Toyota Prado GXL 2009-2012 Head Unit Installation

Full installation of our VHEDIA TOYOTA PRADO GXL 2009-2012
www.vhedia.com.au

[@lensman7519]

Thx man

[@vhedia6947]

Happy to help!!

[@amberoreo8330]

Hi, was thinking of upgrading my head unit whilst using original camera….do you think that the colours you get on the new head unit are the same or better than the picture you got in the small original screen? I have always found the original reverse camera setup very lacking of colour in my 2013 model. Thoughts?

[@vhedia6947]

Hi, Yeah it is better as it bigger and a HD screen however it looks worst quality just as the screen is bigger. But as a whole colour is better and easier to see. Cheers

[@petegangies]

do you have a solution for a 2010 ZR Prado (3 door short wheel base), that will integrate all the factory cameras and steering controls etc?

[@vhedia6947]

Hey, mate. We may need some pictures of the head unit and dash, and also the harness. You can reach out to us via email at [e-mail] or through our website's live chat.

[@kaush00112]

Hey guys, Connected the two blue wires with the orange/black wire on the main harness. Then connected the RCA plug with the cam in plug. But the reverse camera feed still doesnt come out from the screen(andriod headunit). Bottom screen(oem) is black. Do you have any idea what i might have done incoreectly? Thanks!

[@vhedia6947]

Hey, mate. Please reach out to our chat, email, or phone: vhedia.com.au/contact/

[@Bannedone3ice]

26:06 Hi, did you change the panel for fitting the Android unit ? Because it looks like the 2017-18 model panel. Or is it the same one you took out ?

[@vhedia6947]

Hey, mate. This head unit has it's own fascia. It should look like the factory one. Not the same as the 2017-2018 ones.

[@TechManPat]

Hey Guys, great video, could you link me to the extension little plugs for the hazards, that you showed at at 1:53?

[@Hellothere854434]

Just search male to female jumper wire on eBay

[@TechManPat]

@@Hellothere854434 ​ @Hello 2030 Yeah i got these but they are too large for the male pin, which means they wont even hold if i tape it down...

[@Hellothere854434]

@@TechManPat your best bet then cut the wires and just make them longer, tape it up and should be ok

[@vhedia6947]

They should fit mate. Cheers

[@TechManPat]

@@vhedia6947 hey mate, have you got a link to the specific ones used in this video?

[@lukegalvin9869]

Great descriptive installation video. 👍. Does the din unit run Android 12 version with no issue?

[@vhedia6947]

Hi, These are Android 10 still the A12 is not stable yet and this is a complete hardware change inside to run it. Cheers

[@Bannedone3ice]

28:45 In my 2013 JDM, I don’t have the lower screen. What functions does that have ? In my 150 it is storage with a cover.

[@vhedia6947]

It's a trip computer and for reverse camera.

[@kevindeen2074]

Excellent video, alot of info. Can you please include a link for the harness that you plugged into the display screen with the video signal out.

[@vhedia6947]

Here ya go :) Link: vhedia.com.au/product/video-retention-to-suit-toyota/?cgkit_search_word=Video%20Retention%20to%20suit%20Toyota

[@Khalid-Mengal]

Hi, can you please share the link for the dual usb adapter.

[@vhedia6947]

You can visit our website and choose from the options we have available. Here's the link: vhedia.com.au/product-category/chargers/panel-switch-chargers/

[@binomf]

Hi I want to install this same head unit in my 2013 model prado. Could you please let me know from where I can order this unit??

[@vhedia6947]

Hi, Online mate - vhedia.com.au. Cheers

[@sniperneil53]

I have a 2011 Prado Kakadu. I want to change the head unit for one that I can use Apple Carplay etc.. Is this unit compatable or is it an Android unit?

[@vhedia6947]

Hey, mate. We will have Tesla style head units to fit the Kakadu badge out soon. You can check our website www.vhedia.com.au for more info. Cheers.

[@chevymcgarvey2117]

Hey bro awesome video, can you connect a sub woofer to this head unit ?

[@vhedia6947]

Hey, mate! Can do. We have preouts for the speaker channels and a sub.

[@tckoroglu]

I have VXL with Navigation screen, JBL and Back monitor. Is there a compatible version with mine.

[@vhedia6947]

Hi, We have a new model that will work with that as you have factory amp etc. Keep a eye out. Cheers

[@sayedafg8280]

Thanks for this video , where can buy this nut type form

[@vhedia6947]

Nuts and bolts come from our manufacturer. We don't sell them. Please visit our website and reach out to us if you have any questions or concerns.

[@megadush]

Hi do you have an upgrade for 2015 Prado models?

[@vhedia6947]

Hey, mate. We do have head units for newer models as well! Just send us a photo of your current head unit and dash, and confirm year model and badge so we can check for stock availability! You can reach out to us thru live chat or email us at [e-mail]

[@Speedi-tm5dm]

Hi Boyz Awesome vlog. Do you guys know someone I can get to do this upgrade for me? Where Are you you guys based?

[@vhedia6947]

Hi, We can do it in Perth WA, If not here just contact local auto sparky. Cheers

[@gxl1976]

Surely it must be possible to rejig the hazard switch so that it sits the correct way around, rather than look like a give way sign.

[@vhedia6947]

Hi, It is a bit hard we are working on it but it means 1000pcs we need to mould up so that would be a few years of stock.

[@TheTrinifun]

Can you send me part numbers for dash kit complete and which radio you use please

[@vhedia6947]

Head unit and fascia is sold as a bundle, mate. You can visit our website for more info www.vhedia.com.au.

[@user-rh3kc6je5h]

Where can I buy this and how much!

[@vhedia6947]

Hey, mate. You can check our website at www.vhedia.com.au. You can also reach out to us via live chat or email us if you need assistance.

[@grantsimmons453]

How much is kit

[@vhedia6947]

Our kits are priced at $978.00 AUD. Reach out to us thru livechat or email us at [e-mail] if you have further questions.