toyota corolla car headliner install

[@MarketingCoachKen]

He started off good telling you how to remove it. After you remove the screws, and pry open the front and side panels, pull out the headliner through the front right door. Get a large wire brush from the Dollar store, and scrub all the old foam off. It should take at least 30 minutes to clean if you work fast. Then choose your soft thin fabric, and buy some 3M headliner adhesive. Spray glue on the headliner, then apply your fabric.

[@gerardomontoni2866]

It looks worse then what it was . He's a kid

[@YouDontKnowMe210tx]

So you have the headliner board and the fabric. I need to replace both. I have a 06 Toy Corolla Ce

[@official1samuel577]

i just replaced the fabric the board was still good

[@YouDontKnowMe210tx]

@@official1samuel577 do you recommend commet cement ( mightve misspelled the name of the brand) to hold the fabric and headliner board together? Maybe just stick with an adhesive spray? Also my car i pretty only have two headliner clips or retainer clips holding it up I need more clips but I don't wanna purchase online and it be the wrong ones. Any suggestions on that? Thanks for responding.

[@ganeshnarayan5505]

hey dude why not take the whole head liner out then use 3m spray glue then fit the fabric on yo the headliner makes you job a lot easyer just saying.

[@krissandoval1230]

Pretty good job. Maybe spray adhesive wouldve been better. Kinda costy but better results.

[@learnccnacybersecurityande7382]

the question is where to purchase the headliner? Ebay, autozone, advanced auto, rockauto? what is the toyota has a sunroof, just cut a portion out for the sunroof panel and glue it directly to it?

[@official1samuel577]

you can find headliner material on ebay but i got it from walmart - make sure to use glue from a spray can - a sunroom will make it much harder so try to find a direct fit for your car

[@Adriloves03]

Spray glue from fabric store instant stick and mold....just sayin

[@official1samuel577]

was planning to do tat but forgot it at the store - it happens

[@pamkochery1451]

this was great - easy- love the thumb tacks- i am going to leave them in-

[@vader0ne]

I have to do mine .I bought Denim and am going to remove the head liner and use wire brush and gorilla spray glue. Should do the job. oh the fabric cost only $14 at hobby lobby 2 yards should do it.

[@colochokid2128]

We're can you find that?

[@official1samuel577]

Walmart or any fabric store

[@smashrugged]

I like the thumbs tact too

[@carlcasteel6862]

i wish you good luck and happy wrenching bro, dont be afraid to look up how to do the job before attempting it .....

[@carlcasteel6862]

I apologize bro. That wasn’t cool of me. Only way to learn is to do. And I really respect you for trying to help others learn along the way. It’s not like my lazy butt is willing to post a video myself. I had a stick up my butt because I was having a hard time with mine LOL Just out of curiosity, did that glue hold up?

[@official1samuel577]

Surprisingly - still works great

[@josueperez1659]

how's your eye

[@official1samuel577]

hahaha

[@rasummers1]

Looks very good but I don’t think I can do it.

[@official1samuel577]

Yes u can

[@rasummers1]

@@official1samuel577 Well I did it and it turned out great. The fabric I used was thinner and the glue showed through but I left the tacks in and looks great. Thanks for the video

[@modswithcris2684]

nice job bro! i wish i would've done this to my 94 prizm.

[@official1samuel577]

Thx bro. Cant wait for ur next video!

[@ReecesAutoHeadliningRepairs]

👍

[@Decrosion]

hey whats up urself bruz? thanks for the video from Australia!

[@tammygibson1556]

That was very helpful. Thank you.

[@jairmoreno9807]

That’s clean bro

[@tetesasmith7189]

Thank you so much! I like it.

[@pattiboychannel311]

Well done buddy

[@towaynewilson7540]

Looks easy

[@azrael758]

👀👀👀👀 WTF!!!! 2/40 will blow that Elmers held on liner.....ghetto bro.🤣😂🤣😂

[@seckgong]

looks great dude... that glue stuff is expensive and a mess... i like that you just went for it and did it!!!!!

[@chrish1695]

This is a nice attempt. But you should have just done it the right way. First that glue will fall off within a few hours on a hot day.

[@official1samuel577]

The part got edited out when i explained to use can fabric spray

[@jordanthistle2360]

So many things done incorrectly, first off that foam is on a board that board is supposed to be taken down then you reupholster is and put it back in. Wrong type of glue, you need to use fabric glue that is meant for car fabric because as soon as it gets hot out that glue is going to soften and it will start falling down. The thumb tacs are going to leave holes in the fabric making it easy for air to get in and over the top. Please leave this stuff to professionals.

[@markwalker3907]

You should have watched the video before you started doing that LOL I got a good laugh

[@jordanthistle2360]

@@markwalker3907 huh ?

[@chrish1695]

Easy for any joe to do it as long as it is done right. This was way off from correct and gives me anxiety knowing he could have spent the same amount of money to do it correctly 🤦🏻‍♂️

[@nicholasoneil7693]

I like it

[@ainsleysearslimgenco8448]

Hahah really just glue. Hehehe

[@official1samuel577]

Use spray glue i forgot it at the store

[@ladyofwisdom2]

That looks great...great job😚😙😊

[@RJHERO]

Heyyy madtown all day lol...

[@azrael758]

Dude...might as well paint it with a roller and latex paint or put bathroom tile on it...F' it bro....smear dog crap on it and call it stucco.....or stinko....💩

[@mohammeddashti6884]

It is ugly