Just finished replacing the solenoid on my toro. Works like a charm! Thanks for sharing your video Helped me a ton!
@kbltexmex Жыл бұрын
Glad it helped
@SeanCotton2 жыл бұрын
My lawn mower would not start . After watching this video, I ordered and installed the solenoid. The only issue I had was getting a plastic cap off of the top of the original solenoid was a little challenging, but I got it off. You saved me a lot of headache and frustration!! Thank You so much!!
@mattsara28024 жыл бұрын
I love how you made it work even when it wasn't exactly the same. You are right about keeping all nuts and bolts and washers.
@jennibyrd7908 Жыл бұрын
Omg I am so thankful for you. Single woman juat fixed her mower because of your video!
@cherylwillard86123 жыл бұрын
Thank you so much for the detail! I found so many videos that JUST showed one part or the other - not tracing each part of the process.
@douglasdowling47737 ай бұрын
Buddy you just saved me a headache LOL ! Thanks ! Can't wait till daylight to get working on mine . You made it look easy . I've got one just like yours . You helped me out a lot . Thank you sir .
@Caricaturesforlife2 жыл бұрын
Man, I thank God for you making this video, it solved my problem. Now I don't feel defeated!
@peteaiello178411 ай бұрын
Great straight forward common sense. 💪 Fixed it with testing just like you said!
@jasonlamontagne5035 Жыл бұрын
Thank you for the direct and no nonsense instructions! We'll done.
@erikatorres7750 Жыл бұрын
Thank you for helping! I fix my Toro by myself thanks to you
@kbltexmex Жыл бұрын
Glad I could help
@randyshreds2 жыл бұрын
Thanks for making this video! I had run through a field after doing the yard with a lot of brush in it and had a bunch of brush wrapped up throughout the mower when I finished... So, I pulled the brush out and rinsed off the mower. Trying to start it up to put it away and nothing. My first thought was I got the switch wet. But, that thing has sat in the rain before and not had an issue. The first part of your video was what solved my problem. I started checking connections. The brush from the field did a number on my connections. I feel stupid and relieved at the same time! Thank you!!!
@kbltexmex2 жыл бұрын
I’m glad it worked out for you thanks for watching
@joseleonzo18852 жыл бұрын
@@kbltexmex b gb bvvcvh aaa tea teaches a Sy5dwa5a a a
@timothyurbanski30113 жыл бұрын
Good video buddy. I figured this was my problem you just helped me confirm. Your video was the right amount of explanation. Some of these guys put videos out and just love,love,love to talk. What I like to do before I remove any wires is to take a few clear photos that I can refer back to to ensure proper replacement of color wiring. GOOD JOB Sir!
@hickerbilly1383 жыл бұрын
I got really confused at 5:10 my celenoid isn’t sparking battery good so is it the celenoid or starter
@randaloopy3 жыл бұрын
Excellent instructional video. Exactly my issue. solenoid ordered.
@RMCARRSR2 жыл бұрын
Excellent Video; Extremely Resourceful in diagnosis of my Mower !!!
@AnnesreborndollsandfunW4 жыл бұрын
Hey there ! New battlers? I need to cut my grass to but I have no ride . Just can’t aford one . Have a good week. Good to see your all safe
@michaelspliedt8523 жыл бұрын
Was able to mow my lawn yesterday before a party because of you. You saved me. Thank you! Solenoid on order and will fix shortly. Well made video. Love the mustache. haha
@jamessommer60772 жыл бұрын
Hello, Your guidance was very good as you slowly go step by step in this process which I find more informative than other videos,I have a Toro zero turn and now I know what I will do to hopefully test my solenoid if that's the problem thanks... And it was!.
@mcsmith76062 жыл бұрын
This man learned by doing and not theory. His test on solenoid was meaningless because all he did was by pass the solenoid. If the solenoid was good and the control arm switches were bad or if the PTO switch was bad a new solenoid wouldn't fix it. To test the solenoid you apply power to pole that receives the lead from the starter switch. When you disconnect a battery you disconnect the ground first, When you connect the battery you do the ground last
@jamessommer60772 жыл бұрын
@@mcsmith7606,it was a helpful video.
@zcpoling Жыл бұрын
You're a lifesaver! It ended up being both the starter and the solenoid for me 😂
@kbltexmex Жыл бұрын
Glad it worked out for you
@Ura-Onosato5 ай бұрын
Thank you for posting this "excellent" video....great job....thanks for sharing!!!👍🏼👍🏼👍🏼👏👌
@Canaan162 жыл бұрын
Thanks Sr. I just replaced the solenoid to my zer turn and it worked.
@kbltexmex2 жыл бұрын
Glad to hear that, thanks for watching
@joedrenik77603 жыл бұрын
Excellent instructional video. Thank you!
@ketchumhouse3 ай бұрын
Your video was extremely helpful, thank you!
@nevatoolate3 жыл бұрын
You made my day much easier, and much appreciation!!
@juantlopez4941 Жыл бұрын
God bless you brother good video
@kbltexmex Жыл бұрын
I appreciate it
@cliffbud23603 жыл бұрын
This sis weekly recurring problem for me .Do you know how to bypass the solenoid. ? Thanks Cliff
@chichomaddness7 ай бұрын
This was a great video and I’m glad you made it. I think the only way to make this better is if I was the main star in the video lol.
@황제농원4 жыл бұрын
Thank you for the video. I'll visit you again next time.🍀
@Badboyzfitness3 жыл бұрын
Thanks for the video you helped me fix my toro💪🏾👍🏽🙏🏽
@PhilCorley3166 ай бұрын
Thank you for the video. You solved my problem!
@kbltexmex4 ай бұрын
Thanks for watching
@justinkarcher50532 жыл бұрын
Great video. Fixing mine tomorrow!
@RidgeLife4 жыл бұрын
Great job! Love a job well done especially when done at home!
@kenLmoody3 жыл бұрын
Good video,. Question for you to start it, did you disable the seat shut-off ?
@martinebrown1342 жыл бұрын
Hi there. This is very helpful. My SS5000 has something weird. I use the mower. After using it a while the engine shut off but the starter stayed on. Then it would not turn off even when key in off position and taken out. I am not sure if it would be the solenoid or the ignition switch. Any suggestions?
@kbltexmex2 жыл бұрын
I would bet ignition switch
@familiaflores8485 Жыл бұрын
thank you so much!! your video is a blessing!
@carlmiller89002 жыл бұрын
Great job, easy to understand, Thank You.
@seedsandarrowsfrontier92244 жыл бұрын
Nice job!! I always feel a great sense of accomplishment just being able to identify the problem!
@kbltexmex2 жыл бұрын
Thank you
@austinkrohn37982 ай бұрын
I'm confused when you said if it's working nothing will happen besides sparks. Does that mean the starter itself is bad then? Correct me if I'm wrong but with the key on and the gap closed aren't you sending power to the starter either way? Causing it to turn unless faulty?
@kbltexmex2 ай бұрын
You are correct, I miss spoke.
@austinkrohn37982 ай бұрын
@kbltexmex happens! This video reaally helped me alot with my 30 year old dixon zero turn I was having the same problem with. I would have never solved my problem without your input as I am a total noobie to working on mowers in general. Subscribed to the channel. Thank you for getting back to me!
@vermontmike9800 Жыл бұрын
When you used your screwdriver to test the solenoid connection, did you have to crank the key or did touching the two do it? I ask because there wools be no way for me to test otherwise if I’m not sitting on the seats safety switch.
@kbltexmex Жыл бұрын
Just turned key to the on position
@renerodriguez41144 жыл бұрын
Thanks for the video, it saved me some money.
@MrLozano212 Жыл бұрын
What is the black box next to the solenoid? Could that be a problem for it not to crank? My mower sounds like it wants to crank but it just clicks a lot. I tried to bypass it with the screwdriver but I just hear it clicking a lot in the box.
@tiffanyloud7853 жыл бұрын
What size nut did you need since the old ones didnt fit?
@josetapaia3945 Жыл бұрын
Nice video. Thank you for sharing it.
@kbltexmex Жыл бұрын
Thanks for watching!
@jamesbailey7785Ай бұрын
Bear with me a moment; You turned key to the on position- jumping the posts should start engine. The shorter posts should be key turn to start which engages top posts. On mine more times than not it Hard click clicks and cycling the key a dozen times she fires up and runs fine till next time which it might start up the first time. My seat shows a weak ground, and machine will start with seat up, the solenoid shows good power from battery, both smaller posts show strong ground. Yet she will start up. Thoughts?
@Killedby-Monty3 жыл бұрын
So I could turn it on using a screw driver but just to turn on once I will have to replace the solenoid then thanks
@darnayspencer7617 Жыл бұрын
Do you have videos replacing the starter or safety switches?
@kbltexmex Жыл бұрын
Sorry I do not
@WolfKnifeLaserTorch82 жыл бұрын
Hey man thanks for making this video. I have a smiliar issue for my Toro SW 500 (Timecutter). I'm not the first owner but it will turn but not crank and I put a new battery in it today. Yesterday I got it to start twice and mowed a little. But it seems like dumb luck when it does. I did that solenoid test and just had a small volcano of sparks but no start. Everything was tight. You have any idea what else it might could be? I'd appreciate any insight I'd you have the time.
@kbltexmex2 жыл бұрын
Did it turn over the engine at all when you checked the solenoid? If so I would check fuel system next, fuel filter, hoses, fuel pump
@andrewgraves67782 жыл бұрын
The same thing happened to me..everything tight, battery fully charged, checked the solenoid like you did and it only sparked..engine did not act like it was trying to start at all..any ideas?
@WolfKnifeLaserTorch82 жыл бұрын
@@andrewgraves6778 for me it was more the placement of the foot pedal once my battery was fully charged.
@kbltexmex2 жыл бұрын
Maybe starter, try jumping the starter direct to see if it starts
@andrewgraves67782 жыл бұрын
I actually just bought a new battery for it..did a little research and the cca195 battery that came stock with it was pretty underpowered..I ended up getting a new battery for it with cca340 and it’s started right up every time so far..I guess we will see if that continues to be the case 🤞
@danielstaiger21352 жыл бұрын
So I was getting the click noise yesterday, but if I messed with the key I could find a sweet spot that would start up the mower, but as soon as I tried to engage the arms the engine would start cutting out. Same would happen if I engaged the PTO
@kbltexmex2 жыл бұрын
Check fuel filter and fuel system sounds like it’s being starved of fuel. It lets enough pass to start but not enough to function
@bearsneak376 ай бұрын
awesome. thanks for sharing
@chenchomartinez69332 ай бұрын
Me pasa lo mismo pero al girar la llave quema un fusible, ya llevo como 20 fusibles quemados, y este video es algo que puede ser el problema de mi zero turn
@jamessmith91542 жыл бұрын
Great video
@TheDEATECH3 жыл бұрын
Thank you very much Sir!
@dicdollars19113 жыл бұрын
Thanks man. This really helped
@Lifewithtwill3 жыл бұрын
Question my mower sparked the hydros and engine started turning when I did the screwdriver thing but never came on is it still the solenoid you think?
@kbltexmex3 жыл бұрын
It’s possible and cheap enough. I would start there but sounds like it maybe in conjunction with another problem too
@Lifewithtwill3 жыл бұрын
@@kbltexmex ok thank you will let you know how it goes
@Lifewithtwill3 жыл бұрын
Got it changed out still won’t crank 🤦🏾♂️! I got a feeling it’s something easy in my face I’m missing going to mess with it tomorrow some more if I can’t get it then to the shop it goes
@kbltexmex3 жыл бұрын
Sorry to here that. Is it turning over but just won’t start? If this is the case try starter fluid in the air intake or some sort of combustible to see if that helps.
@Lifewithtwill3 жыл бұрын
@@kbltexmex ok yeah when I turn the key I get the click that’s all won’t turn over until I did the screwdriver thing
@stopcensoringmyfreespeech32804 ай бұрын
I am pretty sure that is whats wrong with mine. I might just clean my nuts and terminals with a wire brush and it will make contact. Sometimes you can hit the solenoid with a hammer and it will start working. Thanks for the video.
@shartne3 ай бұрын
up date it was the ignition switch terminals. we unplugged them and plugged them back in it worked. Started bust off everytime.
@kbltexmex3 ай бұрын
@shartne good deal
@dennisg113483 жыл бұрын
Good Job! Thank you
@DurhamHumor3 жыл бұрын
Will you help an old veteran? Bought Titan Model # 75302 406712152 last year. From day one, when I started it, it missed a little then ran OK. It died. It will start back up & run for 4 second then run so badly you know it will dye. When I operate the coke, it makes no difference. It smokes white/blue fumes as if it is getting to much gas. What should I check 1st ? Your help will be greatly appreciated.
@garythomas37794 ай бұрын
Thank you... video was done.
@817mario2 жыл бұрын
hey man have you ever worked on a fx801v? was working fine and then just wont start anymore??
@kbltexmex2 жыл бұрын
Start with the small things first, check engine oil level sometimes they have low oil switches to prevent damaging engine. Check spark plugs they can work loose. Check fuel valve is open. Check battery. If all is good spray some starter fluid into intake and try starting
@817mario2 жыл бұрын
@@kbltexmex I had literally just replaced the oil that day. It just clicks when I turn key now. You think maybe starter ?
@kbltexmex2 жыл бұрын
Could be, I would try jumping it straight to the starter and see if it starts. If not good possibility it’s the starter
@817mario2 жыл бұрын
@@kbltexmex I jumped the battery man and it turned right on but for some reason after I turn off it will do the same thing. Battery voltage doesn’t drip tho so I dont know what’s going on. But If I jump it again starts right up
@jonaswcox3 жыл бұрын
So helpful, thanks!!!!!!
@terik12123 жыл бұрын
How did you start the mower with the seat up?
@ronknight99742 жыл бұрын
The seat switch is only for the pto on/off
@quyennguyen75173 жыл бұрын
How did you know it is not the safety switches? The tech from Toro said it could be the safety switches.
@kbltexmex3 жыл бұрын
I tested the solenoid to verify!
@LadyStrzygaDiscoversThePast4 жыл бұрын
Great job! Support and best regards from Poland :)
@austinholenchick2 жыл бұрын
So my starter solenoid sparks but will not turn the zero turn on. it does crank though. Any ideas?
@kbltexmex2 жыл бұрын
If you haven’t started it in a while and it’s turning over but won’t start make sure you choke is is half throttle. Open the intake and remove the filter then spray in some starter fluid and try starting.
@buckybritt3610Ай бұрын
How did he manage to get that lawn mower to start with the seat in emergency stop position emergency stop position. He should show that also, knowing he had to disconnect the seat switch. Just a thought
@michaelmccrimmon3 жыл бұрын
That was a great video!
@saphirediamondspearlzsdpje31274 жыл бұрын
Thank you💪❤
@barryoverson49362 жыл бұрын
Try holding the micro switches down then let them pop up hard like a car door lite switch fixed mine
@Mele19832 жыл бұрын
Gracias amigo
@truleyblessed74063 жыл бұрын
Awesome
@mbaine22 жыл бұрын
That is a bad ass mustache.
@fortrep13 жыл бұрын
Thank you, my freaking wire had came off
@mdunbar61873 жыл бұрын
why didn't you disconnect neg to the battery?
@dispatchcenter55153 жыл бұрын
As long as you disconnect either the positive or the negative you are okay. Usually people disconnect the negative first to prevent arcing. But as long as you pay attention to what you're doing you don't have to worry about it.
@Killedby-Monty3 жыл бұрын
@@dispatchcenter5515 if I just do it with a screw driver like the guy did in the video without disconnecting any positive or negative will I get shocked even tho I have a insulated screw driver ?
@kbltexmex3 жыл бұрын
@@Killedby-Monty no you will not get shocked
@troublemaker542 жыл бұрын
Can anybody tell me what’s that black box piece next to the solenoid? Mine won’t stop whining making noise even when off and my mower won’t start
@jbarrett207 Жыл бұрын
THAT DIDN'T SOUND TOO GOOD ON INITIAL START UP. SOUNDED LIKE LIKE A SLIGHTLY LOW BATTERY TO ME
@dustinboyer30113 жыл бұрын
Were can I buy one
@kbltexmex3 жыл бұрын
I bought mine at tractor supply but any local small place with small engine parts will carry them
@dispatchcenter55153 жыл бұрын
Napa sells the correct solenoid for $15.50 and it comes with nuts. Part #SME 7018601
@nelsonmoreno30743 жыл бұрын
Where are you located
@kbltexmex3 жыл бұрын
Southeast Texas
@yorttube3 ай бұрын
What if it just sparks but does not start?
@kennethreed44782 жыл бұрын
So if it's not the solenoid switch what is it
@kbltexmex2 жыл бұрын
Assuming that you already tested and ruled out the batter, I would test the starter. Hook up some jumper cables black to the battery black and red directly to the starter. Starter should try to turn over the engine.
@snakemadness45533 жыл бұрын
Bingo lol thanks big dog .
@richardhughes32542 жыл бұрын
Crossed over the solenoid mower turns over still does not crank the key switch does not work what is going on with my mower
@kbltexmex2 жыл бұрын
Try starter fluid in the intake then crank see if it will fire up
@richardhughes32542 жыл бұрын
Did the starter fluid still did not crank
@kbltexmex2 жыл бұрын
Check the battery if you haven’t already it may be worn down and not have enough juice to start the mower.
@richardhughes32542 жыл бұрын
Fully charged the motor turns over like it wonts to crank but wont fire off and run
@kbltexmex2 жыл бұрын
Make sure the unit is in park and that the key is in the on position. May have to disconnect the safety feature under the seat if you have it lifted up while working on it.
@ScottDaven2 ай бұрын
Using a Wing nut to attach the Ground strap to the Battery??? Dunno if I want to watch the rest of this or not...
@kbltexmex2 ай бұрын
Makes for easy disconnect when working on the machine. Has a lock washer to help keep it on during operation
@Thomas-hw3pb3 жыл бұрын
how much are they ????????
@kbltexmex3 жыл бұрын
It ran me about 10 bucks
@allanfarr3 жыл бұрын
My bolt or nut would fall into mower or under mower and I spend an hour trying to find it. It’s ok I’m used to shit not working for me.
@kowboylookin4love2 ай бұрын
Did everything you did... came down to a 97 cent fuse. After spending over 50 bucks
@kbltexmex2 ай бұрын
That sucks!!!
@АннаВолкова-ъ4э Жыл бұрын
we've had this about a month now and there are no complaints. kzbin.infoUgkx1VWTrayKBdCKAjzAcZ_Eg4dhHTae3LkN also recommend some of the decals are a little crooked; i guess the decal guy was having an off day. it came on a crate and took about 30 minutes to assemble, then about another 30 to install the bagger. it works great and i cannot foresee any big problems coming up. it is a sturdy, usa built product. update: the belt-drive clutch is still grabby, but i guess that is the nature of the device. as the literature advises be very careful on slopes or uneven surfaces-it can be very tippy.
@daviddrain4212 жыл бұрын
I replaced the solenoid and mine still don't start, I hear a loud noise that sounds like it's coming from the starter, the starter is good because I jumped from the battery to the starter and it turned over, so now I'm puzzled does anybody have any ideas?
@kbltexmex2 жыл бұрын
It may be a bad ignition switch, check the wires make sure there isn’t anything loose. If nothing is loose the ignition switch may be bad.
@daviddrain4212 жыл бұрын
@@kbltexmex I already replaced the ignition switch because when I went to pull the plug off and check it it fell apart and broke, the fuses at the switch are good I did a continuity check on them, I'm still looking but I think it might be something with a ground wire.
@kbltexmex2 жыл бұрын
Also make sure the wires didn’t get crossed on the solenoid. I know initially I crossed my secondary wires and would get nothing when engaging ignition.
@rueplay3 жыл бұрын
Mine still didn’t start. I even bought a new battery.
@blackhouse76462 жыл бұрын
What happened if it doesnt click
@kbltexmex2 жыл бұрын
If it doesn’t click, it could still be the solenoid, try jumping the solenoid with a screwdriver. If nothing happens check the batter and cables. Then have your starter checked.
@blackhouse76462 жыл бұрын
@@kbltexmex thanks, should i check the key switch too?
@kbltexmex2 жыл бұрын
If all else fails yes the ignition switch would be the next thing
@jz81792 жыл бұрын
I'm guessing my solenoid is good cause my lawn mower is still making a clicking noise
@kbltexmex2 жыл бұрын
Yes sounds like it, check your starter next. If you pull it off a local auto parts store can test it.
@3ngi_n33r Жыл бұрын
So what if the solenoid is good and it doesn’t crank, just clicks when you turn the key. Bad starter maybe?
@kbltexmex Жыл бұрын
Then try putting power directly to the starter and see if it turns over
@kbltexmex Жыл бұрын
If nothing happens then get your starter check at a local auto store they can tell you if it’s good or bad.
@kbltexmex Жыл бұрын
If starter checks out good it could be your ignition is bad or a loose wire from the ignition to the solenoid
@3ngi_n33r Жыл бұрын
@@kbltexmex thank you 👍
@southernstyle86364 жыл бұрын
I change my solenoid and mine still didn’t start
@kbltexmex4 жыл бұрын
Sorry to here that, next line of business will be to check you battery make sure it is holding charge, then check the wires sometimes they get crossed, then next would be to check the starter.
@michealguesshe96553 жыл бұрын
Same problem i put a new battery new solinoid and new ignition still only clicks but i can bypass solinoid and starts right up
@sherrischneider27942 жыл бұрын
You need to go get the right solenoid. Your fittings are all wrong
@royj9241 Жыл бұрын
When I touch both with screwdriver it doesn't do anything
@kbltexmex Жыл бұрын
Make sure the key is in the on position, if still nothing I would check your battery and wires.
@bergsy5 ай бұрын
hey pal i cant help but notice you literally have the wrong part and forced the connections breaking the metal crimp in the process... my twitch viewers will be hearing about this. (i left a dislike) please use the correct size parts in the future.