toyota camry muffler delete 2.4 2azfe COLD START and Warm Start

[@sethtaggs9497]

My camry with the same motor been burning oil at startup for like 60k miles now still going strong toyota for ya

[@TyroneBeSpazzin]

This is crazy my bmw 328 sounded just like this on a cold start had a 2.5 pipe also

[@XOZSKU]

camry gang.

[@XOZSKU]

@@Juupiter8 yUh!

[@michaelenright6814]

That sounds so good

[@crypticx1019]

did you have to cut it out or just take the bolts out?

[@bahdooe2963]

Better get them value seal or piston rings done

[@Juupiter8]

been this way for 130k miles after the piston rings got done by toyota, doesnt burn oil just smokes on most cold starts

[@TechDadOG]

My camry solara 2.4l also smokes on cold start ups but doesn't burn oil.

[@OU812NVME]

I was thinking about doing this to my 1994 two-door coupe Camry but it's got 394 thousand miles on it or I'll just drive it to the motor dies

[@bahdooe2963]

@@OU812NVME with that many miles I would just buy a replacement motor and start building it just swap it in

[@kennethbryan3738]

My 2006 camry does smoke exactly this way. .i think it's excess fuel from a cold start

[@cheahkarfai9469]

Hi bro, you just cut out the muffler behind or remove the center bullet also?

[@Juupiter8]

muffler only

[@celsalazar77]

any in cab drone, if so is it too loud

[@Juupiter8]

only loud when accelerating, no sound at cruising, also has random loud bangs

[@dustinlanphear422]

Does this car burn a little oil on startups

[@johnmills1413]

My 2azfe had that oil burning issue but was supposedly fixed. Burns oil at startups every once in a while only in winter

[@Sarandub]

2AZ-FE burns oil since 2007 till 2013 approximately. Earlier models are good with this

[@FerdinandCoding]

4 cylinders?

[@omar123-m9p]

yep

[@Ameratsify]

Is this an LE? What model and year

[@wyattsho]

Looks like a 2007 SE to me

[@traveler_SEKAI]

this makes me want to unclamp my already aftermarket straight through muffler....

[@traveler_SEKAI]

@@Juupiter8 are you real

[@dylanischilin9286]

Bro same I got the flowmaster fx and it’s just not loud quite enough. I would like just a tiny bit of rasp

[@TheFS2004pilot1]

Hey man, what size piping did you use? Thanks!

[@Juupiter8]

2.5 inch

[@ibrahimkadiku5443]

Was it welded on or it was just screwed in

[@FerdinandCoding]

@@ibrahimkadiku5443 looks welded

[@omar123-m9p]

​@@ibrahimkadiku5443its just screws no need to cut 👍🏼

[@chief8609]

This isnt even a 2azfe its a 2arfe the 2az is actually a 6 cylinder when this is only a 4. I can tell by the sound since it sounds exactly like my 4 banger.

[@Juupiter8]

lol

[@jonethenseyoum4387]

Go ask google what type of engine a 2azfe is smart ass 😂

[@BaphoMedia]

3MZ is a 6 Cylinder. The 2AZ-FE in America is a 2.4 liter inline 4 my man and this car and a few scions have the 2.4 2AZ-FE inline 4

[@dallasdelano9147]

you need a tip thats why is sounds like that

[@mosesm5670]

Does it make a difference in sound if the muffler is just straight out or if you have a pipe welded in?

[@rt2255]

Rotflmao can you say rice to the max. Who ever thinks this sounds good needs hearing checked.

[@kirkleaman6863]

Y🤣