!

[@edwinleach7401]

I have watched this video several times. It is fun to watch a work of art being made. Beautiful work.

[@BosisofSweden]

Sitting here with my morning coffee, relaxing, watching a real craftsman do his thing .... the serenity of it ... I totally want to buy this knife!

[@torbjornahman]

Great morning! Thanks

[@c0nnys1]

The way you closed the end of the brass pipe was amazing !!

[@ViiKing_]

Indeed

[@ssstoma]

the effort you put not only in the tools, but in making the video itself, is really commendable! I'm always entertained by watching you and your "magic tricks"! thank you sir and well done as always!

[@TheSilenceOfTheVoid]

I love the way you forge! Thank you for showing so much of the process!

[@rentregagnant]

Blacksmithing as an art. Beautiful.

[@general5104]

I appreciate watching FERFECTION, step by step, leaving NOTHING for happenstance, meticulously making every motion count, then checking his labors with Diekem for fit and eveness! WOW! It's nice to watch a start to finish, nothing left out, Real-life, honest man's love for his craftiness. He shows you his Wit, and his other interests, but not to the extreme! And all this and possibly more, done with perfection, the camera angles, the flawless editing, and the actual sounds of the work against the grit! And, if that would seem perfect, he went one better, he did it WITHOUT an annoying music background racket! He didn't run his mouth, telling what your eyes were showing you! The world could take a lesson on how to make a perfect video, from this fellow! I applaud you, sir! ❤

[@torbjornahman]

Wow, thank you so much Lee! So very nice of you.

[@jdhcpo]

That work on the brass ferrel was unbelievable! Best craftsmanship I’ve seen in a while!

[@cliff567]

I have used grinders as you do and I have ad-hocked builds on the fly. You have great physical abilities associated with mechanical thought processes. I like you. I am 69+ but I will attempt to encourage my younger kin to look to you for knowledge that is wanting in our society anymore. I will start looking for barrels. Nice lathe work. keep making videos, the world will need your info soon.

[@torbjornahman]

Thanks!

[@armandorivero5144]

Lo que haces no es una herramienta, sino obra de arte.

[@douglasfathers4848]

It is so relaxing watching you turn a old rusty saw blade into a amazing leather knife ,you sir are true craftsman. With a green thumb love your garden.

[@PeopleAlreadyDidThis]

Torbjörn, I thought your work was impeccable several years ago. It has matured almost beyond belief now. It is such a joy to see.

[@torbjornahman]

Thank you!!

[@tonyn3123]

It's an ulu! Native Alaskans use them for everything. Especially skinning and butchering animals. Really nice job you have done! When I visited Alaska, I bought one for me and all my grown kids. Really nice cutting tool.

[@TomCelar]

Wow I just got into leathercrafting 2 months ago, looking into buying a halfmoon knife later this year and this was so beautiful to watch, wonderful job!

[@torbjornahman]

Thank you!

[@hatchetaxeandsaw3592]

I wish these were available for sale. I understand TA doesn't sell his work and I get why. Tomas, what knife did you end up going with? I too am starting my kit and would like to add one of these.

[@TomCelar]

@@hatchetaxeandsaw3592 I actually ended up using three things to cut leather, but neither of them is as sophisticated as the one in this video. I use a basic detail knife, a $30 Elle Mikihisa skiving knife and Olfa rotary cutter.. but remember, the most important thing with knives (o matter type or quality) is your sharpening skill, it makes night and day, especially when skiving! Have fun, mate :)

[@garygrimaldi3230]

Beautiful work - really admire your meticulousness! Oh, and thank you so much for not having any annoying music playing the whole time. Don’t understand why do many makers feel the need to do that. It detracts from the experience. It is so good to just hear the sound of the tools, and to be drawn in to a more intimate experience of seeing you do your work.

[@eastexas9793]

I love watching your raw materials come to life! You ever do any damascus? Hope you and your family are safe! Thank you for giving us an escape from the world!

[@torbjornahman]

Thanks! No I haven't done any pattern welding yet...

[@dominic8249]

@@torbjornahman I would like to see it and it's not that difficult, but a nice surprise every time

[@BruceBoschek]

I just discovered your channel yesterday and I am speechless. I watch many craftsmen doing wonderful work, but you are truly a master of all trades, an artist, artisan and all-round Renaissance man. Thank you so much for sharing your talent and your expertise.

[@torbjornahman]

Wow, thank you!

[@atfundum]

A very fine piece of craftmanship ! I Liked this very much. Well done !

[@scottvercuski8993]

Looks beautiful and cuts like magic ! Chris, the gentleman who runs the Clickspring youtube channel, frequently uses superglue to hold brass to an arbor. It breaks free with just a gentle heat and bonds very well.

[@torbjornahman]

Thanks! Yes superglue is the next step... Just for filing/sanding I wanted something simple.

[@scottvercuski8993]

@@torbjornahman Hoping you post some leather working content in the future !

[@psidvicious]

Torbjörn, I’m running out of superlatives to describe the work you do in these videos! Once again, just an incredible piece of work/art! The production of your videos is just as outstanding as the pieces of work you’re producing AND seems to get better and better with each one you put out. Thanks for taking the time and putting out the effort to make these. Just a pleasure to watch every time.

[@torbjornahman]

That is great to hear, thank you so much!

[@jasonvore8816]

Pure, meticulous, and pin point accuracy. You sir are a master of your craft, one craftsman to another I tip my hat to you.

[@gersonzaneli617]

Os maquinários e ferramentas ajudam 30`/., os 70 ´/. é pura habilidade, vc é uma excelência no que faz, parabéns, gostei muito.

[@Maskedbrawler]

I gotta say, the level of detail is just stunning. You're a true master

[@The_Lorax0331]

I clearly made the right purchase when I bought myself a Beaver Craft set if you are using them as well. Absolutely beautiful work and I hope we get to see some leatherwork here shortly.

[@kartune3395]

I'm not gonna lie, the knife looks more like it was made of metal than leather.

[@utkarshtripathi221]

Hahahaha.... That is a joke right?

[@xp3r670]

Omggg idot it for cutting leather not made fron!! >:((

[@generalmoose4606]

Is it a joke or not. If so then your wrong. It’s made to cut leather and formed from steel.

[@youtubeguy298o]

I’m pretty sure this was a joke. Edit: Spelling mistake.

[@Semtex_error]

Wow people are dumb this is clearly made from cardboard

[@qqg]

I love it that however well equipped a workshop may be, the blade annealing is always best done in the kitchen oven. It has to be! ("honeyyyy, how long do you have to keep your blades in here? I have to cook dinner!")

[@olenilsen4660]

Well, 225 degrees is the perfect temperature for a frozen pizzza, so you just throw in one of those ;)

[@johanlarsen9887]

@@olenilsen4660 😉😄

[@ColinForBooks]

i just watched to learn what the knife is for. glad i watched the whole process!

[@johnq5284]

Saddlemakers call it a "Headknfe"

[@wen1746]

INCREDIBLE! I love watching you putting the final details to every step, mesmerizing. Thank you, hope you and yours are safe and well!

[@djebat88]

A masterpiece. Highly appreciated craftsmanship.

[@tiborfeher2138]

wow, apart from my two children and my wife, i have never seen anything more beautiful. I've seen your youtube tutorial more than ten times, but I'm always amazed. An absolutely perfect job, no one can do it more beautifully and better than you.

[@torbjornahman]

Wow, thank you!

[@phishguy5230]

19:07 i used to have a lemon tree, but the lemons tasted like coffee because the compost we used was mainly coffee grinds.

[@torbjornahman]

:) Interesting!

[@ViiKing_]

That sounds delicious

[@salilushaj6815]

J.

[@joshua43214]

Beautiful knife. You hold it in your fist vertically when slice - like you where stabbing the material. You draw the knife towards you as you roll the handle away from you. You splay your fingers over the blade with the knob in your palm when skiving, and push away from you, or hold like above and sweep along the edge depending on the whether you are making an over or underhand cut. This is the reason for the stubby handle. Using it the way you are defeats the reason for the shape of the knife and blade, you may as well use a utility knife (they do an excellent job when used properly). Your knife has a bit too much sweep at the points, you are running the risk of nicking your wrist when held properly.

[@hadmatter9240]

It is beautiful. I was hoping he was going to make a cover for the edge, then he pulled out the leather and just tested it.

[@icebabysnocain]

We call this knife "ulu". It is an ancient design used by indigeonous people for many jobs. There are about three sizes of ulu.

[@nathank7006]

Who is we?

[@alcasey3551]

@@nathank7006 Canadians and of course Inuits!

[@desredmon]

For the first time you used a head knife that was not bad at all! I am frustrated with the durability of what is available so I was watching the video on forging out a blade but was pleasantly suppressed by the detail you put into it. Thank you again for the great video!

[@johnnymccrackensr1389]

Well done, you are a very well disciplined individual,most Craftsmen are looking for the easy way out. Thank you.

[@Madlintelf]

It's always a pleasure watching you work, I never thought it would turn out to be a work of art as well as a useful tool, thanks for sharing your skills with us!

[@zecrets]

You've made a masterpiece ! Kudos to your craftsmanship

[@gatotsubandrio87]

The making of the buckle and the stiching rather than rivets, wow. Been watching many kind of these, you are the best. Keep doing it property as you where. You have got my vote man. Many regards from Jakarta.

[@ckingclosur]

why there is only a like or dislike button this is not fair there should be a button for marvelous or awesome, astounding, astonishing, breathtaking I would press them all

[@WhiskeyDjak]

This, sir. Is a masterpiece, especially your workshop is so clean, been watching this video while sitting still, and complete silent. And please, continue your work, sir.

[@torbjornahman]

Thanks! !

[@bradleytuckwell4854]

Amazing craftsmanship and your attention to detail is so on point

[@7come11two]

Marvelous. A work of art. Great attention to fine details. Quality and workmanship at its finest.

[@anthonykent7983]

Beautiful brass work superbly crafted. It gave your normally beautiful blacksmithing and wood work that wow factor. Thank you.

[@dennisgonyier9542]

I have a new perspective on the power of a “paper cut”! Very nice job!!

[@fennec4150]

As always, creations that are true works of art. A valuable source for understanding and a real pleasure for the eyes! Thank you.

[@anthonycapparelli5570]

You are A master at your craft. Thank you for showing people the beauty of doing things by hand with an extraordinary attention to detail.

[@crystalsoulslayer]

That knife is absolutely beautiful. I've never seen a tang pinned like that before. Reminds me of a drawbore mortise & tenon joint, which are often used specifically when gluing is undesirable or not an option. Also, nice lemons! Swedes seem to have a thing for growing food... my first big woodworking project is a couple of raised beds for my mom to grow tomatoes and cucumbers in. Finished one, just waiting on my mom to get the soil so I can build the second. Hand tools are fun!

[@neilgreen917]

Simp

[@Theremoore]

Beech wood was a good choice! It matches the steel and brass, and it will age with the metal nicely without getting too dark. As a fellow swedish knifemaker(hobby/personal use) i applaud the no nonsense perfectionism, i appreciate when people make knives with common sense. I like that you went through the somewhat troublesome task and showed how to make the hole/slit in the handle for the tang, like the old wooden morakniv handles have. I dont have a lathe, and the few times i have made a hole/slit in a handle, i've used needle files, and it's annoyingly time consuming. Next time i think I'm gonna try your sawblade method(somehow). Good job, and thanks from Västra götaland(Skaraborg).

[@torbjornahman]

Tack!!!

[@vijaykirtani8559]

Highly appreciable workmanship and quality of work and precision. Best-Wishes and thanks for sharing this great video.

[@bertrandkieffer1050]

Magnifique réalisation ! Superbe tutoriel très complet, c'est merveilleux. Ce n'est pas un outil que vous avez réalisé, c'est une œuvre d'art ! Merci pour ce partage. Bravo bravo

[@muhammadaqeel2696]

love,respect,appreciation,excellency with your job and perfection in every single corner of your tasks has shown under one roof that is Torbjorn Ahman. Love from Pakistan

[@Prod.VXNILLA]

wtf is this comment 🤣

[@KtenEditing]

@@Prod.VXNILLA haha its so wholesome

[@edgarmilson8686]

Torjborn, you have a gift. You cab do things that I could never do, even if I practised or trained for years. All the best, Edgar

[@superspecialty5169]

Yes… total subject matter focus. Superb techniques, I can use… TYVM!

[@traviscoffey5186]

Am I the only one that thinks his workshop has a really calm feeling to it

[@adriansowma9420]

ya it does weird

[@anwarulhaqqureshi]

This is art, this man is a tool scientist, he really knows the tiki taka of blacksmithing, i haven't seen such artistic work before, sir salute to u on ur fantastic work, we wanna see u doing some leather work next, u can do it sir, u really know the measuring games and u can do it, just entertain us next time with leather work..

[@jeremihbrambila8552]

Límite las uñas

[@tinhha7839]

@@jeremihbrambila8552 mu

[@tinhha7839]

@@jeremihbrambila8552 j hư khsh

[@tinhha7839]

🎑🎏🎏🎗️🥊

[@tiokait6237]

he work's so calmly and with such precision that is satisfying to watch

[@b761787]

You are very talented, a pleasure to watch.

[@theeccentricadam]

You my friend are a true craftsman! Thanks you for all the videos! Greetings from Ohio, Usa

[@torbjornahman]

Thank you very much!

[@sarcasm2k]

The "Half moon" shape we call Halvmåne in northern parts of the world is called "Crescent" in english. Good job, Torbjørn :) This was very satisfying to watch. Nice little plants as well!

[@harrymoyes5069]

UK English at least,"Half Moon" is also common.

[@wilsonstevens1535]

I have one made in the early 1900s from my great grandad. Mine has a rosewood handle, and is a little smaller, but almost identical. He did an outstanding job on this project. He has more time than money because I sure wouldn't spend hours making one unless I was bored and just wanted a project. And I have enough projects without making my own tools to make the projects.

[@perdroantoniosanchezsorian806]

5b

[@daethalion1725]

What a work of art. Absolutely beautiful.

[@particularsauce]

What a commitment to what you do. It is outstanding work approach. Your work brings a good dose of satisfaction.

[@sundaysbest8023]

wow, you sir are a master craftsman. im a fan.

[@cameronflack2254]

I was really hoping we were getting a two-for-one deal and we'd get to watch you make the sheath for the knife. Also, I have seen people drag those blades as well. Don't know if its appropriate as I don't do leather work. Keep up the awesome work and stay safe!

[@cameronflack2254]

@J What an honor it must have been to meet such a craftsman. I have been around a few and boy, its crazy listening to the stories they tell.

[@digital_harry]

He was applying somewhat the right technique, that is pushing, need to be careful with the non dominant hand, however, we are in front of a master of many trades, hats off to Mr T.A.

[@mattr3927]

Thats the most beautiful knife ive seen! Amazing craftsmanship sir!

[@JuanFelixChang]

In the middle of the GOD OF WAR junk appeared this this peaceful and resourceful presentation of craftmanship, will make my finishing products more appealing to trinkets bought in the stores

[@user-zl1tf3lq8u]

Божественно!!! Я с восхищением наблюдал за процессом, невозможно оторваться!!!

[@torbjornahman]

Thanks!

[@user-nq5sb4xn5j]

خب

[@greenworld8077]

Thanks you very much for your visit mine. I have many things from steel

[@yab3972]

Ну такэ)

[@user-ev8bh4oq3l]

а я еще и чувствовал у себя на лице идиотскую улыбку))

[@henrikhveltir4149]

this literally made me subscribe after watching the entire video... Tremendous craftsmanship man... very inspiration to see all the techniques you use and just how fun you make it look. Keep banging out the great content. With Love from Norway :3

[@torbjornahman]

Thank you very much!

[@ratte7640]

9:33 Man:*slice off the golden brass with a paper* Me:WHAT HOW

[@outbackladas]

“WOW”, what a tremendous effort! The best part for me was the forming of the brass ferrule, fantastic effort and a pleasure to watch. Can’t get enough of your great videos. Regards from an admirer in Australia.

[@torbjornahman]

Thank you very much!

[@Shurik0587]

It is always interesting to watch how you achieve the ideal from scratch with your skill👍

[@janotvz]

I love your work, always with great delicacy! Thank you so much, great work! Hope you and your family are safe!

[@horstthiele4810]

Beautiful workmanship, thanks for a great video

[@user-fb7hh1fp7f]

Понравилось как округлость с помощью фрезы вытачиваешь , быстро и аккуратно.

[@thatonneguy]

Start of the video: Why is this 25 minutes? 17 minutes in: Oh there's the linseed oil. I understand.

[@axiom_rqc8467]

That Onneguy what

[@Cadwaladr]

I always seem to have trouble with brass. I'm very impressed as always by your ability to make metal do what you want it to.

[@torbjornahman]

It took me 3 tries to get that one right... not always straight forward...

[@stephenchick2454]

It can really depend on the exact alloy, some truly hate the hammer.

[@NoNonsenseKnowHow]

Incredible skills! I need to step my game up. Thanks for the great video

[@GuilhermeSilva-rp2it]

Insane!! Great skill, great craftsmanship. By the way, Carnaúba is a wax made from the powder that remains on the leaf surface of a brazilian northern palm tree. It is really excellent to polish wood, and it is used in the making of many products, as cosmetics.

[@flaviut]

Incredible, a very big fan of yours. Keep making this kind of movies, there are quite educative. Piece of art!

[@karlmarx1202]

appreciate your patience,talent and perseverance with all my heart. I enjoyed every second of the video.

[@torbjornahman]

Thank you very much!

[@yassermuhammadelabed5238]

CONGRATULATIONS. MAY GOD ALWAYS BLESS YOU. AN EXCELLENT PROFESSIONAL. ALSO, WATCHING YOUR VIDEOS DISTRESSES THE PERSON. A BIG HUG. THANKS.

[@torbjornahman]

Thank you so much!

[@poopenfarten7194]

Yo man turn off caps lock

[@bean_soups6407]

Caps

[@carammatei7853]

Grozav! Lucrez in piele si sunt incantat ,de ce a putut iesi dintr-o panza de fierastrau veche ,un adevarat artist ! Felicitari !

[@ckneelakantaraj7829]

While watching the video I became little spiritual and my thought got elevated. God made man out of dust by his divine skill so perfect in the same way you took a rusty blade and made a thing of beauty. Well done.

[@Andy-in8ej]

Iddddiot.

[@anonymousonlineuser6543]

@@Andy-in8ej makes it your signature, troll.

[@mkivy]

Beautiful sir...love the lemons and ur green house too. Take care and be well!

[@plakor6133]

Beautiful knife. Use with care, those half-moon blades can really get you.

[@JMFH578]

This guy should have millions of subscribers.

[@torbjornahman]

:)