Toyota Suceed sound system build part 8... It's ready...

[@kleenmoney930]

Affi big up nismo..yu nuh hide ntn from we..some man wudda edit out all a dem mistakes n gwaan like dem do everything perfect...big up yuself youth!

[@krazyromeol]

Nizmo a 2 day now me pressure high enuh cause me nuh see the video. Mi nearly have heart failure a go pon youtube a refresh the page every minute

[@gregoryharrison8021]

Points to note, when there is black and white wire, black is live and white is neutral (Ground). Another fix for engine sound is to make the neutral (ground) wire bigger than the live wire and ensure all wire is connected tight tight. Don't let signal wire and current wire travel together. Ensure all signal wire is good.

[@CC03]

Cool bro I like they way you take your time to set up everything one set at a time always learn something new god bless

[@gregoryharrison8021]

Use the remote wire to control the relay, that control the fan. Still use the switch on the wire from the Relay to turn on the fan that the owner can turn on/ off the fan after the sound warm up, but if him no remember to turn it off when him shut down it will turn off when remote is off ( that's my suggestion).

[@mrspringer7255]

Run the fan on a relay and accessory and put a switch

[@krislatty1136]

yea man did a anticipate this vid for real the build is very attractive the looks alone wud sell it! wifey say she wah hear di bass! lol

[@travdreamchaser7670]

Machine a play sweet. Soon come build back a sound a yard fam

[@Ruce356]

You can use a 12V temperature control switch for the FANS..

[@dwaynehorne7390]

Big up !

[@justyna4276]

Clean 🧼 as usual

[@andreclarke291]

Use a LED light on the dash as an indicator to say when the fan is on.

[@chris_vandepeer]

Run the fans with a noise suppressor very easy to make.

[@jervainesimpson8918]

Try running the fans from another 12v source. Like the cigarette lighter and use a relay. Probably that helps

[@unrulytodd]

Clean an neat✊👊✊

[@heatwavesound.djezee909]

Colour code the amp rack and code the nutrik dem fi match with marking tape. Red to red yellow to yellow ect. That way no mistakes can't make even if all the nutrik are the same size..

[@johnjamce1146]

you can try temperature controller for the fan I got on my off grid solar system it has been working for 4 years

[@javaniecampbell8875]

🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥👂👂

[@EvahSlickMedia]

Relay with the coil from the main use remote turn on relay on positive line

[@nizmocarsoundstmary]

That's what I did. Did u watch the previous video?

[@EvahSlickMedia]

@@nizmocarsoundstmary going to check it out now

[@4G18SOHC]

I'm using a relay to turn on my fans and no engine noise!

[@blakkadandem4305]

Check ine......up and running 👍💯💯

[@amarirenno]

Clean installation.

[@djboyze876]

Know how long mi a wait on this bro

[@kenneilmontaque5694]

Love the look bro ,, but their's no audio on video

[@lamoyebrown8086]

Install a thermostat on the fan it just come on when it need to

[@kevin_davis1984]

Me a wait fi hear bout the fan connection too cause i have the same problem with engine sound

[@zjplatinumkid5430]

Relay

[@romainepope]

Use a relay pon the fan dem

[@sugaraeclamentay]

Try a relay for fan remote

[@876Dooley]

🔥🔥🔥

[@farmingyouthofficial7271]

Up mi general you must get lots of bookings?

[@dwaynethompson1753]

You can put the fun on really so you would not get any engine sound

[@NickRon06]

Where can I find a woman like her lol she seh she Wah hear deh bassss

[@nizmocarsoundstmary]

Jamaica bro

[@NickRon06]

Love the vids bro n your creative

[@jamainwallen8490]

Hey, i need your help on how to tune my sound. I have a cross over and pre amp, where do i set the nubs on the amplifier? Do they stay at zero and use the crossover and pre amp to tune it. I have two 1000w sub and a 2000w amp to drive them. A 2000w amp and four 6x9 for high and low mids

[@dwaynehorne7390]

Hey bro saw video from a longer time of you connecting horns driver but I can't find it.

[@cliffordslack7265]

add a relay for fans

[@ricardostewart4876]

Where in st Mary I can find u

[@nizmocarsoundstmary]

Galina. 8765947057

[@markdaley1464]

Question, why do you use a cross over when the DSP can do everything?

[@nizmocarsoundstmary]

That's the way the owner wants it

[@markdaley1464]

@@nizmocarsoundstmary do you send the main signal from the head unit to the DSP first and then to the crossover?

[@nizmocarsoundstmary]

Yes

[@markdaley1464]

Ok repect for the information 👌🏽

[@CC03]

Hey boss can I ask you a question are you , using the Hifonics Zeus for bass

[@nizmocarsoundstmary]

Yes

[@CC03]

@@nizmocarsoundstmary okay thank you so much boss I appreciate your help god bless you and your family.

[@CC03]

@@nizmocarsoundstmary hey boss check out the new Taramps T-0302 player I think you would like it for one of your set ups .

[@godgiftedtamarblueprint9191]

What's the name of the instrumental you used used to check the system

[@chris_vandepeer]

Love bump riddim

[@zjplatinumkid5430]

Relay

[@djboyze876]

Know how long mi a wait on this bro