TOYOTA 3.4 SWAP | ENGINE PREP, CLEAN & TOS BATTERY MOUNT

3.4 GUIDE PDF DOWNLOAD LINK: drive.google.com/file/d/1LJRp...
INJECTOR MASTERSLLC: injectormasters.com
[phone]
9220 Southeast Tolbert Street, Clackamas, Oregon 97015, United States
3.4 VLOG PLAYLIST: • Toyota 3.4 Swap
AISIN TIMING KIT - amzn.to/2PlqoIv
AISIN 3.4 CLUTCH KIT- amzn.to/32RMMfr
FAN PULLEY BRACKET- amzn.to/3tULo7S
LUK FLYWHEEL- amzn.to/3sKiWUJ
OIL UNION- amzn.to/3aBQyy1
FLOWMASTER MUFFLER- amzn.to/3xnxKw7
INTAKE MANIFOLD GASKET- amzn.to/3tKpMuR
NGK SPARK PLUG WIRES- amzn.to/3et6gg2
PCV OEM - amzn.to/2QvGGij
FRONT MAIN SEAL- amzn.to/3esdnVT
O2 SENSOR GASKET - amzn.to/3dOtcaj
BEST LEAD HEADLIGHTS- amzn.to/3sMFt3u
3.4 ENGINE REMOVAL :
• Toyota 3.4 Swap | VLOG...
3.4 TUNE-UP LIST: • Toyota 3.4 Swap | VLOG...
3.4 TUNE-UP PARTS: • Toyota 3.4 Swap | VLOG...
3.4 FUEL LINE & OIL PAN: • Toyota 3.4 Swap | VLOG...
3.4 CROSS-OVER MODIFY: • Toyota 3.4 Swap | VLOG...
3.4 ISR MOD & DIP STICK: • Toyota 3.4 Swap | VLOG...
3.4 OIL COOLER DELETE: • Toyota 3.4 Swap | VLOG...
3.4 SWAP PRICE & HOW MUCH IS COST? : • Toyota 3.4 Swap | VLOG...
HOW TO REMOVE PILOT BEARING EASY & CHEAP: • EASIEST AND CHEAPEST W...
3.4 FUEL INJECTORS: • Toyota 3.4 Swap | VLOG...
TOY ONLY SWAP WIRING ADAPTER: • Toyota 3.4 Swap | VLOG...
3.4 CLUTCH & FAN SETUP: • Toyota 3.4 Swap | VLOG...
3.4 SWAP FIRST DAY: • Toyota 3.4 Swap | VLOG...
TACH MOD & MINOR TWEAKS: • Toyota 3.4 Swap | VLOG...
INSTAGRAM: @NUTTYNU_4X4
DISCLAIMER: TO BE USED AS A GUIDE ONLY & FOR ENTERTAINMENT PURPOSES.
NOT LIABLE FOR ANY DAMAGE OR MIS GUIDANCE.
Business Inquires only | [e-mail]
Instagram @NuttyNu & @NuttyNu_4x4
Support the channel
Donate - CashApp- @ $Nuttynu
PayPal- @ [e-mail]
Copyright 2011-2023
NuttyNu Media
No reproduction/ re-upload of any content footage without written consent from me.
The story, all names, characters, and incidents portrayed in this production are fictitious. Any similarity to an actual person, living or dead, is purely coincidental.
No identification with actual persons, places, buildings, and products is intended or should be inferred.

[@stevet8121]

Thank you for taking time and effort to show us all this. I think it's pretty cool.

[@mattstarr8203]

you're very knowledgeable on Toyota

[@NuttyNu]

Learning everyday

[@SOLDADITO76]

When I did my 3.4 conversion I used nut-zerts to hold things down in the engine bay. Plus any time I do things on Toyota's at junk yards or at home I save all my hardware, so I have Toyota hardware from small fine thread screws to large nuts and bolts in numerous ammo cans. I Pulled a battery tray out of a wrecked Tacoma and welded it into my rig since it will never be removed. You can relocate your oil filter to the rear of the block using your cooler delete if oil filter clearance is an issue. You just need a large allen to remove and reinstall the all thread for the filter. Doing this will make it easier to get to the oil filter from the bottom an help minimize the mess you make. Rear sump oil pan and pickup tube from a 95-04 Tacoma 3.4l 2WD will bolt right in as well.

[@NuttyNu]

Yes!

[@auroralance8546]

You can run the hose off your hot water tank. Then you can pressure wash with hot water.

[@bobbq9290]

Smashing the like button just for you

[@TrapperScottyAlaskan]

I like the 3.0 pick up tube

[@dennisgallear409]

fun times

[@JoelMMcKinney]

Yessssss! 🎉

[@LeviPeters.]

Got me looking on marketplace for a project 🙄

[@detectoraid5985]

My TOS battery tray came with hardware, the M8 was taped in the hole.

[@NuttyNu]

Interesting

[@JoseLopez-ep9jl]

I need do the same swap 👍

[@NuttyNu]

Do it, don’t procrastinate

[@LeviPeters.]

Whats the truck gonna be used for when you get done?

[@NuttyNu]

Mall crawler