Toyota 100 Series Land Cruiser | Center Diff Lock Switch DIY

[@Being_Joe]

Plan on swapping out this switch to address another issue. Went to go take a look before the switch and wrench come it and boy is that a tight spot. Thanks for the video, will come in handy.

[@KRTLyfe]

Thanks for sharing

[@gourmet53]

You did a great job showing how to change the switch. Very difficult place to film and work. Don't have this problem yet........but thank you for the great help video.

[@born2truck]

Great video! Just did it myself and fixed the issue on a 2000 lx470. One important thing that you didn’t mention is that there is THREE sensors like that in the transfer case (one for neutral, one for low range and one for the diff lock). I accidentally started with the neutral one and realized it was wrong just because the connector is slightly different and wouldn’t fit the sensor. Now, the neutral and low range one are in the back of the transfer case (and easily accessible). The one that fixes the telltale issue is unfortunately the most difficult to reach and it’s in the upper front of the transfer case. You have to access it between the right catalytic converter and the front drive shaft. The most challenging part of this job is finding a way to move the 27mm wrench around in that tight space. It’s a great feeling seeing that light pop up after spending 1 hour under the car :)

[@KRTLyfe]

Thank you I am glad you found the video helpful. All the things you mention are very valid points. Hopefully anyone else attempting this DIY will also find your input useful.

[@mathiasgomez3923]

Love it! Just bought one and was wondering how to fix it. Absolutely great video. Thank you!

[@KRTLyfe]

Glad it helped! Hope you get it sorted out soon.

[@swiftone1]

Thanks for the vid, I was starting to lose it but this vid solved the issue.

[@KRTLyfe]

Glad it helped and you found it useful! Thankfully its a pretty easy fix!

[@cameronkremp9825]

Thanks! Helpful and sense of humour

[@CharlesDeMar]

Good to know! Thanks for sharing!

[@KRTLyfe]

You are welcome.

[@omeryldz3048]

Thank you so much

[@KRTLyfe]

You're most welcome!

[@johnrosales4220]

Hi Thank you for the video, I think I have a similar problem but mine wont disappear the light on the dashboard cnter diff lock and the active trac in engage. What do you think is the problem? Is this backup switch compatible with LC 100 series yr 2000? Thank you

[@KRTLyfe]

I would triple check on IH8MUD for a decisive answer.

[@TOYOTA.Overland]

270k miles on clock and I never seen this issue. Problem is sometimes with REAR diff, this electric engine and corrosion, but center is ok.

[@KRTLyfe]

Yeah when I found that we had an issue I went on Mud and saw a few posts from others with the same issue.

[@thomaspham8852]

anyone know if the becks part on amazon fits the 1998 Lx470?

[@nickmorgan6893]

Do you feel that the 2005 cruiser is more refined and more powerful than the 1999 cruiser?

[@elbayawak]

Same question

[@KRTLyfe]

No, it definitely feels very different tho. The best way i can describe it is the 2005 feels like a GX470 and the 1999 feels closer to a 80 series.

[@nhiavang3299]

Vvti model will be more powerful

[@mhrvgarage]

Because the 5speed gearbox

[@lawnmower11]

Agreed, main difference is the 5 Speed transmission vs the older 4 speed

[@Moondoggy1941]

My wife was driving my GX 470 to the local store last night, when she was at the light she wanted to adjust the mirrors will our Locking Center Diff button is right next to it, will she pushed that, she stated it was very difficult to park the SUV, and I tried and it was steering very strange, the light was blinking on, s we left the ride, what can we do to fix it or correct it? I have never gone off road with a SUV.

[@KRTLyfe]

From what you described, all you need to do is turn off the Center Diff lock. It should be as easy as pressing the button again and driving the vehicle. The Diff should disengage fairly quick after it has been placed in the off position and driven a few feet or so.

[@redrover2k]

Looking for a little help. I live in Zambia and have a 2005 100 Series. The CDL is not working. Currently, when you press the button or engage 4LO, the Rear Diff Lock light comes on! There is no Rear Locker! Do you think this switch could resolve the issue? Or do you have other thoughts? Thanks for any ideas.

[@KRTLyfe]

That is interesting, I’m not 100 percent sure but being that you are in a different market your 100 could have slightly different specs. It’s hard to call on that one. I would say search around ih8mud and see if you can find any leads there. You could also try doing some figure 8s in the dirt to make the lockers engage.

[@hernancornejo7538]

Do you have the sku ?

[@demolitionman3991]

My LC 2001 100 series has gon into centre diff lock and light is on. My problem is it won’t go off. The rest of the switches on the same panel don’t seem to work. Do you have any ideas what this would be . Thanks

[@KRTLyfe]

Have you tried doing a figure eight in gravel? Typically from what I,ve read on IH8MUD this will unstick stuck diffs.

[@demolitionman3991]

@@KRTLyfe I have tried that a couple of times . I’ve now sent in the switch panel to an electrical repair shop as some of the switches are not working and hoping this is the problem , thanks I will post the results when I get them in a couple of days

[@adventureswithsteve4278]

I’m looking at buying a 2002 with a 120,000 miles on it. What should I look for ? It has height control and diff locker Can I put a 2 inch lift on it?

[@KRTLyfe]

Wow, that is really low mileage! Don’t look a gift horse in the mouth! I’ve seen people do all types of suspension set ups with the 100. If you do a lift you will have to delete the height control FYI (the entire system). You can find a lot more useful information on IH8MUD. Thanks for watching commenting and subscribing!

[@adventureswithsteve4278]

@@KRTLyfe thank you so much 😊

[@g_unit6773]

👍🇺🇸👊

[@KRTLyfe]

Thanks!

[@Zamai]

1:55 Слава Україні :)))