Toursor X13 Parameter Settings (MAO1 DAMAO Display)

In Todays video we look at all the settings that the X13 has to offer!
Link for the settings is down below (THIS IS ONLY FOR THE DISPLAY SHOWN)
MAO1 DAMAO Settings: docs.google.com/document/d/1NCXOr3Z2cchqfuhpMSoqIFacPrrkSZfZlcULD4ORZhQ/edit?usp=sharing
Our Links: JNStudioss
NoahLax99
www.twitch.tv/noahlax99
www.twitch.tv/jn_productions

[@JMProductions669]

QUICK PSA I JUST REALIZED MONTHS LATER I SKIPPED PARAMETER 12 😂😂😂😂. I'll quickly explain that P12 is the start intensity from 0-5. 0 being an easy start and not much torque when you first hit the throttle. To 5 being having your front tires burn out and having the scooter in beast mode pretty much. If I'm correct mines set to 3 so it's in the middle!

[@apank21]

skipped 5 also ?

[@halobaby48]

Awesome detail/useful video!

[@mikepudlik625]

Voice smooth as milk and honey, great video Johnny. Keep it up.

[@JMProductions669]

IS THIS WHO I THINK IT IS? If so good to hear from you again. Hows life been treating ya!

[@billfranks6805]

Thanks for this video I now have a greater understanding of my toursor x13 display you've explained it much greater detail than the instruction manual did but wears your big coulor display in the middle of your scooter cockpit gone???

[@denkorea]

Don't change Speed Limit settings. I changed it to 50 cause I felt the scooter was too fast - ended up burning both motors. KEEP IT 100!!!!!!!!!!!

[@franzdemesa5663]

Thank you for this review! I just got my X13 and I want to ask if this happens to you as well. Gears 1 2 and 3 doesn't seem to make any difference. Eco and turbo doesn't seem to make a difference as well. Single and dual is the only thing that works and man it is so violent. Not for beginners. Does your regen brake work? Because I set it to 3 and it doesn't seem to have any difference with 0. I set P12 to 0 but it still start really violent.

[@elkuqo1972]

Thanks bro

[@user-lb5sv2fh8p]

спасибо тебе добрый человек!

[@chrisl4651]

I had a question for your Toursor x13 parameter video I wanted to know why you skip parameter 5 assisted gear position I know it says 0 to 3 gear mode would that increase acceleration?

[@aaronfrye216]

so i have a 72v xtron 11 inch tires , so the dont touch parameters any idea what i should put them at, should change tire size to 11.

[@Sumeriox31Eirikr]

Hello, I bought a diaplay damao, which works between 48v to 60v but when I connect my 48v battery it appears almost discharged as if the display detects that it is 60v and not 48v, how do I configure it so that it detects that it is 48v and not 60v

[@antonypartali]

This display match with all controllers??

[@garricksviridoff]

Good afternoon. I have such a question for you: how to connect the Damao Mao1 -5 pin display to the controller of my scooter, to Damao Mao1- 6pin. Thank you.

[@trtertretererterterter510]

I received this damao mao1 and dual motor controllers in the mail a few days ago it took me a day to get installed I needed the Ali express vendors help but they helped me after a days wait. I wanted to ask you about your cruise control mode I noticed with mine when I turn it on and activate it the rear wheel spins in cruise and the front wheel stops does yours do that I was thinking maybe I wired it wrong or maybe cruise mode is ment to do that not sure could you raise your scooter of the ground and check for me please. I haven't been able to find any one in the else in the world with the damao display. it is a cool lcd mine has green back lit display. I also installed a green volt meter/key ignition.

[@JMProductions669]

Hello there I saw your other message and I was meaning to ask if you ever the scooter to operate again. Cause you mentioned the motor and throttle weren't working. Cruise control for me had both wheels spinning. However I do use it so I deactivated it. I've had one subscriber tell me that when I'm cruise control it just slowly continues to accelerate. So perhaps it could be a wiring issue but not sure since there are different responses from other people with the same scooter. And why would you install a green voltage/key ignition. Didn't the scooter come with that?

[@trtertretererterterter510]

J&N Productions no my scooter was the most cheapest lowest end clone available the akez dual 1000w which means no extras or anything fancy. it had a different lcd different dual controllers and no key ingiton. I added the keyignition first then eventually swapped dual controllers and new lcd together. I see in reguards to cruise mode and both wheel spinning I must have done something wrong possibly a wrong wiring order not sure the wheels work fine though and the 3 gears are working and brakes detected. I might just leave the cruise mode off since both wheels spin when using the throttle just not when cruise activates. do you have any switches for your controller to adjust e brake or eco mode. I don't think eco mode is working now with the new 3 gears that it's using. my. previous controllers didn't have the gears working but the eco. mode button worked which was a handy press. i didn't see any regen braking settings or plugs that sucks I would like that but I think the low brake works by pressing the brake levers just when regular driving. it feels like when I brake it stops way quicker. it would be nice if there wa smother people with this lcd in the Facebook and reddit scooter groups. I'm the only one. so that's why I am coming to you for what info you have learns about it. the seller of it is very vague with everything and takes about a week to respond back which is a pain. I'm waiting for there response for the same questions I asked you. sometimes they still don't understand what I'm saying because they don't speak English an probably google translate everything

[@FranciscoJSalo]

Do you know how I can buy toursor x13 In ue?

[@hugosanchez1615]

How about P12 ?

[@bigbrad9976]

Hey finally got my scooter it took 70 days only because FedEx held it in due to no workers to unload the trailers and I was pissed but I'm happy it's here finally

[@JMProductions669]

Awesome to hear. Yeah mine took 60 days and I thought that was bad. Do let me know how your scooter runs when you finally get it going!

[@bigbrad9976]

@@JMProductions669 thanks bro I got the big monitor also

[@bigbrad9976]

@@JMProductions669 oh yea the scooter runs excellent and the sellers are great had an issue where I burned out my light control and they sent me another one but still not the issue my light stays on unless I turn off the scooter do you have an idea what it can be?

[@trtertretererterterter510]

@@bigbrad9976 if ur light stays on and only turns of when the scooter is off it means ur lights wired to power lol and not wired to the switch

[@trtertretererterterter510]

@@bigbrad9976 if it was hooked up to the working switch the switch will allways cut the power and the switch is the first one fed the power and then off the switch negative would go the light positive. maybe u don't understand electronics to well yet I am starting to get a better grip of it my self

[@trtertretererterterter510]

do you know what the charging plug icon in the bottom left corner is. it has a spanner inside the plug icon.

[@trtertretererterterter510]

I'm thinking it's maybe regen active on the battery but I have p18 turned of I think.

[@ja054]

P16 is the odometer. But you can't change it I think.

[@barnboy3168]

Yes P16 is the ODO. Press and hold the Mode button and it will clear…..

[@user-hx2io6mc7d]

Do you know what the small M mark on the right side of the display means?

[@viktorpirishanchin1786]

I have the same question and can't find any information 😅

[@redzkamote1268]

Btw man what does the icon that looks like a bolt mean?

[@MrPlasma01]

it means your a nut.

[@barnboy3168]

Here is a handy tip, especially with the large value parameters like speed limit. In the lower left is an “A” looking character. If you press and hold POWER and it will change to a “d”. So “A” advances the parameter with each MODE press, where “d” decrements the parameter with each MODE press. I can’t get my little display to show speed, current, ODO, trip (shows voltage and Mode#) and the big display doesn’t show ECO/Turbo, Single/Dual, nor MODE status. The speed it shows it totally bogus. Any clue WTF is wrong with my Beastie???

[@r3qu13m]

Ahhh thank you so much, I stumbled upon it and really wanted to know what the a or d meant. Was afraid to mess up my settings.

[@yohvh]

you could turn up the amps no problem. make some more power.

[@yohvh]

Wow it's so slow. I've got this one and the P12 setting is in 5. But it's extremely slow acceleration

[@bigbrad9976]

Hey the P2 kmh to mph doesn't work did you ever get it to work?

[@JMProductions669]

So yours doesn't work either? Cause I've tried numerous times and it just won't switch over. All the other settings work just fine for the display though so it's weird

[@bigbrad9976]

@@JMProductions669 nope I contacted my seller they tried to walk me through it but it seems to work on other monitors except this one smh and I have the big monitor as well that it works with.

[@Phoenix3astman]

@@JMProductions669 Hey my scooter finally came at long last, I got it last week Monday and I'm so happy with it. Not sure if you remember me from comments on your previous videos but anyway I have good news. I managed to change mine to mph but mine is the Realmax version of your scooter, so maybe you need to go to P3 on your one and try what I did on P4. I've posted the steps below so let me know how you get on. Press the power and the mode button at the same time. Then you press the mode button to change the display to P4 or P3 on your scooter. Now press the power button to enter P4(P3) and you will get a 0 value flashing at the bottom on the right. Press the mode button again to change the value from 0 to 1 and that will change it from kmh to mph. You're welcome!😬

[@Phoenix3astman]

@@bigbrad9976 Hey did you guys try it? Let me know if it works for you guys or not. I must say I love this scooter and the fact its a head turner makes me appreciate it even more. Everyone out here in the UK rocking the same scooter then there me and this beast. I got a gps tracker with mine but they forgot to give me the damn details for it so I had to open up the board and try and look it up. It started flashing then sparked 🤦🏿‍♂️ Just tole them to refund me for that. Any suggestions for a good tracker guy?

[@bigbrad9976]

@@Phoenix3astman oh wow that great yes we both have the realmax version checkout my KZbin channel and you will see mines but no I'm going to try it now thanks alot. And congrats in finally getting your baby

[@trtertretererterterter510]

i bought this and couldnt get it working with my old or new controllers. the old controller i could get it to power on but no throttle. and with new controllers nothing turns on. what a waste of money and the seller dont reply anymore. i got the parameters and supposed wire codes but still no luck with both controllers.

[@bigbrad9976]

You have 30 days to report defective stuff to Alibaba

[@trtertretererterterter510]

@@bigbrad9976 it's all good I got it working a few days after owning it. the seller finally replied and helped. everything has been working for a month now or so. I get a little charging plug icon in the bottom left corner when I stop accelerating and free spin. I wonder what it is.

[@bluejeans725]

@@trtertretererterterter510 could the e-abs (regen) kicking in.

[@crazyemparis4669]

P 12?

[@JMProductions669]

Huh I just realized that I skipped P12 😂😂😂 my bad. Anyways P12 is start intensity from 0-5. So this will change how much torque you will have the initial hit of the throttle. So 0 being just starting off easy and 5 being burning out the tires probably. If I'm correct mines at 3.

[@lochlocrateorganiquesansadn707]

Hé ! salut ! Un peu feignasse de pas laisser le lien chinois ...

[@stefanbuurman1708]

You speak to much

[@garricksviridoff]

Good afternoon. I have such a question for you: how to connect the Damao Mao1 -5 pin display to the controller of my scooter, to Damao Mao1- 6pin. Thank you.