Toro Z Master 4000 Series - 1st Look USA - MainStreetMower

[@mainstreetmower]

See how this mower held up for us AFTER 3 YEARS: kzbin.info/www/bejne/ZqenoIOwZa2mfcU

[@pementerprises7706]

The 5000 and 6000 series will remain with the G3 frame which is the current setup. It is also more heavy duty than the 4000. The change in frame and switch to the 4400 and 5400 are to get the price point they wanted with larger transmissions and engine.

[@georgiafan6618]

I observed the I beam frame up front is not welded completely through along its length. That’s odd. Is it stronger than a fully boxed frame? Toro doesn’t list pump options in its website when you order. What are the differences between the 4K, 5k, and 6k series? Toro doesn’t go into detail about that - helps to make decision. Excellent video! What a cool mower. 👍

[@nathanshores7962]

I’d like to see an in-depth review of this mower (e.g., your thoughts on longevity, how it cuts over time, and your thoughts on the mower being used as a commercial mower over time).

[@mainstreetmower]

Thank you for your suggestion Nathan. We'll se what we can do.

[@johnhill9910]

Looks like a gravely with a toro seat/deck. Hydrogear instead of parker? Sounds like higher maintenance cost. Ill take a 3000 before there gone for good.

[@johnhill9910]

There's a single hydraulic tank reservoir. When changing oil would you have to open both vent plugs and fill each side at the sametime? Whats the chances of cross contamination down the road?

[@daniellang6112]

Beautiful mower! BUT $12,000 for a 48 inch?!

[@mainstreetmower]

I know everyone thinks that 48” mower should be less expensive but essentially the same amount of manufacturing expense and labor goes into building them as does a 60”. If you want to spend less on a 48” buy a ZMaster 2000 for $8999, it will be less mower, but if the 48” is your light duty machine it may fit the bill.

[@richscott2952]

I’m just waiting for it to come out with a rear discharge deck

[@mainstreetmower]

That would actually be sweet!

[@MyF-qx1tp]

I finally used my new Toro 4000 series pro with the kawasaki 25.5hp, and love the power and strip it was leaving behind. I tried replacing the stock blades with new super high lift blades with the 5/8 center hole but found out the stick blades comes with a reducer adapter and blade has larger center hole. do u know what size center hole? is it 15/16?

[@mainstreetmower]

Affermative. It is a 15/16 sized hole. Started in 2020 on commercial Zero Turn TORO's.

[@MyF-qx1tp]

@@mainstreetmower thank you very much for the info

[@MyF-qx1tp]

@@mainstreetmower even with the 25.5 hp kawasaki the Toro 4000 52in leaves very nice stripes without any bogging. I'm so happy very the purchase

[@mainstreetmower]

@@MyF-qx1tp We're glad your mower is treating you right. Enjoy the mow!

[@gregorymandile2321]

@@MyF-qx1tp good luck with that Beast

[@marclutz2993]

What exactly is HDX?

[@ChevyGuy70]

I’m looking at a toro for my lawn care business that’s starting next cutting season. What toro would you recommend for a guy on a budget? Yards are larger than the average neighborhood, bumpy terrain, and generally wet and thick grass in the morning. Trying to be cheap as possible but I don’t want to sacrifice quality either. Love your videos

[@mainstreetmower]

Hey Seth, We're glad you enjoy our videos. We love having the conversation about the best mower that might fit a certain business or yard. If you're interested in that chat, head down to Main Street Mower in Winter Garden. As for a quick conclusion, we would recommend a Titan Max. Check it out.

[@ChevyGuy70]

@@mainstreetmower Awesome! I’ll be sure to take a look at both of those options👌

[@elitelawncare4966]

Could you comment on the which would be a mower of choice for a heavy commercial user, and why. What have you seen are the major differences between 4000 and 6000 , assuming same HP/Engine is selected , 60" deck

[@mainstreetmower]

Yes we will make a video on exactly that soon

[@trevorwilliamson8625]

can someone please help me. I don't understand the deck height adjustment brackets. Why are there so many holes and what are the 1-5 numbers used for?

[@shanepipkin4041]

how does the one with 26 and 15 tires ride vs standard tires? big difference

[@elevationlandscape]

So is this model completely replacing the 3000 series or will toro still offer the 3000?

[@mainstreetmower]

The 300 series is gone for good.

[@jeffreywhite7657]

This is my opinion, but I believe they messed up switching from Parker to Hydro gear. Parker is a far more superior transaxle.

[@shanepipkin4041]

what's the weight of this machine?

[@mainstreetmower]

The weight on TORO Z Master 4000 series ranges from 1,085 lbs. to 1,185 lbs., depending on the model and specifications. You can find more info about mower specifications here: cdn2.toro.com/en/-/media/Files/Toro/professional-contractor/Commercial-Mowers/2021/2021-z-master-4000-zero-turn-mower-sell-sheet-v3.ashx

[@crazyhorseracing6130]

What is the price for the 4000 series?? Thanks for the videos!!

[@mainstreetmower]

Hi David, you can find pricing and product availability on our online store here: shop.mainstreetmower.com/

[@Liledgy100]

@@mainstreetmower really? You can answer other questions about the weight of the mower, tires, engines. But, refuse to answer this one. No thanks!

[@polarisman09]

Altoz Tracked Zero Turn mower has 37 Hp with a Brush Hog Deck and a Finish Mower

[@polarisman09]

Trying to catch up the Altoz Zero Turn mowers

[@Adventureswithmike1]

Nice....

[@mainstreetmower]

Thanks

[@turfsuplawnpros7415]

Do you own main street mowing in Texas?

[@mainstreetmower]

No relation

[@jonathanlitten5947]

Wright has a 40hp zero turn

[@mainstreetmower]

I am sure we can drop a LS motor in the back of these things, but it seems a little unnecessary.

[@mainstreetmower]

Also would you like to be the guinea pig on a 40 hp engine from a company in chapter 11 bankruptcy?

[@gglawncare560]

Ferris introduced the 40hp to the world...

[@oscarsandoval4328]

Toro ANYDAY before wright, or Ferris 👍

[@ikonoutdoorsolutionsllc4178]

@@oscarsandoval4328 What about the Exmark?

[@garycarter5641]

Video is three years old.

[@mainstreetmower]

Yes sir, that's when this mower came out. We have done much newer comparisons with this unit now. Check it all out on our channel 🙂

[@michaelcarpenter2709]

I have this mower 60" hdx pro with the 31 kaw with the 2 day promo it's was $9600. For that price point and its capabilities it is hard to beat & pass up. Toro, scag, JD, exmark, hustler they all cut grass well. I'd be pressed to find anyone who thinks they can look at a cut lawn and tell which specific brand cut it.

[@gregorymandile2321]

getting the same mower May 7

[@seabass22]

How do y’all like the cut compared to others? I have a jd and a scag tc1

[@kcimages5157]

Is it a Gas hog ?

[@rogelioalonso8272]

Jao meni

[@jeremymarquardt9053]

Is this farmer wearing skinny jeans?

[@rico1319]

This guy talks so much but gives you so little information! Wish they find somebody else that can give you some real specs and strength of the steel tubing etc. Not just (it feels so good like a Toro,) (they simplified it blah blah blah,). 👎👎👎

[@Charlie-fc1mh]

Love the 4000 series, but before I hand over 10 to 11 grand, I got to be sure that those hydros are going to go the distance. I know they've got a good warranty, I'm just not willing to be the guinny pig

[@Charlie-fc1mh]

Also read the review of the guy who purchased the hdx pro and put around 110 hours on it and one of the hydros started leaking