TOTS Halloween Kills Michael Myers Mask Rehaul

[@GabrielPingel]

The reason I love your rehaul videos and other peoples' rehauls too, like Cosplay Chris, is because you guys don't look at the paint job as much as you praise the excellent sculpt. Great job!

[@basicyoutubeaccount8230]

I’m flabbergasted at how amazing your masks are, they are truly great 👍

[@MichaelAudreyMyers]

It looks insane! One thing I will say is I think you made the burn almost not dark enough. Needs a little more yellow and black but other than that this is amazing work.

[@edgarmartinez2040]

Felicidades !!! Es bueno el trabajo que hiciste, revisé otros videos y tu método es cuidadoso y profesional , compre las máscaras y voy a trabajarlas siguiendo tus consejos Gracias!!!

[@MigMonkey]

Very nice work! My rehaul definitely came out more "two faced" like you said, but I'm happy. As for yours, you mentioned redoing it in so many layers, that is a good thing honestly. Layers make it feel real. Push the color, pull it back, push it again, pull it back again.. I think you nailed it. I wish I'd dremelled my eyes now though.

[@s00perproject84]

Thank you so much!! Yeah, I think in the long run, it definitely adds that extra depth. Just need to control my layers and be a little bit more deliberate in the future.

[@jayquadd]

Dude I rehauled my own from the costume mask that came with the coveralls. Yours makes me wanna repaint mine a 3rd time.

[@s00perproject84]

Honestly, just gotta go for it and keep trying!

[@abettertomorrow2945]

Looks badass! For the wash I've found that using F.W acrylic ink mixed with 70% rubbing alcohol works better than acrylic paint/water for getting into all of the little cracks and crevices. Distortions Unlimited has a great video on how the process works. I also recommend the night shades rubber mask paint. It can be a bit pricey but def worth it if you plan on doing more rehauls in the future.

[@s00perproject84]

Thank you! I think using the ink technique will be my nest move, as I've seen that recommended quite a bit. I've also thought about stepping up the quality of the paints just to make all the work even more worth it. Appreciator the suggestions!

[@Trickyin4k]

Overall, the mass turned out really well. You did a really good job. If you ever decide to go back and do more work on it I would crisp the Burnside of the face a little more not too much obviously.

[@leonvinson7221]

It looks so cool. I feel like the burn side should look more black than white but that’s just my opinion

[@mikemyers2626]

Great job

[@figboss1836]

You should do the ‘78 mask. You would do a awesome job on it.

[@coledubois6669]

Do an ink rub out instead of a wash you take black ink and 70% isopropyl alcohol and run it through an air brush and then you take a sponge with the alcohol and remove the ink from the places that you don’t want it or to tone it down. Highly recommend watching Nightmare Toys rehual of this mask

[@s00perproject84]

Yup, watched their video and I will try that next time!

[@springtrapxD]

Perfect

[@the-experiment]

I think the mask is amazing except that the burns don’t really look very crispy so maybe dry brush some more black on the burn side

[@T80DMC12]

Looks cool but it seems like it did not burned anything

[@majinbehr]

What method you using for dry brushing ?

[@daquariuscanady9203]

Dude You Are The Goat💯💯💯💯 You Make The Ones Before Look Like Shit…. You Need A A Store Man💯 Great Video And Mask Man 💯🔥 Yours Look Way More Scarier And Just Feel Way More Demonish 😂😂💯💯💯💯

[@Insanity-g9t]

I love it good job 🔥🔪🎃 🖤🤘

[@s00perproject84]

Thank you!

[@TitoChowden]

Great looking mask, the only thing is that the burned side isn't as crispy as I'd do it, but in no way is that to say it looks bad.

[@s00perproject84]

I appreciate it. If I could go back, I'd definitely do a more burnt look on the Kills. I was kind of scared going overboard and I ended up not doing enough haha.

[@TitoChowden]

@@s00perproject84 yeah when I rehauled mine, the burned side was a little too dark and a little flat but I took some creative freedom and used blood mix I used for the wound and just added in small splats with a fine brush and just blended it in with my finger to make it look dried and almost brown. Idk if that makes any sense tho lol

[@myers2000]

Excellent work bro, where did you get the hair?

[@s00perproject84]

Thank you! I got the hair off Etsy, but its no longer available from that same seller. If you look up "camel hair", you will find some other good results though. Usually more than enough is sold to do several masks.

[@10HALLOWEEN31]

Laquar thinner is better than the Naptha from my experience

[@s00perproject84]

I'll definitely have to experiment with that as well.

[@brutalityarts7679]

Awesome job! I'd reccomend next time going for an off white base coat, then white🤘

[@s00perproject84]

Thank you! I actually experimented with that in some tests, but I think I will fully commit to that next time!

[@golumhair]

i love it!!!

[@s00perproject84]

Thank you!

[@TheGraveDiggersWorkshop]

This is a great looking rehaul..What yellow did you use foe the highlights on the nose,etc..?

[@s00perproject84]

I actually used a lot of random yellows that came in this set, but I would also go back to raw sienna and a little bit of "lemon" as well.

[@alejandroviruete9072]

How much $ do offer to rehaul my Michael myers 2018 mask ???

[@jaxonv2098]

What kind of paint do you use? I keep getting latex balls in mine

[@INFAMOUSL1M1TZ_TL]

Is air brushing necessary when it comes to rehauling the mask??

[@5k.n1ght]

No, you can mix acrylic paint with liquid latex and some water so that the paint is flexible and doesn't crack

[@thatillestbori1]

Man do you sell these bad boys I’d love to buy one of off you I already own two Freddy mask by james updegraph and a part one Myers mask

[@GM-wm5ev]

awesome

[@s00perproject84]

Thanks!

[@elliottdeiters4630]

that is so cool

[@s00perproject84]

Appreciate it!

[@elliottdeiters4630]

@@s00perproject84 your welcome man

[@mrsavage9208]

I wanna buy h40

[@midnightmyers3873]

What was the ratio u used, for the base coat?

[@s00perproject84]

I generally went with 1 part distilled water, 1 part liquid latex, and 1 part acrylic paint. The paint wasn't super fancy either. This will give you good flexibility and opacity.

[@logangreene7269]

"Hey, S00per Project. My name is Michael Monroe and I'm a big fan of your KZbin channel, and I was wondering if you would like to hear about a interesting topic that I have for you, if you would like to hear about it?"

[@kremestation80]

May I ask where you got the hair?

[@s00perproject84]

This is where I got mine. It's kinda pricey, even for the lowest quantity, but it's solid stuff. Perfect match for the TOTs hair too if you don't want to do a full rehair. www.etsy.com/listing/909333795/adult-camel-hair-roving-michael-meyers

[@dexterreyes9960]

@@s00perproject84 its not available anymore. Any substitutes?

[@jeffsantos3594]

What hair do you use for rehairng?