Toyota Ignition Lock Recode: a Locksmith retraining, tips and assist, video.
Пікірлер: 53
@katherinegarberding95306 жыл бұрын
Thank you SO much for posting this. We lost the key, and the locksmith told us $240 to make a new key. But he said if we can "pull the switch before he got here... He would knock $50 off the price.". Well... I called the auto store and the ignition switch was $46. So, we looked it up on you tube and saved over $200! Thank you AGAIN for posting this!!!
@tightlinestanlines2506 жыл бұрын
Yes and now your ignition is not up to code.
@hectormontes67234 жыл бұрын
Ok Katherine, I know, but you need to use 2 keys or not? wath happen to the door key?, your vehicle is open all time? I Don't understand. You only think in save money, locksmith need work yet
@EWM8883 жыл бұрын
Ok
@robertangeles95377 жыл бұрын
He feeds you with information but withholds the most important thing - how to re-code the key. Which basically is rearranging what's already there to fit the original key.
@phx10690 Жыл бұрын
Very very well explained sir. Enjoyable to watch.
@jameshaywood71333 жыл бұрын
i have done one of these ignition barrels before i decoded the door lock then used instacode to find the last bitting that was needed for the ignition . i just made a video on Nissan patrol decoding as well
@dennisforster42416 жыл бұрын
Thank you for this video. My 98 4runner has two keys,...one for the doors and one for the ignition. I purchase it a week ago and don't like using two different keys. Pulled out the ignition switch and will bring it to a Lock Smith to have it re-coded to the door key. Thanks for the help.
@121285062 жыл бұрын
At 7:05 - how did you get the pin that holds the face plate out?
@lukemartin70297 жыл бұрын
At 7:20 how do you actually get that cap off? Did you edit that out on purpose??
@dereckonkle9275 жыл бұрын
What time u want me there
@youtubeaddict42714 жыл бұрын
He shows you @ 7:06. And if you think I am being funny, I am not. Maybe just take another look. Watch the whole video again. He shows you how he took the cap off twice.
@tompeterson28974 жыл бұрын
why not just pick the toyota lock cylinder or drill straight into the hole the detent is in it's an easy job find the drill bit of proper size and then you can recode it or put the pins back in place for the lock.
@joemartines22587 жыл бұрын
after you drilled out the retainer , isn't that retainer gone now? I saw that you refilled the hole but that retainer had a purpose of holding the cylinder in place. Is that correct?? So what happens with the retainer that was drilled???
@simonhamel20956 жыл бұрын
What'd he fill the hole with? How is the ignition lock staying put?
@wutevarr40285 жыл бұрын
Dammit! I wanna know as well!
@lambertomidolini8027 Жыл бұрын
What did you use to plug up the hole?
@pouncerminned863 Жыл бұрын
more importly, how did he fix the retainer so it holds in place since he drill it out
@lambertomidolini8027 Жыл бұрын
Maybe with a poxy putty
@pouncerminned863 Жыл бұрын
@@lambertomidolini8027 yea i suppose. I think i would just replace with new ignition lock after recoding it, I am locksmith and have done a lot of these, but never reused a drilled out retainer ignition lock cylinder
@lambertomidolini8027 Жыл бұрын
I’m a locksmith myself automotive I just use Lishi tool
@Kwilson38287 жыл бұрын
Good video, but it would have been more helpful if you would have shown how to actually remove the cylinder cap instead of skipping ahead. I have this very cylinder and cannot get the cap off to save my life
@r3woods5 жыл бұрын
I figured out a method for removing the cap. Step 1) There are two pins that exit the back side of the cap/bezel and are peened over onto the body of the cylinder. I drilled those out. Step 2) There is a tab that extends perpendicular to the plane of the cap, inside of which there is another pin, driven into a pocket on the cylinder body (which is between his three fingers at 7:32). It must have been driven in at the factory, because I was able to force the cap off after doing just step 1 and drive the pin out from the inside. It might be easier to just drill it out. If the cap doesn't come off easily at that point, try placing it in a vice so it is just catching the bottom edge of the cap, then, using a small dowel in the key opening, tap the cylinder away from the cap. Hope this helps.
@wutevarr40285 жыл бұрын
@@r3woods does this destroy that cap? I want to just rekey, but want to retain the cap as well.
@pouncerminned863 Жыл бұрын
@@r3woods dont drill it out, they are easy to remove.
@lowbornCO4 жыл бұрын
Pointless video! The most important information is withheld! Then he implies that locksmithing is somehow above the average person’s abilities. Ha!
@pouncerminned8632 жыл бұрын
its not that locksmith's are above anyone's abilities, but that the locksmith is "qualified" to do this, ethics
@dam4958 жыл бұрын
nice video, friend, can you show how to do it, on citroen/renault/peugeout , models? recode locks
@dam4958 жыл бұрын
how about chevy s10, can you do a video about it, showing how to dismantle cylinder lock from ignition, and cut a key,
@mrkiltcha1ify5 жыл бұрын
Whats the long bar coming off the back of the lock cylinder and what is its purpose?
@fazilabsolam46123 жыл бұрын
Hi where can i get the parts to reprogram the cylinder?
@willm8373 жыл бұрын
Parts used to "recode" lock cylinders, are sold to locksmiths, in various ways; some by kit, others can be purchased individual. You can also use parts from a similar lock.
@tomandkaren1573 жыл бұрын
So you removed the button that holds the lock in the cylinder and now anyone can remove it.
@estelavargas85697 жыл бұрын
hello good sir I have a ??? can you switch the key . for a 1993 pick up switch for a 1996 Toyota 4runner. switch
@gbankson19684 жыл бұрын
Great Video!!! Thanks
@alieumanneh3662 жыл бұрын
Hi
@datawind32965 жыл бұрын
Interesting video, but once you get the old cylinder out, you can buy a replacement cylinder with brand new keys for less than thirty bucks.
@JesstheGeologist5 жыл бұрын
But then you would have different keys for the door (and trunk) and the ignition, right? I think this is why recoding the ignition lock to the existing key is desirable.
@thehomeofmemes5 жыл бұрын
@@JesstheGeologist You are correct, unless you want to re-code the door/trunk lock cylinders to match the ignition key....in which case you'd have a full matching set.
@2815Juan4 жыл бұрын
In this case. The original lock was destroyed and needed to be replaced. And for the life of me why would you want two different keys for your vehicle. If someone tries to save a buck, at least rekey the new cylinder to match the original key
@sathishgowda58625 жыл бұрын
Toyota Etios, inserted duplicate key. key for locked.How to remove
@ramireznico5 жыл бұрын
Hi i got a 4runner 2002 and issue comes when you start the car while is in on position you can take out the key from ignition switch what is wrong there.
@2815Juan4 жыл бұрын
Worn out key more than likely. Go to a locksmith and get a new key cut by code
@zero83238 жыл бұрын
Buen video!
@Reggie.Caballes5 жыл бұрын
Good morning, where are you located? Are you from Guam? I have a client who lost his key for a 2007 Dodge Caravan there in Guam.
@willm8375 жыл бұрын
Hawaii my friend.
@sunnydeo1234 жыл бұрын
Now recode my brain too after all that brain fuck
@PierreDaGriot6 жыл бұрын
thnaks
@thatdapperman5 жыл бұрын
This video is absolutely useless except for the drilling the lock cylinder out.
@sistercalhoun44445 жыл бұрын
Mann don't make and video and not show Everything ! Hosea 4:6 . My people are destroyed for a lack of Knowledge . Bro you can't take it with you and neither can I. I mean it in Love Bro ! But I'm Forreall buy Wisdom and sell it not.
@willm8375 жыл бұрын
Amen, Bro. Howbeit, it is not my intent to "train." Rather, to offer "tips" to those who are "trained," and/or need a "reminder" on certain aspects of our trade/craft.
@sistercalhoun44445 жыл бұрын
William Mcintosh Naa.
@willm8375 жыл бұрын
@@sistercalhoun4444 One of the good things is: having the "drive" you display; using a portion of the finances that God has allowed you (that you can't take with you); one can register in "formal training," and STOP trying to use KZbin videos as a "Free" course. For such is the "way of the thief who [instead of entering in at the door] will climb up another way." Be blessed, bro.