Toyota Corolla 2021 parking sensor fault fixed, light flashing but no faults stored in PDC control u

[@dp4108]

Thanks for taking the time to make this video just had this bumper off 3 times ,no codes just 2 sensors temporarily unavailable on scan ,thanks your a gentleman cheers

[@ecubru]

Glad it helped. Thank you

[@bradleyjones5466]

We have the same scan tool as well which made it so easy!

[@Jimmy074x4]

I have the snap on triton d10 w latest update can’t find how to do this, under special functions all I can do is customize setting initialization. Any help?

[@ecubru]

Hi Bud if it’s not in special functions the tool won’t be capable unfortunately

[@dp4108]

Just used this again 1 year later cheers

[@frankkaiser1252]

Which OBD device is that? I am having the same issue after replacing one sensor on side front bumper.

[@ecubru]

It so a launch

[@bradleyjones5466]

Amazing video mate, helped me in work today and got me right of the do do!!

[@ecubru]

You are welcome :)

[@tulgashd]

hello Thanks your video. I have one problem. what's fault is C1A79 clearance sonar system

[@ecubru]

Hi do you have a description next to Fsult code?

[@sabrialqaza3361]

hey brotha , i have a 2021 highlander same issue , but the scanner saying c1ae187 ultrasonic sensor (front left corner) missing , but its there its brand new

[@abidf9130]

Hi did u fix this issue what was it I got same code message

[@grechy6190]

Great save with the video mate thabk you

[@tasneemyasir8715]

what car computer ur using

[@aladdinmch4405]

Mate your are a legend

[@juleshere5201]

This saved me today 🙂👍. Great tutorial mate 😉👍.

[@ecubru]

You are welcome :)

[@juleshere5201]

@@ecubru I would do the same, but unfortunately I work in a very fast paced environment and have no time waste 😮‍💨. Again thank you 🙂👍.

[@SwedishHunter77]

Hello, Please do you have an idea why OBD2 could not find any error codes regarding to the 'Parking Assist sensors" After (Front bumper&4 OEM Sensors) Have been replaced in my Toyota Sienna 2021/XLE. While dashboard display still showing not active. Do I need to do this process of caliberation or NOT necessarily? Thanks

[@kheang9016]

Hello, did you find the solution?

[@SwedishHunter77]

Yes, it needed caliberation but was abit tricky n@@kheang9016

[@SwedishHunter77]

@@kheang9016 Yes, it needed caliberation but was abit tricky

[@navidhussain4569]

What scan tool did you use to calibrate the sensor

[@SwedishHunter77]

All i can remember was called AUTEL Maxicom (Not sure what model) since long time ago used my friends' bodyshop to fix it by myself. Anyways the trick was when i selected "auto scan" does not show all full vehicle components list while i had to select "manual scan" instead of "auto scan" showing additional components on that list, then did relearn putting angle rates on each collision sensors on the bumpers. I do not know why CrazyToyota had designed this way( i believe on purpose lol to never let anybody can work on it just Toyota dealers) This is Toyota!!😂😉

[@joshevans3614]

What launch tool are you using?

[@ecubru]

X431 pro

[@joshevans9874]

After I did it my PKSB sensor light is now flashing. Has anyone had this issue?

[@ecubru]

@@joshevans9874 are there any fsult codes? This procedure fixes the flashing light

[@joshevans9874]

@@ecubru no codes show up on the scan. The parking assist stopped flashing but the PKSB started to flash 🤣

[@ecubru]

@@joshevans9874 do a complete vehicle scan or run process again and change figures to 2

[@carlos90970]

Thanks mate ! I fixed alphard same problem

[@ecubru]

You are welcome

[@helennc7466]

Hello, I have a problem, Toyota car parking assist image can’t display after general services, screen flashing only, but navigator and other functions are work properly, checked cameras are good, no error code.

[@vernongent1020]

if you still have this problem make sure to call h and v autoeletrical search the number on KZbin

[@zeeshanfaisal4058]

Hy i have toyota camry 2021 clearance sensor working well but light in panel still ON not flashing or off it,s still on have any idea? or do this prosess with another digit? like 2/3/4

[@ecubru]

Hi, do the sensors work now?

[@zeeshanfaisal4058]

@@ecubru Yes sensor is working properly but ligh tis still on

[@ecubru]

@@zeeshanfaisal4058 I will be honest I’ve not seen that before. The angle won’t matter. Is the light yellow?

[@zeeshanfaisal4058]

@@ecubru YES YELLOW LIGHT . THIS FULT HAVE THE ONLY TOYOTA CAMRY 2021/2022

[@LuisPR90]

Hello quick question, my car is standard and the park is a botton, i have a sensor that is a P in a circle like the parking and up outside the circle it has a little A. What is that?

[@ecubru]

Hi if it’s the button I think it is it is for the stop/start Automatically cuts out at traffic lights and restarts when you release brake if switch is in on position.

[@LuisPR90]

@@ecubru it says (Pª) OFF

[@abidf9130]

Hey I have the same fault but says scanner saying c1ae187 ultrasonic sensor (front left corner) missing , but its there its brand new

[@ecubru]

Try the same process Should reset Ecu, failing that you may have wiring fault or pdc module

[@abidf9130]

@@ecubru I've fitted a new patking wiring loom and that didn't do anything. Looking on my autel mk908p scanner I can't seem to find that option .. also the front left sensor I swapped with the right side still same error can't be sensor as fault don't follow

[@navidhussain4569]

Try change it with one of the other sensors in the middle.I had same issue both left sensors were saying missing until I moved the centre grill sensor over to the right corner now I have no fault codes present just the lights flashing. Will try and calibrate them using the launch.

[@pixelrocket66]

What tool are you using?

[@ecubru]

Hi I am using a launch in that video x431

[@pixelrocket66]

@@ecubru thanks

[@aidasvalunta3785]

My one is giving an error? When I put one or two other numbers are out of range

[@kingg99991]

Thank u man

[@TheMaliheydari]

my colrolla parking sensors had problem so i put new sensor from toyota now not registering says unable to comunicat with control unit

[@navidhussain4569]

Did you manage to fix the issue my Corolla 2021 is doing the same. Loses communication with the module and goes back to the previous menu.

[@padraicscarry188]

Worked

[@rafyraffy85]

This is not corolla mybey haylander