Touching off tools on a Citizen A20

[@Romenite]

Great how to , I ran a Citizen L20 and a L25 about 12 years ago and will be starting a new job here in a couple weeks and found this very helpful .Thank you

[@GH-bm3hy]

I work also on A20, it's incredibly stable, it's amazing how you could start it and turn your back and just go.. i could rate this mashine on 7 stars because the work it does..hello from Germany 👋

[@arnousallc7370]

Very nice walk-through of the tool setting process. Very helpful for our team as our ARNO Fast Change system becomes more popular. Great video!

[@BecomingOffgrid]

Doesn't he work at Titan's shop now?

[@donniehinske]

I do it’s crazy to look back on an old video I made on a weekend and see someone comment this!

[@kennedy750]

Yea it's dope

[@oscarrico8931]

Thanks! Really i apply that information in mi job. You should do more videos from A20 lathe.

[@frankcruz1751]

Great video. I love it! Thank you for sharing this information.

[@francysvarona3567]

He came a long way To titans of cnc

[@donniehinske]

Thank you! It’s been an insane journey for me

[@rekcarK]

After adjusting the core on T1 you don't feel it is necessary to reset the Dia?

[@ameensn2846]

Thanks a lot!!! Lets say the machine stopped and i want to left the tools that facing the stoke how can i do that? Go to prepration and what?

[@devinebert6645]

Go to manual(handle) move z out a bit, go to prepare, hit cutoff and st position then coolant, when you see hnd ****, hold down cutoff and hit the start button

[@SquidIndustriesco]

Hey Donny, great video. Do you think you'd be able to record a video on switching over to chucker mode (guide bushingless mode)?

[@antarjyamigouda8258]

Plz upload more videos on this machine

[@ByteCubeTech]

Can you please tell me the ptogram editing procedure on citizen swiss lathe

[@briangoodie3420]

How would you compare this machine to M20 or L20?

[@mohamedosman9272]

Thanks a lot for sharing knowledge.

[@VishnuOruganti]

When i tried to run G71 Cycle . It's not working showing error .. improper use of g code.... sry for my bad english.. pls hlp me

[@t6nu69EST]

Very good video! Thank you!

[@s.janakiammamusicparadise6137]

Pls share full setting video

[@Sagittarius_bhupinder]

Wow Titans of CNC

[@donniehinske]

lol nah. My old job in MI

[@jamessellers3417]

Need to do some L32 vids

[@DJ-fk3gq]

Great video ... Plz show the video how to adjust guide Bush and collet pressure for both the spindle Thank u

[@dynamicmachineuniversity2318]

kzbin.info/www/bejne/g6qrp2eGqsljhK8

[@suryavanshisunil9364]

Hi IAM citizen operator please call me at this number 8962383113

[@dennesmmarrerocolon7308]

How I can set up knurling tool in #4 (T4) ?

[@dynamicmachineuniversity2318]

We will be doing a video on that ASAP. thanks for the idea!

[@s.janakiammamusicparadise6137]

Sir,any indian distributor here in Coimbatore?

[@Mysteryableful]

How do i convert tool dimension to standart? Any formula?

[@khali7519]

thanks for the lesson friend.

[@PetesShredder]

Is it not possible to probe these tools somehow? This seems like a lot of effort compared to a “normal” lathe with a tool setter

[@dynamicmachineuniversity2318]

There are so many different types of tool stations that can be applied to the citizen machines with so many different stick out lengths. To make a probing system like a normal lathe would be very expensive because several would be needed for the different tool types for each spindle. Believe me I have thought that for years now for setting these things up

[@PetesShredder]

@@dynamicmachineuniversity2318 youd think they could make a thing that goes in the spindle with a tool setter sticking out where the stock would be

[@dynamicmachineuniversity2318]

@@PetesShredder That could maybe work but there are a ton of different holders and options that go in these swiss machines that would make it hard and not cost effective to do. Once you practice it a few times its not so bad.

[@PetesShredder]

@@dynamicmachineuniversity2318 yeah and you would have to get it straight and level too. I’m imagining a bit of ground diameter with a four pad tool setter sticking out the end like our mazaks have

[@dynamicmachineuniversity2318]

@@PetesShredder That would be sweet

[@brandons9138]

I feel sorry for anyone using a FANUC control on a Citizen machine. We have 14 Citizen machines at my shop from 12MM to 32MM. Some are A machines some are L machines. We have ONE that has a FANUC control, the rest use Citizen Cincom controls. The Cincom makes it SO MUCH easier to set up a machine VS the FANUC.

[@nbowling10trio]

Agreed, I ran one with citizen control for about a month one time making bone screws. Citizen control was almost like a conversational control, very intuitive. The fanuc looks older and basic like an old star lathe.

[@nasircnc767]

I am new operater in cincom A20 So please help me in offset

[@mangeshsarade9283]

It help me .. Sir please make videos on how to take centre of all working tools, programming, c axis and indexing, how much degree is given according to material during Chuck pressure etc. Please sir I m waiting for positive response....... Thanks.

[@dynamicmachineuniversity2318]

Video coming soon. Thanks for the idea!

[@diveshwadhwa9777]

Which one is better citizen A 20 or tsugami B 205

[@Shilohfan69]

More please😀

[@Mr1bassman1]

I was just wondering how many people had bought a machine like this, but we're unable to use it until they found this video?

[@jamesg8246]

People who are experienced in running these don't watch KZbin videos to know how to use it. It's a niche artform much like extrusions.

[@pandilleros1]

Más videos de citizen a20

[@adnansikandar2332]

Good job, I am getting Alarm number 2007 although all doors close. Can anyone help?

[@dynamicmachineuniversity2318]

What model Citizen? is it an A20? If so is it an A2-20 or an A3-20?

[@zibim3017]

Super.. THX

[@frankcruz1751]

Is the L20 same as A20?

[@slickboyd]

Only difference is, you can produce longer parts on an L20.

[@tonyfrancis8465]

If you follow these instructions you never will be set up guy

[@12ozElephant]

This guy works for Titans of CNC now lol

[@Ánhlamthue]

CNC prongram

[@Michal_Sobierajski]

Convert to the standard 😂😂😂

[@MoonInPisces1962]

This is not how experienced professionals setup a citizen swiss machine.

[@firecatsrt]

yes, there are several short cuts from what is shown.

[@ByteCubeTech]

Where can i find the professional method for setup citizen swiss lathe?

[@RajeshSingh-nz8zx]

Language hindi