What amazes me is how this steel can be pressed into these different shapes and not rip. I am glad this has been figured out or otherwise car styling would be really boring.
@brydenturnbull974911 ай бұрын
The metal can rip, tool makers make use of somthing called draw beads and fine blanking techniques to help support the steel and help it flow into the desired shape and surface finish. They use ait bolsters or cushions on the bottom die to achieve duel action to prevent the top die and punches from stressing the steel.
@pba215 жыл бұрын
Wanna see the wiring in the control panel..woaw, must be a masterpiece. Good job!
@adityaprayogo57295 жыл бұрын
Thank you Toyota, you had changed my life and family.
@davidbrant50673 жыл бұрын
Typical general maintenance , 3 members to one problem . Tool and die 3 repairs 1 member . Sounds familiar?
@tpaine1212 жыл бұрын
So true - I’m a journeyman die maker and always swamped
@luishurtado69022 жыл бұрын
Im a toolmaker thats why i say people have no clue the building of tool die, its a 99% brain job
@user-bz1qd5vh6s7 ай бұрын
Можно свами пообщаться
@kenprice196118 күн бұрын
Very few humans are involved in the manufacture of an automobile except for simplistic little tasks!
@jkeelsnc4 ай бұрын
Given that this is Toyota I know that the quality of these panels that are stamped is the very best.
@EngineeringFun9 ай бұрын
I remember the Camry that was made in Japan, with Japanese parts before 2002. It held together and was practically indestructible, especially the mechanical part. I owned two, my wife wrecked one of them and my son the other. The ones made locally after that are no different than Chevy, Dodge, Hyundai or Ford.
@madamerotten11 жыл бұрын
I love my Toyota. Best car I ever owned.
@cooldog605 жыл бұрын
Junk!
@amirulakmal90093 жыл бұрын
nice
@amirulfikri87222 жыл бұрын
Can I borrow your video for my assignment?
@yonatantesfay55417 ай бұрын
Im turning 32 in January and i just applied for a tool and die apprentice position in stamping for tesla. Wish me luck. Im so nervous.
@user-bz1qd5vh6s7 ай бұрын
Можно свами пообщаться
@DYHARDGAMERS7 жыл бұрын
I work at one of these, no one tells you how many mistakes those robots make sometimes lol
@MuffinMan05215 жыл бұрын
One thing you don't see often is the actual dies up close. I think it's really neat to see how much more there is to the die itself than just the trimmed piece that is the result.
@1Barsamian4 жыл бұрын
DYHARDGAMERS a lot fewer than overpaid worthless UAW workers make.
@inalldimensions55482 жыл бұрын
Can u please send me the plans and areas of stamping shop
@jthanksitwaswhatineededkno2955 Жыл бұрын
I flew dies for 5 yrs
@P2Pbase5 жыл бұрын
Body-Side-Out. we made die like these for Matrici Spain. 5 times.
@luishurtado69022 жыл бұрын
Do car builders have skilled tool makers in house
@EngineeringFun9 ай бұрын
Replaced by CNC.
@cooldog607 жыл бұрын
Hard hats! LOL!
@luishurtado69022 жыл бұрын
People have no idea the skill tool makers have to build the tools
@brydenturnbull974911 ай бұрын
True that.
@EngineeringFun9 ай бұрын
That was long ago. Contemporary CNC machining doesn't need qualified people.
@weirdfishees1Ай бұрын
@@EngineeringFun you are talking about machinists, not tool makers
@digitalkoh5 жыл бұрын
Shows everything except actual stamping...
@fasuseno4 жыл бұрын
0
@MuffinMan05214 жыл бұрын
There's a million video's on stamping, but few that show the die sets.
@xe2bio644 жыл бұрын
Quality control only in Japan
@robertaccornero71723 жыл бұрын
HOW is the 'die' that stamps the metal into parts created???? they never ever explain how!!!
@alw30602 жыл бұрын
They're cast into molds then machined out using milling machines
@tpaine1212 жыл бұрын
Automobile die making really doesn’t use “molds” for the rough cast iron die…forming, flanging, trim, and punch surfaces are now machined but used to be all hand worked in the old days(23 yr journeyman diemaker). We still hand finish critical surfaces.
@Suterren Жыл бұрын
@@tpaine121 Also u need 5 tools to make 1 peace of body part ( depends on the part ofc ) . yea and cnc machine this days cant finish tool in that quality u need, so you have to hand finish form or active surfaces on tool , im working on cnc machine and we making parts for pressing tool then other guys building it together and testing it in press that is operated by workes not robots . Said in short term , whole proccess is way more complicated it takes 2 years to make one working tool
@user-bz1qd5vh6s7 ай бұрын
@@tpaine121 можно свами пообщаться
@theorfeu7 жыл бұрын
I want get a job there...what do I have to do? I'm engineer. Thanks.
@jariyajayveerjayveer65506 жыл бұрын
enjoy
@praisejohn73772 жыл бұрын
I'm a tool and die maker and have 5 year experience in hot stamping. I'm looking for a better opportunity in your company. How can I apply for the vacancy.
@user-bz1qd5vh6s7 ай бұрын
Можно с вами пообщаться
@jawwadtofiq3037 жыл бұрын
Toyota
@sukheshchampanerkar87956 жыл бұрын
Jawwad Tofiq . ..
@cooldog605 жыл бұрын
Sucks!
@montanasnowman31382 жыл бұрын
But what makes the tool what makes the guy I want to see other machine carves the die who makes the machine at Carver die