Toyota pick up 94 rear speakers

How mount a 97 Tacoma speaker brackets and covers on a 94 pick up... Toyota 22re

[@jimmypage4162]

Awesome ! Looks great man I love factory interchangeable upgrafes

[@danielhondagenaej1-22re-rd1]

thanks

[@daveb4128]

Main takeaway is that the speaker grill can replace the pocket! Probably would have been less work to have made my own mounting panels out of thin plywood, and I could have used the plastic inserts into the HiLux body in all 4 locations - have to cut the top off about 12 5/8" up from the lower step (just under the upper angled part), and move the lower mounting holes about 3/8" down & inwards to line up with where the lower plastic inserts pop into the HiLux. Need longer screws for them, also carefully measure & drill new upper holes since you can't use the upper insert holes there, and limited metal available! But they will line up with the grill opening if you do this.

[@madelynhoude9158]

Hard to find options for the 94 pickup xtra-cab. Next time I'm at the junkyard, I'm gonna try and source some of these. Did you just run extra speaker wiring from the front to the back, or was yours already pre-wired for rear speakers? Mine is just a storage compartment currently

[@danielhondagenaej1-22re-rd1]

Well. The factory radio has only 2 channels. In order to do this i found an install a 98 4runner factory radio and amp. All factory... so yes you will have to run wire to it

[@travolous]

Would have loved to see the important part of how you modified that mount because they will not bolt into an 89-95 pickup. Nothing is the same.

[@Jose-rm9gh]

I have a 2003 trying to figure out the size for the rear acces cab speakers??

[@danielhondagenaej1-22re-rd1]

If is tacoma 6x8 front and rear....

[@Jose-rm9gh]

@@danielhondagenaej1-22re-rd1 thanks a lot for confirming

[@kerrjason8537]

Well done I'm looking for rear speakers also I have 89 Toyota pickup ext cab to 96 2000 Tacoma works ?

[@danielhondagenaej1-22re-rd1]

Yes. Just have to trim the speaker bracket little bit in order to fit. The ones on the video came out of a 97 tacoma

[@kerrjason8537]

@@danielhondagenaej1-22re-rd1 did you replace the rear trim panel looks like I have to cut the cubby hole out

[@kerrjason8537]

@@danielhondagenaej1-22re-rd1 273966916715 ebay item number that's what you used

[@zaibdarbaloch4533]

I have 1984 double cab please tell how to install rear speakers

[@danielhondagenaej1-22re-rd1]

I never have done a 84. But i will find out sometimes

[@zaibdarbaloch4533]

Thanks

[@UmarFarooq0300]

What is this?😂😂😂😂 Nice video

[@danielhondagenaej1-22re-rd1]

Im glad you like it