Toyota Avensis 2003 - 2009 radio removal guide inc steering controls

--If this video helps in any way please click 'Like'--
Video is kept as short as possible while covering easy radio removal and how to fit the steering controls.
Part numbers for fascia,steering interface are included in the video.
I am in no way held responsible for any Injury, damage of faults that arise from following this video. If unsure seek professional advice.

[@hughjanus3235]

Thanks.....just bought a single DIN stereo and a single DIN cubby tray for the Avensis.....this video saved me from the inevitable mangling of the fascia and dash pads....cheers.

[@tombjorkfors]

Thanks a million for this video! It helped me today when I wanted to check the reason for very poor and mostly non-existent sound. If any sound, then from one of the four speakers only. I wanted to see if I would find any visible loose connections, which I didn't. However, after disconnecting all plugs and cleaning them (fine sandpaper slip on a tiny stick) , including all sockets, the sound is now perfect from all speakers. I was prepared to take the next step and aquire another unit, but luckily I didn't have to. I would never have had a clue where to begin, if it weren't for your video, so THANK YOU!!! I encourage everybody to check and clean all connections before disposing of a unit which is not performing. Greetings from Pargas, Finland

[@Nav.K_]

Very clear and concise video. However the end is a bit abrupt. It would have been nice to see you put it all back and display the working with the new fasia but thanks

[@grilsegrils9330]

Very useful guide. My car is going to the junk yard because it's not safe on the road anymore. But there is a LCD type DAB-radio I don't want to give away to the "money makers" at the recycling place. I will get some money for the car anyway, and find it a hassle to sell it for hardly any more than what the scavengers normally offers you. Having a sick family member and that adds to the unwillingness to advertise the car as a junk project

[@project3430]

Thanks for posting this - I have just changed my CD player - this was really invaluable, would’ve ended in disaster without the hints and tips - really appreciate this help 😊

[@MrDavestarr2001]

Where is the rest of the video :( great video but stops at the point of fitting the the new stereo into the cage. I would like to see the wiring and fitting the new stereo back in.

[@sylvainflant722]

Thank you from France, for all your tips. Now I'm ready to add an android stereo on my "T25".

[@kostasdelidimitris7765]

thank you very much, following only your video I replaced my avensis factory radio cd with a powerful pioneer. thank you!!!

[@Kubiccal1]

Thank you for this video. I just changed my radio yesterday, very easy to do it. Many thanks ...

[@sakkmatt7048]

Massive thank you for the video from Hungary!

[@SoulFoodEqualsMusic]

Thanks big help!

[@robindahlsundsb8106]

you should start doing tyson fury impressions haha

[@nike3web]

thank you, this was very well explained.

[@mckoholic]

Just got one, will try to set it up pretty soon. I am so excited :)

[@mioszlinkiewicz4272]

Great video

[@kogi04]

This video is golden. Thanks!

[@Theseones]

This was really helpful, thank you!

[@Steinninn]

Thanks for the tutorial.

[@swedemake5571]

Excellent instruction. Thanks

[@JADE-7000]

Thank you

[@xkILAkOKONUTx]

Could you please give a list of all the parts you ordered. Thanks.

[@stegreenall5311]

Video cuts out 8mins 15 secs into it, is there a 2nd video?

[@PJsprojects]

Anything is possible but you may need to extend the radio wires and make a custom mounting solution.

[@floor_jack1441]

Your video is very useful but there's a problem I'm facing after installing the OEM Radio there a gap between the Radio and the side plastic that you pointing at 4:06 so I fix that gap

[@kennethdemeester4069]

Thx mate!!!

[@imissyounz3935]

My car has a light on the passenger button. And there is a warning sound when driving. What should I do? and what happened

[@zolilefukuzana877]

I have avensis 2004, which this kind of radio, i want know if i can change the radio and insert the one which can both CD player and USB?

[@beniczech]

Hi, please, does anybody know which type of bolt is there? I think it is Torx? Thank you for any advice :)))

[@grilsegrils9330]

Since I am recycling my car tomorrow. Can the climate control unit be used as a computer (tower PC) fan control unit or something? 😁

[@PJsprojects]

While anything is possible it’s not really worth it.

[@mizanrahman9666]

Are able to do a video on how to hardwire a dash cam on a avensis 2009 please

[@ndubuisiemmanuel8744]

How do I locate the radio amplifier for avensis 2003 model

[@SVILESIS]

I have changed my old head unit to OEM B9010 one and my steering wheel controls stopped working... I just wanted to ask is there a fuse I might have burnt?

[@PJsprojects]

Nope sadly not, steering controls work on a resistive circuit so the control is either not getting a signal or has simply worn out.

[@mrfreshafrica3532]

OK but how about the aux

[@devbenson7747]

No wiring guide?

[@PJsprojects]

This is a removal guide with general advice, no wiring guide included.

[@doesntmatter1119]

Gypsy king is it you? 😋

[@zZZSPARKZZz]

What if you have scratched the interior I have anyfix??

[@PJsprojects]

No real fix sadly other than replace the parts that are scratched.

[@guoitdreuy]

Where's the rest of the video?

[@PJsprojects]

guoitdreuy Is the video not fully playing for you?

[@guoitdreuy]

PJs projects It stops at 8.15 in mid sentence. Great video though I'm sure I would have ended up scratching my dash.

[@JoshDownes]

PJs projects hey man, video cuts out at 00:08:15 when you are in the middle of saying and screwing in the new radio. Is that really the end?

[@---H-E-L-I-X---]

@@PJsprojects I'm also looking for the fitting instructions of the new sterero and wheel control wiring please

[@konradc12]

@@PJsprojects This video ends part way through! You need to reload it, to show the installation of the Connects2 wiring and steering control adapters. Then show the new system working.